I just installed starcraft 2 using playonlinux and wine. I was able to launch it once it finished the updates. I proceeded to amp up the graphics to ultra on everything. I did that then it crashed. i now can not seem to open it. Not through wine or on the desktop.
View 1 RepliesI just switched over to Ubuntu from vista because it was giving me to many problems and I'm setting things up. My question is how can I bind Quamachi's ip to Starcraft like in windows but since forcebindip wont work I am wondering if any of you know what I can do to get it so I can play lan udp games over quamachi? I have quamachi installed and ready to go... I can see the networks, so once I can get starcraft set up I should be ready to go. I just need to bind the ip somehow.
View 9 Replies View Relatedi have Starcraft 2 with wine, now when i first tried to play it, i upped the graphics, then it crashed. Now when i try to open it, it just crashes instantly - any words of advice on how i can get my starcraft 2 running?
I got a phenom II x4 3.2ghz
gigabyte gtx 460 1gb
and 2 gigs of ddr3 ram
I'm trying to slowly wean away from windows (too many BSODs) and convert to Linux. only one problem. I'm a hardcore gamer. i went on google and looked up how to run windows games in ubuntu. all i could really find was "use winetools". i know that winetools emulates windows, but it's really complicated to figure out how to use it. can someone tell me how to use winetools to play starcraft 2? or what packages i may need to download? (Sorry if this is kind of a vague post, but i really don't know how to use winetools at all.)
View 1 Replies View RelatedI have wine installed. And i also have Starcraft. however it is the No Install type. It opens fine with wine. However the mouse is really laggy in the menu and in gameplay. The screen tears during gameplay as well. Does anyone know how to fix these issues. I have wine installed on a different computer, running linux mint distro. And the starcraft works fine on there. So i dont understand why it would work find on mint and not on ubuntu.
View 2 Replies View RelatedMy laptop was not hibernating using default kernle and uswsusp.So I decided to try tuxonice from ubuntu ppa. Now hibernation and suspend is working beautifully on my laptop. But I have few doubts in my mind, since now I am using patched kernel from ppa will it affect the overall stability of system ? What if there is any kernel related update from ubuntu will I receive that update ? What if new ubuntu version is release, can I upgrade without breaking my whole system ?
View 2 Replies View Relatedsetup amd64bit created a live DVD of the 11.4 64 bit burn pope inside went to install put selected the second option because putting it on a 60G vertex ocz super fast drive. used the entire drive for ubuntu. have mirror dual monitor installed the proprietary drivers from amd.go to Ubuntu software center type additional drives install and install the proprietary drivers from ati you should be able to figure that out then lauch the ati catalyst control and setup your 1 and 2 monitors so that they are correct.
ok now install Wine ubuntu software thingy tip wine don't do the beta right now im stuck on installing starcraft and mounting the other hard drives will get back to you and make a better guide on this.oh by the way if your Internet isn't connecting automatically you might need to set your IPV4 setting manually this is because you have set your router with DHCP disabled. Code needed for install:
nautilus $HOME
PLAY ON LINUX is working for SC2 Sois crashes though and during install sont font was missing neede to guesse correct button to install.
More useful code
To mount the drive ro (read only):Make a mount point.mount First open a terminal.Then type these commands (assuming the partition is /dev/hdb1):
Code:
sudo mkdir /mnt/music
sudo mount /dev/hdb1 /mnt/music -t ntfs
Note: if the partition is not /dev/hdb1 you will need to adjuxt accordingly.To make the mount automatic at boot you need to edit fstab:
Code:
sudo gedit /etc/fstab
Add this line:
Quote:
/dev/hdb1 /mnt/music ntfs auto,users,ro 0 0
Again, adjust your partition accordingly if needed. Copy and paste the contents of /etc/fstab (in your next post) and type in a terminal "sudo fdisk -l" (w/o quotes) and copy and paste the output.
[code]....
if I have a kernel that does not automatically update because I installed it from a deb, will I be missing out on important security updates or the like? I installed the 2.6.34 kernel because I wanted trim support, but am very concerned that I will miss something important.
View 1 Replies View RelatedI grabbed a pacthed version of tomboy from this in order to use tomboy Task manager addin created by the same developers I guess. Well I managed with the
Code:
./autogen.sh
and
Code:
./configure
scripts until I came up with a valid make file. I later ran
Code:
[Code]...
I have scoured the web for every bit of information I can find regarding installing the ieee80211 patched driver for the realtek rtl8187, to use an Alfa AWUS036H for packet injection. Error after error after error, I have had no success, and all I can find is other people with the same setup having the same problems.
Assume I have installed Ubuntu 10.10 straight out the box, so no updates have yet been made. Is someone in the know willing to post some step by steps on how to download, install and patch the necessary driver and install necessary software, including precise info on how to blacklist or remove mac80211 version rtl8187.ko in order to replace it with the patched ieee80211 version?
I know there's a tutorial on here somewhere for installing rtl8187 in an older version of Ubuntu, and in that thread, the people with Ubuntu 10.10 all seem to be having the same problems.
I've been trying to update my base RHEL 5.4 to a 5.4 + Security fixes. Is this possible or am I left to only upgrade from 5.4 up to the latest RHEL version?
Like, is there a way to update the packages in 5.4 (sshd, kernel, librairies...)but without upgrading to a different release?
This may sound odd, but how does one report a patched file to a major dev team, like PHP? Sure, they have their bug report page, but the following bug hasn't even been reported. After a bit of googling, though, I found the solution.
As I learned from first hand experience, compiling php5-5.3.6, when ./configure --with-openssl, terminates like so code...
if one has openssl-1.0.0d installed. Apparently, OpenSSL dropped support for SSLv2 with said version, and php5-5.3.6 doesn't know what to do without it enabled.
Fortunately, the boys @ Debian figured it out & have patched xp_ssl.c previous to their latest php5-5.3.6-10.deb release, but how do you let the PHP devs know?
I currently have Red Hat 5.4 installed and subscribed to red hat network for alert updates.The updates will be done by our administrator but I will like to check if the admin has done so on a weekly basis. Is there a command that generates a report or allows me to check if certain updates has been patched? I understand running a yum update will list all applicable patches. Should we just simply update all or only certain applications applicable to our organization environment?
View 2 Replies View RelatedI have been trying to compile a patched driver for use with my RTL8187L wireless device and get this error.
rm -f ieee80211/Module.symvers 2>/dev/null
rm -f ieee80211/Modules.symvers 2>/dev/null
make -C ieee80211 all
[code].....
I'm trying to run Starcraft 2 from the installation folder I kept from my previous windows install, and when I double-click the .exe I get an error that says it doesn't have permission to run as an executable. So I checked out the properties page, permissions tab, and for some ungodly reason none of the changes I make stick. The second I click the check box for "Run as an exectuable" it unchecks. I have no idea what to do and I've scoured the net looking for an answer. I'd prefer to avoid redownloading it (didn't buy the retail version) but it's looking like my only option at this point.
View 1 Replies View RelatedI downloaded the Stats program R through the Terminal, but don't know how to open it.
View 6 Replies View Relatedi have installed namebench 1.1 using terminal. its saved to my directories yet i still cant open it.
View 1 Replies View RelatedIm running ubuntu 10.10 and i installed gdesklets and when i try to open it.it never starts im kinda new at all this so im not to sure what is going on.i have a hp pavilion dv7 laptop.
View 4 Replies View RelatedI installed tintin++ mud client, it installed successfully, but I can only open in the terminal, how do I find where it installed to, and make a desktop icon for it?
View 1 Replies View Relatedroot__________:/home/---# docky
[Info 15:10:25.304] Docky version: 2.2.0 bzr docky r1807 ppa
[Info 15:10:25.315] Kernel version: 2.6.35.28
[code]....
I installed Open SSH and don't know how to launch it from the terminal.
View 7 Replies View RelatedI installed office 2007 in wine but i can not open it,Is installed i can see it in wine
View 4 Replies View RelatedI installed Swiftfox, but it won't open. It has an icon, and it bounces then disappears. what else is needed to make it run?
View 9 Replies View RelatedI've installed 11.4 on the laptop. So far there hasn't been a huge leap of difference between the 11.3 and 11.4. But now I can't use Skype. It's installed and all of that. But whenever I open it, nothing happens.
View 6 Replies View RelatedI am a complete newcomer to Ubuntu (or Linux in general for that matter) although I have many years' experience of Windows. It seems to me that the Base application of the open office suite of programs has not been installed by default. Why is this? And how do I install it in Ubuntu 9.1?
View 3 Replies View RelatedI installed it using the ppa instructions here [URL] The terminal says this when I try to run the program:
tshipp@Harold:~$ openshot
--------------------------------
OpenShot (version 1.1.2)
--------------------------------
*** ERROR: MLT Python bindings failed to import ***
[code]....
I need to change the location and language of open office on my server. (Hardy)
Not sure why it wasn't installed on apt-get, but it wasn't.
I'd like to completely remove and start again fresh (this time with apt-get) How can I do it?
I've been spending the hours beating my face against the wall and going near insane trying to get arial fonts installed on fedora, so that they can be used in open office.
How might these be installed ?
yum -y install msttcore*
Loaded plugins: refresh-packagekit
Setting up Install Process
No package msttcore* available.
I have a problem related with certificate generation. I had successfully installed openssl. After that I do these.
[root@localhost openssl-1.0.0a]# cd /usr/local/ssl/misc
[root@localhost misc]# ./CA.sh -newca
CA certificate filename (or enter to create)
Making CA certificate ...
Generating a 1024 bit RSA private key
.........++++++
..........++++++
writing new private key to './demoCA/private/./cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank. For some fields there will be a default value,
If you enter '.', the field will be left blank.
Country Name (2 letter code) [GB]:IN
State or Province Name (full name) [Berkshire]:KERALA
Locality Name (eg, city) [Newbury]:KOCHI
Organization Name (eg, company) [My Company Ltd]:squad
Organizational Unit Name (eg, section) []:SUPPORT
Common Name (eg, your name or your server's hostname) []:localhost
Email Address []:jk.r@squadinfotech.com
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:mahhghh
An optional company name []:mca
Using configuration from /etc/pki/tls/openssl.cnf
Enter pass phrase for ./demoCA/private/./cakey.pem:
I am unable to access the ../../CA/newcerts directory
../../CA/newcerts: No such file or directory
Distro:Centos 5.3 kernel 2.6.18
When trying from the link which was in the applications menu, and manually from terminal I receive the following errors:
Code:
I have since tried the HOWTO: Install Azureus (newest, non-repo way) method of installing Vuze/Azureus, which I think is what I set up for 9.04, and also a synaptic complete removal and reinstall which didn't work.
I have an .azureus folder in my home dir which I would like to keep because it contains my settings and half downloaded torrents etc.
I would be happy to use the the synaptic packaged version of Vuze because it is much more up to date than it has been in the past.