Im running ubuntu 10.10 and i installed gdesklets and when i try to open it.it never starts im kinda new at all this so im not to sure what is going on.i have a hp pavilion dv7 laptop.
View 4 RepliesI can not run gdesklets in ubuntu 10.04.
When I do gdesklets check I got this message:
ERROR:/build/buildd/pyorbit-2.24.0/src/pyorbit-utils.c:39:_pyorbit_escape_name: assertion failed: (keyword_mod != NULL)
- ORBit ...Aborted
I hope this is in the right spot, and I have searched but haven't been able to find anything to help me out.
I installed GIMP recently, it worked for awhile, but now it will not open up even after the 'Starting GIMP...' appears. That goes and nothing happens. I've tried un-installing and installing via the software centre as well as via the terminal with no success. Will be happy to go through steps again if someone gives me some guidance.
I tend to watch the odd movie, and always use vlc. As such, one time I checked the box so that vlc would open by default. now however each time I go to open a folder, vlc starts up! How can I undo this?
View 2 Replies View Relatedinstalled corectly the program, but when I start it, it starts to integrate to the kernel, I got error and this is the log.
Code:
May 12 16:04:07.612: app-139838623995648| Log for VMware Workstation pid=25181 version=7.0.0 build=build-203739 option=Release
[code]....
Since I upgraded to 10.04, I went to launch gDesklets, and it will not launch. I looks like it wants to, spinning cursor and bar down in the task bar panel, but then it disappears.
View 5 Replies View Relatedrecently I installed gDesklets with some minor problems that I fixed along the way.. But now that it finally works, I don't see all the categories? For example, the System/CPU category is missing etc.. Here is a screenshot of gDesklets Shell open:So, the problem is that it's not showing all the categories needed.. So, any advice? Edit #1: I found out that what I was looking for was the SideCandy things from gDesklets.. And I tried Screenlets, but it doesn't have what I need and the look is not really me..PS. If anyone could tell me what "desklets" these are: [URL]- I would really appreciate it! The theme is Mira, but I tried installing it, but it didn't really change a lot of my main Ubuntu theme, and it didn't install the desklets
View 1 Replies View RelatedHow to open an application when fedora system starts.
View 4 Replies View RelatedI just made the complete switch from windows 7. I'm looking for a weather applet and a currency conversion applet for my desktop.
I tried gdesklets but I couldn't get any of the weather applets to work. They couldn't find weather data. The weather part of my gnome-panel works fine.
I also couldn't find a simple currency conversion tool with gdesklets.
Ps: major kudos for anyone who can find a tv guide desklet.
When i open any .pps file with OO.org (impress), it starts a slideshow and it doesn't let me edit the file. If i click on "end slideshow", the program exits.i ran it in a terminal and there's no error messages.[EDITED]Well, i found the answer, just renaming it to ".ppt".
View 2 Replies View RelatedI downloaded the Stats program R through the Terminal, but don't know how to open it.
View 6 Replies View Relatedi have installed namebench 1.1 using terminal. its saved to my directories yet i still cant open it.
View 1 Replies View RelatedI just installed starcraft 2 using playonlinux and wine. I was able to launch it once it finished the updates. I proceeded to amp up the graphics to ultra on everything. I did that then it crashed. i now can not seem to open it. Not through wine or on the desktop.
View 1 Replies View RelatedI installed tintin++ mud client, it installed successfully, but I can only open in the terminal, how do I find where it installed to, and make a desktop icon for it?
View 1 Replies View Relatedroot__________:/home/---# docky
[Info 15:10:25.304] Docky version: 2.2.0 bzr docky r1807 ppa
[Info 15:10:25.315] Kernel version: 2.6.35.28
[code]....
I installed Open SSH and don't know how to launch it from the terminal.
View 7 Replies View RelatedI installed office 2007 in wine but i can not open it,Is installed i can see it in wine
View 4 Replies View RelatedI installed Swiftfox, but it won't open. It has an icon, and it bounces then disappears. what else is needed to make it run?
View 9 Replies View RelatedI've installed 11.4 on the laptop. So far there hasn't been a huge leap of difference between the 11.3 and 11.4. But now I can't use Skype. It's installed and all of that. But whenever I open it, nothing happens.
View 6 Replies View RelatedI am a complete newcomer to Ubuntu (or Linux in general for that matter) although I have many years' experience of Windows. It seems to me that the Base application of the open office suite of programs has not been installed by default. Why is this? And how do I install it in Ubuntu 9.1?
View 3 Replies View RelatedI installed it using the ppa instructions here [URL] The terminal says this when I try to run the program:
tshipp@Harold:~$ openshot
--------------------------------
OpenShot (version 1.1.2)
--------------------------------
*** ERROR: MLT Python bindings failed to import ***
[code]....
Sometime after I upgraded to ubuntu 9.10 I've been having trouble with my wireless network connection.It will usually log on to the network, then disconnect a shortly after. Then try to connect again, usually successfully, then it cuts off again. Then connects again, then disconnects. FWIW, ubuntu 9.10 works on a different machine pretty consistently, so I don't think its a problem with the router.
View 2 Replies View RelatedI need to change the location and language of open office on my server. (Hardy)
Not sure why it wasn't installed on apt-get, but it wasn't.
I'd like to completely remove and start again fresh (this time with apt-get) How can I do it?
I've been spending the hours beating my face against the wall and going near insane trying to get arial fonts installed on fedora, so that they can be used in open office.
How might these be installed ?
yum -y install msttcore*
Loaded plugins: refresh-packagekit
Setting up Install Process
No package msttcore* available.
I have a problem related with certificate generation. I had successfully installed openssl. After that I do these.
[root@localhost openssl-1.0.0a]# cd /usr/local/ssl/misc
[root@localhost misc]# ./CA.sh -newca
CA certificate filename (or enter to create)
Making CA certificate ...
Generating a 1024 bit RSA private key
.........++++++
..........++++++
writing new private key to './demoCA/private/./cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank. For some fields there will be a default value,
If you enter '.', the field will be left blank.
Country Name (2 letter code) [GB]:IN
State or Province Name (full name) [Berkshire]:KERALA
Locality Name (eg, city) [Newbury]:KOCHI
Organization Name (eg, company) [My Company Ltd]:squad
Organizational Unit Name (eg, section) []:SUPPORT
Common Name (eg, your name or your server's hostname) []:localhost
Email Address []:jk.r@squadinfotech.com
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:mahhghh
An optional company name []:mca
Using configuration from /etc/pki/tls/openssl.cnf
Enter pass phrase for ./demoCA/private/./cakey.pem:
I am unable to access the ../../CA/newcerts directory
../../CA/newcerts: No such file or directory
Distro:Centos 5.3 kernel 2.6.18
When trying from the link which was in the applications menu, and manually from terminal I receive the following errors:
Code:
I have since tried the HOWTO: Install Azureus (newest, non-repo way) method of installing Vuze/Azureus, which I think is what I set up for 9.04, and also a synaptic complete removal and reinstall which didn't work.
I have an .azureus folder in my home dir which I would like to keep because it contains my settings and half downloaded torrents etc.
I would be happy to use the the synaptic packaged version of Vuze because it is much more up to date than it has been in the past.
First of all I must say that I am new to Debian, but not newbie on Linux. I am the Arch Linux user too, and I managed to solve identical problem on Arch. So, as I want to try Debian I am facing the same problem again. Problem is that my GPU is overheating. I am using Ati open source driver. I installed it following the procedure on Debian wiki. On Arch I solved it with proprietary driver fglrx. I tried the same solution here but it doesn't work. So I am stuck with open source drivers.
The difference between Arch and Debian (fglrx vs. Ati open source) is 10 C degrees. Debian Ati open source is much hotter. And ofc I am facing the low battery life too, because of this. My laptop is using much higher energy consumption with open source driver (almost double). How can I check my energy consumption on Debian? I read about some xorg options. I tried it, but no effect. As I am on Debian testing I am using kernel 2.6.32. Does this kernel supports xorg video energy consumption options?
I am using qmailserver. I login through webmail but today I installed openwebmail instead of webmail. Its ok, but I cannot login my existing users. It login only new users which I created. and email id come with fully qualified name like saran@www.example.com, so I need saran@example.com. How I do this?
View 1 Replies View RelatedI'm wondering if any Open Sourced OS and services/applications installed in an valid business organization, is there anything I should be worrying about in terms of using open source os/applications for business?
Reason being is in case auditing comes, does our open source items get audited?
I have Ubuntu, Fedora, CentOS running in my internal network running multiple services/applications and being used for business (LAMP stack, SVN, BIND, etc...).
I have a problem about to open zebra service after install quagga by command(./configure ; make ; make install ) and add service port ("/etc/services")
#service zebra status
zebra dead but subsys locked
and can't telnet to zebra
"telnet: unable to connection to remote host: connection refused"
I following a manual http://www.quagga.net/docs/docs-info.php but it's not perfect.