Ubuntu Networking :: Network Controller Has No Logical Name
May 26, 2011
I've just begun with a fresh USB install of Ubuntu 11.04, and have run into the seemingly standard wireless network issue with the Broadcom 4311. I've read countless posts on this forum, and have installed the STA driver "proprietary..." through the GUI driver installer.
The usual symptoms seem to persist; I can connect to the network using my wired connection, but when I unplug no wireless network connections kick in, or show up, or seem to be responsive anywhere..Also, I should note that I've read the forum post HERE but without much further understanding or resolution.
View 4 Replies
ADVERTISEMENT
Jan 6, 2011
Is it possible to automate the configuration of a servers raid drives (my system has a HP Smart Array P400 controller) or does that have to be done manually? Right now, when I get a rack of new servers, I have to go through each one and use the ORCA tool to setup the logical drives. I'm hoping there is some way to automate that. And forgive the lame question, but I am assuming you have to configure the logical drives before you can install the OS?
View 3 Replies
View Related
Apr 20, 2010
I have a Fedora Box with chillispot loaded for a captive protal wifi network. I am needing my office lan to connect to a controller on the WIFI network. I have tried many different firewall rules and have only momentarly able to ping something on the other network. here's some configuration info and my firewall rules that I thought should work.
FC 4
ETH0 - WAN (office lan 192.168.24.201/24)
ETH1 - LAN (brought up as 192.168.10.1/24)
tun0 - chilli 192.168.240.1
[Code].....
View 33 Replies
View Related
Feb 13, 2010
I recently installed Ubuntu 9.10 on an old family laptop. It is a Compaq Presario V2000. Everything works perfectly except no wireless networks are recognized, even though I know there are available networks. My network controller is detected but is not doing it's job, which is finding available wireless networks! Using "system testing" I found this out about my network controller:
"Detecting your network controller(s):
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)"
url
View 3 Replies
View Related
Feb 11, 2010
I installed the 64-bit version of Fedora 12 on my MacBookPro5,1, and I am unable to establish a connection to my wireless network, which I can connect to fine with I boot the computer into Mac OS X. Here is my operating system information:
Code:
$ uname -a
Linux tosh 2.6.31.12-174.2.3.fc12.x86_64 #1 SMP Mon Jan 18 19:52:07 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
Here is information about the PCI devices available on the system:
Code:
$ lspci
00:00.0 Host bridge: nVidia Corporation MCP79 Host Bridge (rev b1)
00:00.1 RAM memory: nVidia Corporation MCP79 Memory Controller (rev b1)
00:03.0 ISA bridge: nVidia Corporation MCP79 LPC Bridge (rev b3)
[code].....
View 7 Replies
View Related
Apr 28, 2009
At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
View 1 Replies
View Related
Aug 22, 2011
After fixing drive partition numbers, I got the following error from cfdisk: Code: FATAL ERROR: Bad logical partition 6: enlarged logical partitions overlap Press any key to exit cfdisk However, I can see all my partitions with fdisk and gparted, I can mount and use all of them.I used the following guide to fix the drive numbers order: Reorder partition drive numbers in linux | LinkedBits Does somebody know whet is cfdisks problem and how can I fix it?
View 6 Replies
View Related
Sep 15, 2010
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
View 4 Replies
View Related
Jun 23, 2010
I am looking for a way to deploy Linux in the same manner as a MS network. I want my desktop clients to authenticate against a DC, but Im not sure what would take the place of a Domain Controller in Linux. In addition, I am not sure if I could be able to manage user rights via a central server.
I have read about Samba as a domain controller, but Im not sure if that is what I want. In addition, I have read about LDAP, but again Im not sure if that is what I need to use. When I researched RADIUS servers, I was even more confused.
View 1 Replies
View Related
Jun 18, 2010
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
View 2 Replies
View Related
Jul 12, 2011
I'm fairly new to fedora, and I installed it on my gateway kav60 netbook. Everything works fine, except that the wifi is saying that the firmware is missing. Is there a way to fix this?
View 1 Replies
View Related
Apr 16, 2010
I have the following problem: I can't authorize with my central WinNT 4.0 domain controller. I set up all parameters in YaST, but still can't see any shares or get inet access.I am using gnome and it shows several windows workgroups. While I am trying to open it, gnome shows a window to request my login credentials. I am setting up all thing right and then it shows it again. I tried smbclient utility to login, but still can't login.What can I do about it?Also I have some problems with my http proxy: suse doesn't sent it my login/password while I can easily work with proxy, that doesn't request it
View 1 Replies
View Related
Jan 16, 2010
I've been trying for probably 10 hours now to get the bcm4306 driver working on Debian. I finally got it installed using ndiswrapper... However, now ndiswrapper says that the hardware is not present! When I run lspci, though, it lists BCM4306 as the network controller. What is going on, and how do I fix it? It's on a Dell latitude D600.
View 3 Replies
View Related
Aug 11, 2010
i've been an intermediate-level linux user for some years, and now i'm supposed to set up and manage a small network for our research group. we have 5 linux boxes with ubuntu 10.04 (actually i'm installing everything we need in one box and will attempt to clone the others with clonezilla). i've 2 questions:
1) i'd like to manage all user accounts from one pc (server? so to say), so that every user can log in any of the 5 machines with the same passwd etc. what is the best/easiest/most stable application/protocol to manage this?
2) is it possible to create a network logical volume, based on the individual HDs and visible to all boxes? something like a RAID0 over ethernet?
View 1 Replies
View Related
Jun 25, 2009
I've an USB Network Controller product from China with no driver for Linux... It's seem in my FC10 not correctky fuctional... On Windows it worked as SR9600 USB To Fast Ethernet Adapter... here is my log...
Code:
[root@home ~]# dmesg | grep USB
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
[code].....
View 1 Replies
View Related
May 3, 2010
using this Azio Wireless PCI Adapter[URL] (Network controller: RaLink Device 0701)
View 11 Replies
View Related
Jul 28, 2011
Basically I am looking for a simple way to create a universal nickname/alias for a interface.We ship servers that have upto 6 NICs on them. The user can have those NIC configured as either ethN, bondN or vlanN interfaces. As we need to provide NIC status information we would like to be able to run commands such as
Code:
ifconfig INTERFACE1
that would map to whatever the user had already configured.
View 1 Replies
View Related
Jun 9, 2010
I'm having a problem connecting a motion controller through the Ethernet port. Here is what it does If I connect the Ethernet cable from the computer to the controller, the connection is not recognized. If I connect it from the computer to my router, it will connect automatically. If the computer is connected to the router, and I unplug the router and quickly connect the controller, it will automatically recognize it.Also, when I connect the controller with quickly unplugging the router, I can't manually connect it using the wired connection "Auto eth 2". When I click on it, it thinks for a while and then says Wired Network Disconnected.
Is there a way to initialize the Ethernet port automatically to recognize the motion controller, or is there a way to do it using C++ (that is what I'm suing to communicate to the card since it has special libraries) I find this kind of weird. I want to just be able to plug in the controller and be able to use it.
View 3 Replies
View Related
Oct 16, 2009
I have a network (192.168.x.x) that I want to keep closed and private for the most part. I need however to get access to some files generated on the machines in this private network. So I first tried putting two cards in a machine running centos 5.2 and connecting one to the private newtork and the other to the public network. This worked somewhat but I was not able to see this bridging machine in the private network because I could not run 2 samba instances on this machine ( I need one for the public network). So I setup xen on a machine with the 2 NIC's and assigned one card to the host dom and the other to the guest dom which was connected to the private network.
This worked ok, but the only issue was the shared disk space. I couldn't use nfs because each machine operates in a different subnet and I don't know how to export a nfs drive across domains. So I created a logical volume on a disk and mounted this in both domains.
Here comes the question now. This works some times,. but at other times I copy files from the private machine to the shared volume but i can't see them from the other domain. Also sometimes the guest domain which houses the private network server hangs during boot up saying that the logical volume has been assigned and cannot be mounted.
1) Is what I'm doing using logical volumes across domains legal (best practise, etc)
2) Is there another way for me to achieve what I want (sharing a disk partition across domains).
View 1 Replies
View Related
Mar 23, 2010
I just installed the latest version of Mint xfce on my old inspiron 8000 with a microsoft MN-120 pci ethernet card, and though the card shows up as hardware, it is not recognized as a network interface. I believe there is no driver loaded for it.
It's an old card, but it seems the kernel still supports it. There are instructions for activating the dc driver that appears to be the proper driver for this chip set, but those instructions originated from freebsd and I'm not sure they translate well. See here:[URL]
I did find a kernel config file, but I was afraid to add the suggested lines to it because there were no other lines specifying "devices". They all started with "config".
View 2 Replies
View Related
Jan 12, 2010
what kind of network between cloud controller and nodes, is required for a proper cloud installation? I mean, Does all machines needs to be in same network, in same lan, or may be in MAN or WAN ? how much should be network throughput? 1Mbit/sec , 10Mbit per sec, or 1Gbit/sec? I ask because I need to know the possibility of running nodes on different locations.
View 1 Replies
View Related
Apr 7, 2010
I have up to 300 PC in Ministry of Higher Education, I want to use UBUNUT server and UBUNUT Desktop for my network, But I am really not so familiar with UBUNUT Server just a little bit, finally here is my questions: Can I do these roles 1- Domain Controller. 2- User Accounts. 3- File Sharing. 4- Web Server. 5- Print Server. 6- Internet Sharing. 7- Web Chaching. 8- web proxy. 9- Firewall.
View 2 Replies
View Related
Apr 18, 2011
I'm using Ubuntu Server 10.10 64 bit and am trying to get my Atheros AR81xx gigabit ethernet controller to use 1 gbps.I have 2 ethernet controllers, one's a linksys 100 mbps (which is connected to the router which goes to the internet) and the other is the Atheros gigabit controller that is connected to a Windows desktop that has an NVIDIA gigabit ethernet controller (for faster file transfers with a gigabit connection) I've ruled out that the problem is with the desktop as I plugged the windows PC into my macbook (which has a gigabit controller), and both the macbook and desktop report a gigabit connection.
I plug the windows desktop into the server and I only get 100 mbps. I am using a Cat 6 patch cable. I've tried several methods with ethtool to force it into 1 gbps mode, but none work. I've tried using a different cable. no change. I've tried making windows force a 1 gbps connection, didn't have the option to in the driver configuration. Only 10/100 configs. the commands I've tried in ethtool
Code:
ethtool -s eth0 speed 1000
Reports no error, but no effect. I've tried forcing off auto negotiation (I had a hunch it was causing the problem)
Code:
ethtool -s eth0 speed 1000 duplex full autoneg off
I get this
Code:
Cannot set new settings: Invalid argument
not setting speed
not setting duplex
not setting autoneg
I tried each setting individually, and autoneg won't set, the others will (but not do anything)
View 4 Replies
View Related
Jun 12, 2011
I use Linux Mint Debian XFCE and there was a large update (lots of programs) I have done prior to rebooting. After reboot, my computer can now no longer find the ethernet controller anymore in lspci, so my wired connection no longer works.
Is this a hardware issue? The green lights are all blinking fine though.
View 1 Replies
View Related
Aug 1, 2009
I have a Dell XPS M1330. I installed Fedora 10 on a separate partition and left Vista on the first. It was working just fine and for some reason all of the sudden it is not recognizing the Wireless controller. Vista is still working fine although I did get a couple of "WLAN controller has stopped working" errors. I suspect I may have a physical problem with the controller but I'm confused as to why Vista is still using it but Linux is not. The actual physicall "WIFI" light on the laptop does not even illuminate when I boot Linux. No wireless networks appear in the network list under Linux. Particularly since it WAS working fine for months...
View 4 Replies
View Related
Jul 3, 2011
i am having issues with networking on a certain liveCD.all ubuntu installs ive done on this machine im sure work fine, but i may have had issues with older backtrack versions.My issue is no networking on boot of SamuraiWTF, for those unfamiliar its based on ubuntu 9.04 There is nothing except lo loopback when i run 'ifconfig', and there is nothing in /etc/network/interfaces for eth0 either.
lspci shows a Broadcom driver, but the same command shows the model number etc on a newer ubuntu install on the same machine. This is:
Broadcom NetLink BCM57780
I have the latest .tar.gz of the tg3 drivers suggested by Broadcom, but im lost on how to install them.
-------------------------------------------------------
EDIT: it seems to be an issue with earlier kernels, i installed 2.6.35 and it worked but the kernel isnt mean for 9.04 i dont think, and now theres issues with the nvidia card
View 4 Replies
View Related
Dec 1, 2010
I am not able to configure ubuntu 9.04 on network ,
i get error Network UNCLAIMED. error ethernet controller is BROADCOM Corporation Device 1692 ( rev 01)
View 3 Replies
View Related
May 28, 2011
I patched my wireless driver in order to support packet injection. Using this tutorial:
- Install the Firmware:
Code:
- Create new directory:
Code:
- Now disconnect Internet and unload all your driver (use rmmod command)
- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:
Code:
Blacklist the wl driver: (STA driver)
Code:
Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:
FATAL: Error inserting b44 (/lib/modules/2.6.35-29-generic/kernel/drivers/net/b44.ko): Invalid argument
View 9 Replies
View Related
Feb 12, 2010
I wish to promote a "normal" installation of Suse as a domain controller with LDAP so the other computers in my network need to use a centralised username and password to log onto the machines.The only documentation I can find refers back to suse 9.
View 2 Replies
View Related
Nov 4, 2010
I have just installed Ubuntu 10.10 on a pc as a duel boot, On the computer I use a belkin surf and share n speed controller to connect wireless ( pc doesn't have a wireless connection) I have found the correct driver RLT8192SU from realtek and unzipped it and moved the contents to a flash drive. The problem is I am a total noob to Linux based systems and i have no ideal how to install the contents, there is a read me file but it makes no sense to me and i have absolutely no clue how to install the driver so i have no internet. Is there an easier way to install or step by step instructions?
View 6 Replies
View Related
