Installation :: Live Disks Won't Install Drivers Or Install?
Feb 19, 2009
So far I've tried gOS, Linux Mint, Ubuntu, and SuZE. The result is the same: The live disk runs, opens up but the graphics are shoddy, sound doesn't work, everything is very slow, and in attempting to partition and install the os, it stays at "Resizing partitions 0%"I know Live disks are going to be a bit slower, but this is super slow and this computer is just a few months old. Usually the live cds have a database of drivers for common media but it just isn't accelerating the graphics or even recognizing my wireless. I know its not the CDs because they work fine on other (much older) computers.
View 2 Replies
ADVERTISEMENT
Mar 19, 2016
I have a Mac Pro 1.1 and am having trouble installing Debian. I installed rEFIt but it won't show my install and live disks at startup. I have very little experience with the command line but would be willing to try. I have installed debian to my pc and used the command line successfully there, but want the OS for my mac.
View 4 Replies
View Related
Jan 19, 2010
I have installed Fedora 12 i686 Live to a 200 mb partition on an external drive. Before the install I created a 6.7 GB ext3 partition and a 45 GB ext3 partition. The live cd copied the image to a 200 mb partition.
partition 2bce0f9d-53a6-4ec2-b5ad-1a6915c74260 is 45 GB
partition 4683EB23BED2EB34 is 102.6 GB NTFS
partition b7240ff1-0807-42ba-e172-bff5872519ad is 6.7 GB
[code]....
Will creating an entry in fstab sdb6 and sdb8 allow the fedora distrib dvd to install to the external hd? How do I create the entries?
I have a raid0 hd with windows xp pro. When i try to shrink the partition using anaconda, I get a disk error and the comper locks up. I have to shut off the ups to reboot.
View 11 Replies
View Related
Aug 3, 2011
Since there is no "Additional Drivers" app in Fedora like there is in Ubuntu, how the heck can I install the Broadcom STA drivers from the Live CD without using an Ethernet cable? And how the heck can I ensure that they stay installed, even after installing Fedora? I suppose putting the RPM on a USB Flash Drive will work, but that's the only thing I can think of... And is there an RPM out there for this specific driver?
View 8 Replies
View Related
Mar 1, 2011
Installing Ubuntu 10.10 desktop.on a Highpoint rocketraid 2642.Installing Ubuntu, it does not find the drive?How do I install the drivers to install and boot after the installation from the raid drives?
View 1 Replies
View Related
Nov 4, 2009
I have 600GB striping disks with 3 ntfs partitions, 2 ext4 partitions and 1 swap partion containing ubundu 9.10 and 120 GB free space. When I try to create new ext4 partitions with the fedora dvd I get the message: Could not allocate requested partitions. Not enough free space on disks, no matter how small the partitions I try to create. I created logical partitions.
View 3 Replies
View Related
Dec 14, 2010
I fail to install OpenSuse 11.3 with Raid-1. What I do: Partitioning -> Expert. sda1 type RAID do not format / mount, sda2 /(root) type RAID do not format / mount, sda3 /home type RAID do not format/mount. Clone disk to sdb. Raid -> add md126p1 type swap mount to swap, add->md126p2 type etx4 mount to /(root), md126p3 type ext4 mount to /home. Bootloader: GRUB, boot from MBR enabled, boot from / disabled. After installation the system does not boot and grub reports error that the specified filesystem can not be found.
View 9 Replies
View Related
Jan 11, 2010
I just bought two 320GB SATA drives and would like to install F11 with software RAID 1 on them. I read an article which explains how to install RAID 1, but it used 3 disks: one for OS and two clones. Do I really need a third disk to install RAID 1 configuration? If 2 disks is enough, then should I select "Clone a drive to create a RAID device" during F11 installation as explained here?
View 6 Replies
View Related
Feb 21, 2010
Using install disc burned from ubuntu-9.10-desktop-amd64.iso ; disc verified. Could not install because installation hung during partman. Booted into LiveCD (using same disc), and GParted works, but partman does not.
I've searched Google and this Forum with no luck; but perhaps I'm just not asking correctly. Any help - even a workaround Is there a way to use something other than partman, or to mount the root, home, and swap in a way that makes partman skip it during install?
View 2 Replies
View Related
Oct 11, 2010
I'm trying to install Ubuntu 10.10 in a desktop computer with three disks. SDA with NTFS in SDA1, where I have Windows XP, SDB where I had Ubuntu 10.04, and SDC where I have an NTFS partition. I want to install Ubuntu 10.10 in SDB without loosing the data in SDA and SDC. When I try to install it, when I choose specify manual partition, I only find this: Where is SDB abd SDC? What do I choose in Device for Boot Loader Installation?
View 2 Replies
View Related
Feb 22, 2011
I tried to install Ubuntu 10.10 Server 32bits and 64bits but each time the installer stopped at 45% during "Starting up the partitioner" with the message "Scanning disks".
I installed Windows 7 64bits on the disks without problem.
I installed IPCop 1.4.20 successfully.
However, I tried to install Fedora 14 32bits and 64bits but it also stopped (ie crashed the partitioner) during the "Install To Harddisk" via LiveCD.
Similarly, OpenNode 1.0 also crashed with a bug report that has alot of python error messages. All mean nothing to me.
I even tried to partition the disks first via Fedora 14 LiveCD. Still the same thing.
Has anyone encountered this sort of problems before? If so, any resolutions?
Could this be the problem with the SATA2 disks?
View 7 Replies
View Related
Jul 8, 2009
I try to install by clicking "Install to Hard Drive" icon on the desktop, but it's not responding. And then i try '/usr/bin/liveinst' and i got the following error :
Code:
umount: /media/*: not found
07:27:29 Starting graphical installation...
Traceback (most recent call last):
File "/usr/sbin/anaconda", line 876, in <module>
[Code]....
View 9 Replies
View Related
Sep 11, 2009
This usb-memory-stick loaded wtih fedora11 and 4GB space for persistence runs nicely
When I click install icon and choose "shrink other partitions" or "use free space for installing", it aborts.I've tried installing on C hard drive and on 300GB-usb-disk with lots of free space; still won't work
View 1 Replies
View Related
Nov 12, 2010
I cant install fedora on my pc from live cd because my hard disk has many bad sectors anyone knows how to fix this?
View 14 Replies
View Related
Nov 14, 2010
I have a 32gb flash drive that I'd like to install Ubuntu 10.10 too. As if it were just a normal installation. Boot loader and all just on the stick.I would be attempting this from a Windows system. I do have a burned copy of the Ubuntu 10.10 live CD.
View 9 Replies
View Related
Mar 20, 2011
I'm attempting to install Ubuntu on a Gateway laptop that is a 3.06 gigahertz Intel pentium 4 with 1 gig of ram. I'm using the live cd but can't get the computer to boot to the cd. My BIOS is set to boot from cd/rom but I'm not getting the typical Ubuntu menu, which includes install, when I boot the computer. I get the Ubuntu loading screen with the graphical loading dots and when that completes I get a blank screen. I've installed Ubuntu on 4 or 5 other PCs and have never had this problem. I'm trying to completely remove XP and replace with Ubuntu 10.04 LTS. Normally on booting from the Ubuntu cd I get a menu immediately which includes complete installation, but not with this computer.
View 9 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
Dec 7, 2009
I am trying to install F12 on my desktop. I previously had F9 installed. I zero-filled the harddrive before attempting installtion. When attempting to install F12 from the DVD I get various messages about needing drivers. The drivers listed seem to run the gamut from network cards to harddrives. I have an SATA drive installed as my primary disk. I have not been able to install any version since F9 so I thought I should finally try to nail down what is going on.
View 14 Replies
View Related
Feb 3, 2011
AFAICT, F14 does not have any formal support right now (no rpms, etc), and there are some pitfalls to using the ATI installer which I am sure have resulted in system re-installs, unhappy faces, and people stuck without a proper driver. This is because while the installer seems easy to use, it's unfriendly in so far as it does not check for pre-requisite software first, and when it craps outs, it doesn't tell you anything is wrong, but it will leave your system without a functioning X server. The first time I ran it, the GUI installer told me everything was complete and that all I needed to do was reboot! When I did, X would not work, and reinstalling the original xorg-ati driver, etc, did not fix it.....
View 3 Replies
View Related
Jul 20, 2011
I am having some issues compiling my WiFi card drivers. I haven't encountered this issue on any other distros (including Fedora). I would prefer to use openSuSe however so I hope someone here could tell me how to solve this.I have a fresh install of the x586 DVD, fairly complete.The issue is picture in the attached image: basically I try to run a make and I get the pictured error.
View 3 Replies
View Related
May 13, 2010
I'm running wubi with Ubuntu 9.10 off of windows xp. My webcam is a SiGma Micro ID 1c4f:3002. This website [URL] says it has drivers for my webcam but I have no idea how to install this and I'm very confused.
View 1 Replies
View Related
Sep 15, 2010
A Linux user for about 10 years, distro hopping for half of them. Finally found peace with PCLinuxOS (great distro), and MintLinux. When Mint went over to Debian, I thought why not try the original, so here I am.Booted the dvd, checked everything was working well (excellently, actually), and started the install over an existing PCLinuxOS system (dual booting with XP). First time installed while inside the gnome system, from the desktop icon, second and subsequent times from the welcome screen after boot (only text modes were available).In all cases, everything goes fine until I partition and install the packages. Partitioning is no secret to me, unless there is a "Debian way" of doing it: went through "guided partitioning," and chose the existing PCLinuxOS partitions, 37 Gb for /, ext3 (tried ext4 later with same results), and 2 Gb for swap, both on sda (sda1 and sda5). This is a full hard-disk, just for Linux. The other disk is for XP (sdb).
Tried formatting existing partitions, erasing contents of disk, and keeping as is. In all cases, when partitioning is done, the system installation fires up and I see all packages being transferred (up to 100%). Then I have a pop-up window telling me to continue to package manager, which I do, but then I get a message saying that I am trying to install on an "unclean target," over an existing installation (even after fully erasing the disks). It asks whether to continue or not and, whatever I do, I'm taken back to system install again, and see the progress go up to 100% and the same question again.
If I go back to the install menu and ignore the message, jumping to installing grub, I get an error message saying that grub install has failed, and that's it. I can't progress further because of these error messages.If I ignore all and boot without the live dvd, I get a prompt and nothing else, and I can't even use XP. Basically, I'm stuck unless I install another distro again to have a working system.First searched this forum and Google to get answers to this problem, but couldn't find anything applicable to my case.
View 14 Replies
View Related
Jan 2, 2011
I burned an .iso of a recent Squeeze Live DVD - KDE edition. I was checking it out but I'm not sure it's reliable for installing.I was wondering if anyone has tried it or could comment.I noticed a few things that was a bit disconcerting.One, there were a lot of 'question marks' in the kickback menu.Is that normal?Two, when you (I) try to reboot the system or otherwise 'leave' the live state, it doesn't reboot properly.Some distributions will 'shut down' and then give you a prompt for taking out your CD or DVD and then there is some script or program that reboots the machine for you. But, the Debian Live DVD I used didn't do that. It's a recent one, dated Dec. 20.What happened is that it just looped back and re-started.There was no prompt or even much of a delay. I couldn't open the optical drive tray at any time.I had to cold restart the machine so I could take the DVD out.
I was disappointed since I thought it is a good project and a worthwhile venture to try and have a live media option for installing the later editions of Debian such as Squeeze or if they can keep up progress, whatever edition it's at.I am a bit hesitant to try this version for a true install so I am wondering what others say.I thought I should go for the 'desktop Squeeze/Testing AMD-64-KDE' CD ISO instead?There's no live media but I have tried the live DVD so it looked okay other than the two issues mentioned.
View 2 Replies
View Related
Feb 16, 2009
My Sun w2100z isn't letting me install F10-x86_64-Live CD.
I get the following error whenever I try to boot from the cd. It loops forever...
Any suggestions other then using the full Fedora 10 DVD/CD Media?
View 5 Replies
View Related
Jul 18, 2009
So lets start with my laptop. I am currently running windows vista 64-bit and I usually experiment with linux on a virtual machine but I decided to try and put it on as a dual boot os. I have x3 320gb hdd (7200rpm) on raid5, x2 1gb nvidia gtx go running sli, 8gb ram, 2.8ghz core2 quad, and random other things that aren't important. Point is that my system should run anything I throw at it.
So I downloaded Fedora 11 from a torrent and burned the iso to a disk. When I run it, it pretends its going to run it, it comes up with a log and loads stuff and all. But then it just hangs.. it doesn't do anything, no live starts, no nothing. Its just a blank screen with a blinking underscore in the top left "_" so I type and my typing shows up and thats it. Any other time I've used Linux I've never had to put in a command or anything to start, so I don't know what the problem is.
View 3 Replies
View Related
Nov 17, 2009
i am not sure where to post this issue since i am using RC4 of FC12 so posting it here.I am using the Live-CD to install FC12-RC4, it is gnome x86_64. The issue is as follows:I never had this with OpenSuSE. Mandriva & Ubuntu all of which is the latest release. Why the installer has to initialize the hard disk?
View 9 Replies
View Related
Oct 21, 2010
For the last two releases I've used pre-upgrade ( F11>F12>F13 ). While F13 is working OK it's showing one or two minor glitches, such as the odd hang and sometimes part of the Gnome taskbar doesn't load. I realise these may be just F13 issues, but in case they're due to accumulated errors in two updates I'm planning to back up and do a clean install of F14 - once the feeding frenzy has died down.
The question, as posed in the title, is whether to D/L the full DVD or install from a live CD and add the apps I need. For instance, I don't need to network with my other computers - data transfer is by ' sneakernet ' with a pen drive - and I'm sure there's quite a bit else I can live without which the standard DVD install will contain, such as chat. Conversely, I'll be installing some extras such as Google Earth using AutoX.So basically, will installing from a live CD be any real benefit or will I just be making work fro myself? I frequently notice updates which don't seem to have much to do with the apps I use regularly, but they may contain essential dependencies.
View 11 Replies
View Related
Feb 18, 2010
I am running a Dell Dimension 3000 and I intend to install Ubuntu on it. On it, there is a partition, Dell Utility Partition, which I am hesitant to overwrite. The main partition which I want to install Ubuntu on I formatted in ext4. I try to install Ubuntu from the live cd, but it won't allow me to strictly use the ext4 partition. It insists to either use the entire drive or to have me manually choose the partition. How would I go about doing that? I relatively new to Linux in general
View 2 Replies
View Related
Mar 18, 2010
I want to install Kde desktop on ubuntu 9.04, is there any way to do it from my kubuntu 9.04 live cd. Another question is that i recently find that many useful packages and many dependencies for it are available in a disk of my 64 studio. I am also able to install them just by clicking on that .deb files. But i find it difficult when i need to install dependencies since it take a long time to search and find it though they are available in the same disk. Is there any way to install it easily.I mean to install the packages and there dependencies from cd using some simple terminal command or something.
View 1 Replies
View Related
Mar 23, 2010
I installed from the live CD, and then it tries to setup MythTV. The screen goes black & there's an outline of a window or dialog box or something. I tried this once before & got outlines like this with outlines of text boxes & pull down fields inside. I could get it to go on to other similar screens by guessing when I was at a "Next" button and hitting Enter.
View 1 Replies
View Related
