Ubuntu :: Install Turbo Prolog Complier In 10.10 ?
Dec 27, 2010I want to install turbo prolog complier in ubuntu 10.10.
View 2 Replies
ADVERTISEMENT
Software :: How To Install Tsam ( Turbo Assembler )
Mar 4, 2010presently am doing an LTSP project i have sucessfully insatlled DosBox and Oracle in fedora9 now i wanted to install tsam ( Turbo Assembler )
View 1 Replies View RelatedUbuntu :: Get A Complier Working For JEdit?
Nov 6, 2010I need to know how to get a complier working for jEdit. To run Java code.I usually use windows to run and compile Java, (although installing compliers is very troublesome for me.) I usually use textpad on windows. However on this laptop I am using I can't get the complier commands to install on the XP version, anyway that's a different matter.What I am trying to do here is get a complier working for Java on jEdit, (using an Ubuntu 10.10 netbook)now it may already be installed with the software, I have looked but cannot find it. (why there aren't installed with the software I don't really understand. I don't have jdk installed as there is a few different version, so I wasn't sure which to go for.
View 2 Replies View RelatedSoftware :: -fPIC Error While Compiling Swi Prolog On RHEL 5.4 64bit
May 31, 2011installing swi-prolog on RHEL 5.4 64bit. during the make it returns the error
[code]...
From what I understand -fPIC is something that is only a concern on 64bit operating systems. I tried this on RHEL 5.4 32bit and it worked fine. How do I get past this error? I've tried disabling SElinux as recommended on the swi-prolog website, but that had no effect. I also tried compiling with "CFLAGS=-fPIC" but still the same issue. This happens on all my RHEL 5.4 64bit machines.
Ubuntu :: How To Run Turbo C
Jan 25, 2011i am running some programmes on gcc compiler and i have to check same programmes on turbo c compiler. But i do not have this c turbo compiler.i have done some searching and found that it is not possible to install turbo c directly ,for this i have to use dosbox.ok now the main question is that for this i must have c++ setup which i do not have.
View 6 Replies View RelatedUbuntu :: Alternative To Turbo Tax?
Feb 4, 2010I have used TurboTax online for several years to do my return....this year they are refusing Firefox running on a Linux OS!Anyone know of an alternative that is Linux friendly?
View 9 Replies View RelatedUbuntu Servers :: AMD Turbo Core Not Working On 10.10?
Mar 18, 2011I have installed Ubuntu server 10.10 on my new computer which uses AMD Phenom II X6 1090T. But I have noticed that my CPU cores were not able to run at 3.6GHz at any time, even when I only have one CPU-intensive computing job. They are either at 3.2 GHz or 800 MHz, like this
Code:
$ cat /proc/cpuinfo | grep -i "cpu Mhz"
cpu MHz: 800.000
cpu MHz: 3200.000
cpu MHz: 3200.000
[code]....
My maximum CPU frequency seems to be locked at 3.2 Ghz:
Code:
$ dmesg | grep "pstate 0"
[ 1.595918] powernow-k8: 0 : pstate 0 (3200 MHz)
I goggled around and it seems that Linux 2.8.35 kernel have solved the problem. I just do not understand why it does not work on mine.
Code:
$ uname -a
Linux hogwarts 2.6.35-22-server #35-Ubuntu SMP Sat Oct 16 22:02:33 UTC 2010 x86_64 GNU/Linux
Hardware :: Enabling Turbo Core ?
Oct 28, 2010I have Phenom II X6 1055T. If Turbo Core kicks in, the speed should go up to 3.2GHz.
Problem is, it never kicks in. My kernel enabled Turbo Core already.
dmesg :
I am guessing, TurboCore depends with the P-State reading and cpu frequency thingy. As you can see, P0 are not 3200MHz (if my hypothesis are correct). Or perhaps i am wrong. I tested by not doing nothing and running folding program on one core with conky monitoring. Conky reads 5 cores at 800MHz, and one core at 2.8GHz.
TurboCore is enable on windows xp. I can see the core sometimes goes up to 3.2Ghz occasionally.
General :: How To Know If Turbo Mode Is Enabled
Feb 13, 2010I have a server hosted elsewhere and I am wondering if there is a way to know if my Server has turbo mode enabled or not?
I have i5 @ 750 Intel. It support Turbo mode but am not sure if my server has got it enabled or not.
General :: Difference In C Programming In Gedit & Turbo C?
Sep 6, 2010In our college all the systems (running on windows xp) have TURBO C/C++ installed on them which we use for C programming. I recently installed ubuntu 10.04 on me laptop (DELL Inspiron 14R (N4010) with some modifications) i read somewhere on the internet that Gedit can be used for writing a programme in ubuntu which can be compiled using gcc. Well if i use Gedit rather than Turbo c will i experience any differnce?, i mean is there any problem in doing so?? Or i should prefer running turbo c using DOS BOX?
View 7 Replies View RelatedGeneral :: Set Up Wire To Accommodate Turbo Tax And Itunes
Mar 22, 2011how do I set up wire to accommodate turbo tax and i tunes?
View 2 Replies View RelatedProgramming :: Using Wherey() Of Turbo C Function In Gcc Compiler?
Apr 26, 2010is there any way of using wherey() of turbo c function in gcc compiler like we have for gotoxy(), clrscr() functions.....
View 2 Replies View RelatedUbuntu Networking :: Telstra Mobile Broadband - Turbo Stick Not Working
Apr 7, 2011I have an acer 532h aspire one, running ubuntu 10.04.
Basically, I bought a Telstra Turbo USB broadband stick and I've been having a bit of hell getting it to work. First I couldn't get the computer to recognize it had been plugged in at all. I downloaded the modeswitch packages to no avail. I tried a few other terminal tweaks but they didn't change anything either. I left the card in and restarted the netbook and it finally recognized the wireless card. I was able to surf the internet for an hour or so a couple times. But after stowing the computer away for a couple hours and turning it on again, I found that this work around was no longer effective. So now I'm back to the blue light never blinking and I have to tether my phone and pay ridiculous data charges because I'm in the middle of nowhere.
I'm really new at troubleshooting things that don't work right out of the box.
It's a telstra turbo prepaid wireless broadband. The stick isn't even recognized as removable media.
lsusb returns this:
Also this might be relevant:
Debian Hardware :: Disabling Intel Turbo Boost On All 4 CPU
Jul 21, 2015Due to some reason every-time I boot the laptop the power governors reset themselves to "ondemand". Which causes my laptop to overheat until it shut-downs. I tried adding this line to grub Code: Select allGRUB_CMDLINE_LINUX_DEFAULT="intel_pstate=disable" which kinda worked, but only on cpu 0.
Code: Select allcpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: acpi-cpufreq
[code]....
Software :: Not Recognising New Telstra Turbo Wireless Modem
Feb 13, 2010I've clean installed over a friend's win98 with Mint 7 (disc from lab a year? or so ago).
My Optus modem prompted the wizard and now always works fine,ok speed, and I updated Mint with 300 new files etc.
But my friend's new Telstra Turbo modem,[Sierra brand] although it shows a blue light flashing, doesn't get the wizard connection process started, and there's just NO sign on Mint that it's plugged in.
If I can get it to work, it will increase the number of people I know who use linux to 1.
Debian Configuration :: Intel Turbo Mode Not Kicking In On Nehalem Xeon?
Mar 9, 2010I've got a dual Xeon 5570 (Nehalem) server. It clocks down properly, but never, under any circumstances that I've found, clocks up past its TSC. Even when running basically nothing but cat /dev/zero > /dev/null, nothing gets clocked higher than the TSC. Below is the turbostat output, which clearly knows what the hardware is actually capable of, but it never actually achieves it. I'm running Lenny, with backported kernel 2.6.30-bpo.2-amd64. I tried the 2.6.32 backport and there wasn't any difference. know where I should look next? BIOS settings? Do I need to change some kernel option and recompile?
# ./turbostat
Nehalem multiplier 22, TSC frequency 2933 MHz
Nehalem 4 cores active: 24 mult, max turbo frequency = 3200 MHz
Nehalem 3 cores active: 24 mult, max turbo frequency = 3200 MHz
Nehalem 2 cores active: 25 mult, max turbo frequency = 3333 MHz
Nehalem 1 core active: 25 mult, max turbo frequency = 3333 MHz
[Code]...
CentOS 5 Hardware :: 5.4 - No Speed Step / Turbo With Intel Xeon X5550 (Nehalem)
Dec 15, 2009I just installed a new HP DL360 with 32 GB of RAM and a Intel Xeon X5550 which supports speed stepping and turbo mode. I've enabled turbo in the BIOS, but cannot seem to get CentOS 5.4 to make use of either of these features. I've been googling for a solution for a while now, and tried various things, such as installing cpufreq. However, when I type cpufreq-info, I get this:
# cpufreq-info
cpufrequtils 005: cpufreq-info (C) Dominik Brodowski 2004-2006
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
[code]...
Ubuntu :: Earn C And C++ In Windows Using "turbo C"?
Jan 19, 2010Im a BCA 1 year student and just move from windows to ubuntu?we learn c and c++ in windows using "turbo c"but as im newbie to ubuntu i dont know what to do??
View 4 Replies View RelatedOpenSUSE Install :: Can`t Install Suse 11.3 - Every Time System Shut Down In Install Process
Jan 30, 2011I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
OpenSUSE Install :: Install Gnome After The Minimal Server ( Console Based ) Install?
Feb 2, 2011Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedOpenSUSE Install :: Convert Factory Install Into Point Release Install Later
Jun 14, 2010If I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedOpenSUSE Install :: Did Install Vsftpd, But Removed It And Install Pure-ftpd Instead?
Jul 18, 2010In /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.
OpenSUSE Install :: Install Suse Alongside An Existing Install?
Apr 18, 2010i have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
Ubuntu Installation :: Possible To Create An ISO Install File/CD From Snapshot Of Current Working Install?
Sep 25, 2010I have an apparently stable installation of Xubuntu that I've hand-tweaked in a few ways. I'd like to be able to reinstall this system verbatim on this machine should a disk crash happen, etc.Is there a "standard" method to create an install and/or total-backup CD that would be an instantiation of the currently-installed-and-modified system?
View 1 Replies View RelatedUbuntu Installation :: Server Install On Laptop Doesn't Install Pcmcia Support?
Jan 12, 2011I am installing Ubuntu Server 10.10 on and old Dell Laptop. The network connection is an Xircom PCMCIA card.During install, the computer sees and interacts via the network just fine. For example, I can ping the gateway. Also, the command "lspcmcia" works and show the Xircom card.When I reboot, however, there is no network access, and the "lspcmcia" command is not there. When I try "lspcmcia" the OS helpfully tells me that I can "apt-get" pcmciautils, but, without network access, that fails.I tried adding the install cdrom to apt using "apt-cdrom" and then tried to "apt-get" pcmciautils and it got further, installing some dependencies, but acted like it still was unable to locate the pcmciautils package.
View 1 Replies View RelatedUbuntu Installation :: Install On Hp Pavillion - Hangs On Initial Install Screen Forever
Aug 11, 2011Trying to install Ubuntu (tried several releases) on HP Pavillion Pentium 4 Proccessor 515 2.93 Gig 1M L2 cache 533mhz 90nm . Have 1 gig ram and 1Tb hd. Hangs on initial install screen for ever. Tried versions from 8.10 (origional disk) to 11.01. Machine works perfectly on Windows XP but who wants that? The model is pavillion 1000 system number pl397aa.
View 7 Replies View RelatedUbuntu Installation :: CD Install - Starts To Install Asks About The Partition Then The Keyboard
Nov 17, 2010I downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
View 3 Replies View RelatedUbuntu Installation :: Install Step Fails: Select And Install Software?
Jan 7, 2011I'm an OpenSuse user wanting to try something different.Ubuntu Studios caught my attention. I had a brief play with an older version a while ago and liked whatI saw.Im having problems installing though.I've downloaded the 32bit version from the studio website link, and burnt the DVD.However the install always fails at the same stage: Select and install software.The error message is not specific, and no more information is given other than the step has failed.Any ideas what could be causing this? Ive tried to burn the DVD several times, on 2 different machines, but no luck so far.
View 8 Replies View RelatedUbuntu :: Install Drivers To Install / Boot After Installation From Raid Drives
Mar 1, 2011Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies View RelatedUbuntu :: Install GIMP Via Terminal - SPM Or USC - Error - Not Being Able To Install Libpoppler-glib4
Sep 1, 2011I am on 10.10 using Gnome 2. When I go to install GIMP via Terminal, SPM or USC I get an error about not being able to install libpoppler-glib4. Odd thing is I have the updated version.
View 6 Replies View Related