Ubuntu :: Install - Basic - Onto 2 Floppy Disks ?

Apr 25, 2011

This is what I am trying to get for my dinosaur, Compaq Presario 5050. But I have never booted linux through floppy disks before, so I haven't a clue what I am doing.

In the read me from the site I linked above, it said they need to be 1.44 M and DOS formatted. Both are 144, and I went to my computer (in XP) and right clicked on the floppy, format, and create bootable DOS disk. But this fills the disk up with files, and even when I deleted them all, it said there was not enough room for one of the two files I am supposed to copy on to it.

So, how do I make the file fit onto the floppy, and how do I write the image file to one of the floppies? In DOS? I can use linux too, if necessary. (if it's easier)

This is another one I am looking at, but basic linux looks easier to install.

View 9 Replies


ADVERTISEMENT

Ubuntu :: Read Old Floppy Disks On Computer Running Lucid 64 Bit?

Oct 8, 2010

Is there anyway of reading old floppy disks on a computer running ubuntu lucid 64 bit?

View 5 Replies View Related

Fedora :: F12 & Internal Floppy Drive - Floppy Formatting No Longer Works?

Dec 13, 2009

Is there something weird about the FLOPPY DRIVE on F12? Nothing associated with it works & I can't get an icon for it. Also the FLOPPY FORMATTER no longer works. (mine is an internal drive)- I had some really miner quirks with it in 10 but it worked. I had some workaround launchers that I used until an upgrade semi-fixed it. (It would give a false error that it couldn't run but did. I just ignored it.)

I tried to edit FSTAB to cure a problem of my BACKUP drive showing up twice*** so while I was in there I added the stuff for the floppy & it still doesn't work. If I try to mount it manually, I get the error that /dev/fd0 doesn't exist.I tried to find some info on it & it SEEMS that there MAY be a bug but I'm not sure as the info is a bit confusing as to just what version & such they are talking about. And there was also the problem that all the stuff seemed to be OLD or not related to my problem.I why I quite hacking at my system, is that all my workaround launchers & the formatter say that there are GNOME things missing & they can't run. So I figure that there is something missing or screwy already & that I'd better ask BEFORE I make things worse or actually break something.With the fact that floppies are about gone, it's getting to be not that big of a deal but I still find myself having to use them for repair purposes (albeit, not as much) & it gets to be a bit of a pain to fire up M$ just to do something like this.

*** It appears that the one in FSTAB was the one I needed, so where would the OTHER one be so I can get rid of it? Or at least make it auto mount.

View 12 Replies View Related

Hardware :: Write A Floppy Boot Image To Floppy Drive (as Root)?

Feb 19, 2010

I am trying to write a floppy boot image to my floppy drive (as root):

Code:
dd if=boot.img of=/dev/fd0
dd: opening `/dev/fd0': Read-only file system

[code]....

View 8 Replies View Related

General :: Cannot Mount Floppy Drive While Creating Driver Floppy

Sep 23, 2009

I am having a Promise TX4650 RAID controller & trying to create a driver floppy for installing the drivers. Also am using RHEL 5, I can create the driver floppy, but when I type "mount /dev/fd0 /media/floppy" I get error: "mount: mount point /media/floppy does not exist".Can I get the files in a format other than the ext2 floppy image, so that we do not need to use a floppy drive?There is a readme file inside the driver archive & you can use that as a reference.

View 2 Replies View Related

Hardware :: Cant Open A Floppy Disk On Floppy Drive

Jun 7, 2009

error message:Unable to scan Floppy Drive for media changes Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

View 1 Replies View Related

OpenSUSE Install :: Install With Just One Floppy And A Good Network Connection?

Jun 10, 2011

I wanted to avoid having to use my CDs, DVDs weren't an option, and I didn't have very large usb sticks. It seemed my only option for installing openSUSE onto my laptop was with some sort of network install/boot.

I ended up finding this really cool service, netboot.me. What you can do is download a very small image (<1MB) for a floppy, USB stick, or CD, and then boot off of it. Then you can either install pre-defined distros over the network (straight from the distro's servers), or you can make an account (by connecting your google account), and then make your own configuration. I managed to make a configuration for openSUSE 11.4, and I was able to completely install it, via only using one floppy disk and the internet!

My first step in the process was to download the floppy image. Since I was on a windows computer, I then downloaded rawwrite for windows, and I wrote the image straight to the floppy. After that, I restarted the computer and booted from the floppy. It loaded the image, then asked me to press a key or wait for 3 seconds. In order to boot from my configuration, this was the point where I had to press a key, and then choose the option of loading the custom configuration. The configuration I made has an ID of 434001 (which anyone is free to use). Unfortunately, according to their community, the gPXE "network stack" isn't very optimizied, so the initial two downloads took awhile (my speed was locked at 65 kB/s.)

It then began booting in the installation environment, which took about 15 minutes, although download speeds were now back at normal, faster speeds. I configured my installation, and let the package downloading begin!

View 9 Replies View Related

Ubuntu Installation :: Can't Install Grub To Floppy

Jan 5, 2010

Unfortunately I have to use Win NT 4.0 everyday and in fact I am trying to create a system where I have many versions of NT on one disk. My plan is to store them in Linux and create a shell script to over write the first primarly partition which is ntfs. I am trying to install Xubuntu Koala on a logical partition and NT at the start of the disk. Grub is not loading NT well. I want to just use the NT booter and launch Linux from a floppy.

During the install there is an option to write grub to /dev/fd0 but it won't work for me. I tried both fat and ext2 formatted disks and I made sure they were present during the initial boot for auto mounting. I have verified that the floppy drive actually works.

How to install grub to my floppy.

View 2 Replies View Related

Ubuntu Installation :: Trying To Install UNR With No CD / Floppy Boot Only

Mar 17, 2010

I'm trying to install Ubuntu Netbook Remix 9.10 on a Compaq Evo N200. The problem is that it doesn't have a CD drive on board, and it only supports booting from USB floppy drives- not USB flash or CD drives. I have access to a flash drive, floppy drive and CD drive, all USB externals. I've tried a couple different floppy boot loaders with little success. I understand that it also supports network boot, so this might be an option. What is the easiest way to get UNR running on this laptop?

View 4 Replies View Related

Ubuntu :: How To Install Microsoft Visual Basic

Jan 18, 2010

How do I install microsoft visual basic on ubuntu....(using wine etc)

View 4 Replies View Related

Ubuntu :: 11.04 - Basic Downloaded Software Install

May 16, 2011

I am currently trying to install Personal Brain on my Ubuntu 11.04 and I came to realise I am Linux retarded. I got used to it for about a year, but for the most part I used the Ubuntu Software Center and Synaptic Package Manager to install software and learned to manage okay. Thing is, I have used the terminal, but I don't know any of the coding or commands to generally install software being straight up downloaded form the net.

View 2 Replies View Related

General :: How To Install Basic Applications In Ubuntu

Jul 4, 2010

I am planning to download/install latest Ubuntu Desktop version this week. How to install additional Applications in Ubuntu in case I will need some. BTW, the old HDD I will be using is pre-installed with Debian so I need to do a "Fresh_install". I know how to use RPM in RedHat but I think in Ubuntu its a different thing. Is there any particular website to download these additional Apps?

View 3 Replies View Related

OpenSUSE Install :: How To Install Without Cd - Usb Boot - Floppy - Other OS

Nov 28, 2009

I want to move to this system after bad experiences with windows. I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life.

The cdrom is gone, the bios doesn't have usb boot support, there is no floppy or pxe network boot ability, so I was wondering what other way I can have to install linux on a barebone hd (nothing on it).

The only Idea I had was to copy some files on the hd via a ide cable adapter, connecting the laptop hd to the mobo of a desktop. I did the same in the past to install xp: I used msdos 7 to boot the machine and then launch the xp setup from withing the hd (copied before the installation files).

So my question is, can I do the same with linux? in such case, of course I will have a hd formatted with fat32 to boot in msdos, and what files should I copy on this partition to launch the installation?

View 9 Replies View Related

Ubuntu Installation :: Which Disks Can Be Main Boot Disks

Mar 31, 2010

I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)

Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?

View 2 Replies View Related

Ubuntu :: Install Windows 7 Basic Recovery When Installed As The Os?

Jan 2, 2010

how to install windows 7 basic recovery when ubuntu is installed as the os

View 1 Replies View Related

Ubuntu :: Install Basic Pages Like Php Admin With Commands?

Aug 6, 2010

Recently got a VPS and installed Ubuntu Server 9 (32bit) When i go to install basic pages like php my admin with commands like..sudo apt-get install phpmyadmin I get a error like this:

root@PkNGssbkpT:/# sudo apt-get install phpmyadmin Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run `apt-get -f install' to correct these:
The following packages have unmet dependencies:

[Code]...

View 1 Replies View Related

Fedora Installation :: Install 13 From DOS Without USB,CD,Network, Or Floppy?

Sep 5, 2010

how to install Fedora 13 on my IBM X40 laptop which does not have a CD, a Floppy, a Network or a working USB. The only way I can write data on its hard disk is by removing it and connecting it via a USB rack to another laptop which runs Windows 7 64bit.

View 3 Replies View Related

Debian :: Unable To Install Proftpd-basic?

Sep 7, 2011

I am unable to install proftpd-basic:

The following NEW packages will be installed:

proftpd-basic{a}
The following partially installed packages will be configured:
proftpd proftpd-mod-ldap proftpd-mod-mysql proftpd-mod-pgsql
0 packages upgraded, 1 newly installed, 0 to remove and 13 not upgraded.

[Code].....

View 1 Replies View Related

OpenSUSE Install :: Cannot Mount CD Floppy Or USB Flash Disk

Jul 22, 2010

The system is 11.1 32 bit and used to work ok

All the drives function and mount normally under Parted Magic.

Sometimes a cd will mount after 15 mins or so but if it is ejected it will not remount. after that event the dmesg output is 3 times as long. As it is 35K chrs long it is too long to post!

I have changed hardware and cables with no effect.

I have run the repair option on the install disk. I get a cannot find floppy error

It also reports cups, hal, ntp & postfix as errors but if I select repair it still returns the same next time I run the repair routine.

It also says the bootloader is faulty if I select repair I go into an infinite loop so I exit with skip. Anyway the system boots ok and runs just fine apart from the cd/fdd/usb problem

View 3 Replies View Related

General :: Boot Debian Install Disk From Floppy?

May 4, 2010

I scored a Dell poweredge 6300 from a local pawn shop. It has the capability to boot from cd-rom, but apparently not with isolinux, which is what the debian installer cd uses. I was able to boot to UBCD411 (Ultimate Boot CD, which uses syslinux), but didn't see any option to boot to a CD (maybe I'm missing something here?). I tried using the boot floppy from this site. I didn't expect it to work (it's from the Woody era), and it did not. I got a message that says SYSLINUX ver.XXXX CBIOS boot failed. I went to [URL].. and looked for a boot floppy image for Lenny, but apparently it doesn't exist. I did however find the boot floppy image for Etch.

To be honest, even if I did find the Lenny floppy boot image, I'm not sure how to use it to point the system to the installer CD. So, I have two questions:

1) Does anyone know of a boot floppy image for Lenny, or if I could use the Etch boot floppy image?

2) How would one boot from floppy, then point the system to the installer CD?

System info:
(4) Xeon Pentium 2 processors 500 Mhz
(6) UltraSCSI hard drives
(1) SCSI cd-rom drive
(1) SCSI dvd-rom drive
(1) Floppy drive
(1) 10/100 NIC

I'm open to any other suggestions as to how I could install Debian Lenny on this machine.

View 5 Replies View Related

Debian Hardware :: Servers Which Contain SATA Disks And SAS Disks?

Feb 25, 2010

I have servers which contain SATA disks and SAS disks. I was testing the speed of writing on these servers and I recognized that SAS 10.000 disks much more slowly than the SATA 7200. What do you think about this slowness? What are the reasons of this slowness?

I am giving the below rates (values) which I took from my test (from my comparisons between SAS 10.000 and SATA 7200);

dd if=/dev/zero of=bigfile.txt bs=1024 count=1000000 when this comment was run in SAS disk server, I took this output(10.000 rpm)

(a new server,2 CPU 8 core and 8 gb ram)

1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 12.9662 s, 79.0 MB/s (I have not used this server yet) (hw raid1)

[Code].....

View 3 Replies View Related

OpenSUSE Install :: Hangs At 'loading Basic Drivers'?

Dec 21, 2010

I got a new ASUS EeePC 1015PEM with Windows 7 with the intention to install OpenSuse 11.3 onto it for having a dual booting netbook with enough disk space.I'm installing from an external DVD drive, the checksums of the ISO were ok as well.However, the OpenSuse installer fails at starting up after selecting the action. It hangs, no matter what menu entry I chose, at "loading basic drivers", forever.Because this isn't necessarily an unknown problem I've tried some of the predefined kernel options of the main installer menu. Then I tried some manually entered kernel boot options that helped me in some other installations:

acpi=off, apm=off, CPUFreq=noNone of them seem to have an effect on the installers behaviorI hope that there is people who managed to solve this problem with an actual EeePC model... because I really don't know what I could any more. It's kind of frustrating to not even get past the kernel launch I haven't tried any other distros installation discs, but I don't even intend to. I want OpenSuse because I'm running it on our firms machines as well and don't like shifting between systems.

View 9 Replies View Related

CentOS 5 :: Tablet PC - New Install From DOS Floppy - Kernel Panic Hang

Apr 15, 2009

I recently bought a Toshiba Portege M200 tablet PC and it's caused me no end of grief to load linux on it. I would like to load CentOS 5.x (because my hosting company uses it and I will be able to learn as I run it).

Here are my resources:

I found internet resources to create a boot disk that enables me to see my 8GB Sony USB flash drive via DOS. It works nicely.

I have a laptop drive to USB converter and can access the hard drive directly from my Win XP desktop. I have PowerQuest's Partition Magic Pro (v8.0) and can make Ext2 and Ext3 partitions at will. I have also loaded a program that allows Windows XP to read and write from Ext2 and Ext3. It works well.

I have tried loading boot images from PXE. This option is mostly out because it seems to be a couple levels past my competency (I haven't been able to get it to work).

Given those resources, what's the best way to load either the CentOS live CD... or some other approach?

Since I wrote this, I figured out how to make a boot floppy that can start an external USB CD-ROM/DVD drive. Here are the files on the floppy:

Here's the contents of my config.sys:

Here's the contents of my autoexec.com:

I can boot to the CD and launch linld.com. The problem is that I keep getting a kernal panic message, saying that a memory block could not be addressed. And when I add the following part to the line above: "initrd=d:isolinuxinitrd.img" the install fails and reboots. I have tried to expand the initrd.img and it appears... blank?

View 13 Replies View Related

Slackware :: Install Latest Lilo In Small Distro And Fit A 1.44 Mb Floppy Disk

May 22, 2010

I need a small distro... that i can fit into a 1.44 Mb floppy disk... so i can install latest lilo.

View 6 Replies View Related

Installation :: Live Disks Won't Install Drivers Or Install?

Feb 19, 2009

So far I've tried gOS, Linux Mint, Ubuntu, and SuZE. The result is the same: The live disk runs, opens up but the graphics are shoddy, sound doesn't work, everything is very slow, and in attempting to partition and install the os, it stays at "Resizing partitions 0%"I know Live disks are going to be a bit slower, but this is super slow and this computer is just a few months old. Usually the live cds have a database of drivers for common media but it just isn't accelerating the graphics or even recognizing my wireless. I know its not the CDs because they work fine on other (much older) computers.

View 2 Replies View Related

OpenSUSE Hardware :: 11.4 Fstab Entries For CD / DVD (and Floppy) Drives Will Not Mount After 11.4 Install Or Upgrade

Jul 29, 2011

After installing 11.4 my fstab entries for CD and DVD drives as well as floppy generate errors when I try to mount them automatically or via Nautilus when inserting CD or DVD. The icons and CD/DVD name show up ok but will not mount. Manually mounting via terminal command works. Here are the relevant lines from fstab

[Code]...

In /dev scd0 and scd1 are symlinks pointing to sr0 and sr1 respectively. The above error message was generated after attempting to load a CD in scd0 i.e. my laptop internal CD/DVD drive. Lines 10,11 and 12 are the fstab lines quoted above.

View 6 Replies View Related

CentOS 5 :: Install The Most Basic FTP Server Available Just So We Can Share Files Back And Forth Between Test Hosts?

Mar 11, 2011

For use on a test LAN, ie. security is not an issue, I need to install the most basic FTP server available just so we can share files back and forth between test hosts : launch FTPd, have it share a directory through either "anonymous" or a single, shared login/password?

View 8 Replies View Related

General :: Doesnt Recognise My Floppy Drive - Cant Install My Printer A Samsung ML4500 Laser

Dec 24, 2010

I have recently installed linux 'uberstudent'and find it doesnt recognise my floppy drive but more importantly I cant install my printer a samsung ML4500 laser. There are readme files (reproduced below) but I just dont know enough about the system to know what to do with them " does it mean anything to anyone ? I am a bit reluctant to experiment with terminal incase I mess up the entire system ! also could their be a connection between this and the floppy not working ?

1.AUTORUN will not run

2.clicking cdsetup.exe and selecting 'open with archive manager' results in : 'an error occured while loading the archive'

3.clicking cdsetup.exe and selecting 'open with wine windows programe loader' results in 'samsung printer setup window'etc, and it appears to load normally until 'PROGRAM ERROR 'DAC1.EXE encountered problems and has to be closed.

4. Inside the linux folder are three file's, copied and shown below

The first file is entitled :

View 4 Replies View Related

Ubuntu :: Cannot Install WinXP - No Hard Disks Found

Jul 29, 2010

I have a laptop HP Pavilion, on which I installed Ubuntu 10.04. I erased the whole disk and used the option manually define the partitions.

Here is my partition table given by gparted:
Partition File system Mount point
unallocated 1 MB
/dev/sda1 vfat /windows
/dev/sda2 ext4 /
/dev/sda3 extended extended
/dev/sda5 linux-swap
/dev/sda4 ext4 /home

I installed Ubuntu and everything went fine. But now I want to install WinXP from an original Microsoft CD-rom and I get the follow error:
Unable to install windows, no hard disks found, contact your dealer (or something like that, it is translated from Dutch).
I tried everything, formatting my hard disk with gparted NTFS, formatting mkfs.vfat, with no luck.

View 4 Replies View Related

Fedora Installation :: Try To Install With Normal Settings / Basic Video Deriver Setting It Says 'X Failed To Load'

Mar 29, 2010

I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved