Ubuntu :: Finicky Error Message When Boot Into 10.10
Mar 16, 2011
I keep getting this error message pop-up on rare occasions when I boot into Ubuntu 10.10. I don't know what it means or what it's for. I tend to hit "Don't delete" and then restart the computer. It only really crops up once every 30 or so boots of Ubuntu, or if I've done a lot of updates through the update manager. Oh yes, whenever this message appears, the Rubbish Bin vanishes from the bottom right. Everything tends to be fine after the restart.
View 9 Replies
ADVERTISEMENT
May 4, 2010
I download a few times and burned a few CD's but after I select install on hard disc or use the livecd the computer will hung up and then I have a message saying boot error, I download the iso image from 2 different sources but still not working. I'm installing on a Dell 500 with 256Mgs of memory (I have Ubuntu installed but its too slow).
View 1 Replies
View Related
Feb 19, 2011
when attempting to boot ubuntu, an error message flashed, and my computer restarted. This happens every time I choose "Ubuntu" on the loader. The error flashes to quick to read, but I think the first line is something like
Code:
Try: error
how I can slow down the error message, or, even better, fix it?
View 2 Replies
View Related
May 7, 2011
A couple of months ago I bought a new Dell laptop with Windows 7 pre-installed. Rather than strip the hard drive and go with Ubuntu exclusively, I left W7 on and set up Ubuntu 10.04 as a dual boot installation. All was well for a month or more and now suddenly W7 won't boot. The Windows error message I get is The boot selection failed because a required device is inaccessible I've purged and reinstalled Grub2 several times with no luck. Also tried Windows fixmbr which allowed W7 to boot but made Ubuntu inaccessible. Below is the output of the boot_info_script.
[code]....
View 1 Replies
View Related
Jun 25, 2010
After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
View 1 Replies
View Related
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
View Related
Jul 28, 2011
While installing linux, i got error message when i tried to create LV for /boot... i checked with my friends n they told me that /boot should be a standard partition... why is that, i asked them but they had no good explanation for it... could someone please explain me why do we create standard partition for /boot, why can't i use LV??? also i heard that its good practice to create separate partitions (LV or standard) for /, /home, swap & other major directories instead of 1 partition for all these.
View 7 Replies
View Related
Jul 16, 2011
I am quite new to Linux, so bear with me if I ask silly questions. For homework (and fun) purposes I needed to create a bootable USB of Fedora12. Which I did, successfully I might add However, when I rebooted the computer, I got this puzzling error message code...
What have I done wrong here?
View 5 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Jun 10, 2010
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies
View Related
Nov 8, 2010
I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?
Code...
how can i fix this error?
View 1 Replies
View Related
Mar 28, 2010
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies
View Related
Aug 11, 2011
I have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
View 12 Replies
View Related
Oct 23, 2010
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
View 1 Replies
View Related
Dec 31, 2010
Using IMAP to retrieve emails in Evolution is not working correctly. Some messages are recieved, others are not. Those messages that cannot be recieved, reports the following error message: Unable to retrieve message
Running the following;
evolution 2.28.3-0ubuntu10
Ubuntu 10.04.1 LTS
2.6.32-26-generic
View 4 Replies
View Related
Apr 30, 2009
Hi I am running a fedora 10 desktop. when i send an email using evolution the message was not sent but returns a error message:"Error while performing operation.DATA command failedError: 550 Viagra SPAM - Hi in Subject" and the message did not have an attachment just plain words. what might have gone wrong for i have been using this for sometime without a problem. or what security measures should be in place to remove this viagra spamAm I infected by virus on this fedora, all my updates are up to date.
View 1 Replies
View Related
Nov 10, 2010
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies
View Related
Apr 3, 2011
I am using lucid. it works fine for some day & suddenly freezes .then on rebooting it shows "read error" . if tried to boot from live cd it just stuck on blinking cursor. but if i removed "battery cell" from motherboard & then rebooted after some time sometime I can boot again. Is this due to wrong bios configuration or it is related to dependency or broken packages or something else. due to same error I have 3 reinstallation in this week . I am using lucid for last 10 months without any problem but last months grub rescue error changed things dramatically. on boot it shows " S.M.R.T. Ultra D.M.A. mode capable but disabled "
View 1 Replies
View Related
Sep 15, 2010
my pc refused to boot up with the "error 15" message. I dual boot so I then tried to boot XP - same message. I then went back to Ubuntu and it booted. Since then, 2 days ago, booting up has been erratic with both Ununtu and Windows and the pc is now virtually unusable. I had, just once , the following error message - "MP-Bios bug, 8254 timer not connected to 10-APIC. Kernel panic - not syncing : 10-APC + timer doesn't work." After 24 hours of struggling, it has finally booted up but I am now afraid to turn it off in case it doesn't boot again. I tried Super Grub and booting with my original 10.04 cd but that wouldn't run either.In desperation I have tried to re install Ubuntu but I can't do that either.
View 7 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
Feb 21, 2010
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
View 8 Replies
View Related
Oct 23, 2010
[code]...
Gives error message permission denied. I've seen this in your forums but I still haven't found the fix. I've tried the latest release Wubi downloader too. This one is ran from a CD. Version 10.04
View 3 Replies
View Related
Nov 24, 2010
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies
View Related
Nov 5, 2009
I have Ubuntu Jaunty & Linux Multimedia Studio 0.4.2. In attempt to update to LMMS 0.4.5, I downloaded & attempted to install : lmms_0.4.5~ppa-1jaunty_i386.deb and got the following error message : Error : Dependency is not satisfiable : lmms-common (=0.4.5~ppa-1jaunty). What went wrong and is there an easier way to update ? Also, should I remove the older version or just install the latest on top of it ?
View 5 Replies
View Related
Feb 20, 2010
I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating
View 2 Replies
View Related
Jan 28, 2011
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Mar 21, 2010
Something go wrong with php and Apache, at first, the $GLOBALS array is looking like this
Code:
Array
(
[code]....
View 2 Replies
View Related
Nov 14, 2010
I have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies
View Related
Jul 5, 2011
when I connect my iphone (3GS, 4.3.3) to Fedora 15 it gives me this error: Unable to mount iphone
DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus). The weird thing: after looking in var/log/messages it appears that it is trying to be used by NetworkManager. And when I lookin NM, i can see iPhone as an ethernet device (cable unplugged).
View 4 Replies
View Related
