Ubuntu :: 3rd Re-installation But Still Same Message At Boot "read Error"
Apr 3, 2011
I am using lucid. it works fine for some day & suddenly freezes .then on rebooting it shows "read error" . if tried to boot from live cd it just stuck on blinking cursor. but if i removed "battery cell" from motherboard & then rebooted after some time sometime I can boot again. Is this due to wrong bios configuration or it is related to dependency or broken packages or something else. due to same error I have 3 reinstallation in this week . I am using lucid for last 10 months without any problem but last months grub rescue error changed things dramatically. on boot it shows " S.M.R.T. Ultra D.M.A. mode capable but disabled "
View 1 Replies
ADVERTISEMENT
Dec 2, 2010
I changed my motherboard battery last night, and now get "Read Error" on booting to Ubuntu, on dual boot system. This is the most frustrating thing in an otherwise great operating system. It is the second time I have encountered this issue (last time was a change of power supply). I fixed it last time after three days of re-loading Grub2 and playing around Grub 2 updates, etc. Fixed it eventually, but as usual, no idea of what eventuality fixed it. I think I found a web page buried deep in the 'net, which talked about device.map. Do you think I can find it again - not yet - day 2 searching for the answer... This is what the grub script tells us:
[Code]....
View 7 Replies
View Related
May 10, 2010
I have just installed Ubuntu 10.04LTS however when I attempt to boot the HDD I get the following error message
Read Error
Thats it nothing else, I am able to boot a USB installed version of Ubuntu 10.04LTS no proble. I can boot a Live CD of the same version no problem but when I installed it to the hard drive it just seems to fall over. I've tried adjusting the boot order, putting the HDD first and removing everything else but no joy. Im a linux n00b so no idea what to do next apart from go back to windows.
View 9 Replies
View Related
May 7, 2011
A couple of months ago I bought a new Dell laptop with Windows 7 pre-installed. Rather than strip the hard drive and go with Ubuntu exclusively, I left W7 on and set up Ubuntu 10.04 as a dual boot installation. All was well for a month or more and now suddenly W7 won't boot. The Windows error message I get is The boot selection failed because a required device is inaccessible I've purged and reinstalled Grub2 several times with no luck. Also tried Windows fixmbr which allowed W7 to boot but made Ubuntu inaccessible. Below is the output of the boot_info_script.
[code]....
View 1 Replies
View Related
Jun 25, 2010
After updating my motherboard BIOS, I'm now getting these error messages every time I boot up:
[ 16.157447] ata3.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6
[ 16.157488] ata3.00: failed command: SET FEATURES
[ 16.157525] ata3.00: cmd ef/05:fe:00:00:00/00:00:00:00:00/40 tag 0
[Code].....
I've got a 200GB hard drive, using an ECS SiS 755 A2 motherboard w/1.1b BIOS.
View 1 Replies
View Related
May 21, 2010
I have just installed Lucid Lynx as after a live run of it I thought it was about time to upgrade. Everything ran smoothly in the live version so I backed up my files and installed it. When I went to boot I get this -
Grub loading, please wait ...
Error 2
The strange thing is it seems to be specific to the computer. I have an older, lower spaced desktop, computer that I tried the hard drive in and it worked fine. Problem is its too low spaced for what I want so it seems the install went ok but its something with the computer? How I would be able to boot into the install?
View 9 Replies
View Related
Nov 8, 2010
I upgrade my f13 to f14 with preupgrade but after that i give this boot message.how can i fix this error?
Code...
how can i fix this error?
View 1 Replies
View Related
Feb 27, 2010
I just bought a brand new hardrive (40gb western digital) IDE, 10 pin.I have gone through the installation and partioned the hardrive, when it gets to 100% it asks me to reboot.So i take the disk out, and then it says DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER:So i press enter and i get the same message> How can i get Ubuntu to boot up?The computer is a 2003 Medion pc with 512mb of RAM And an AMD Athlon processor. The computer has a sticker on that says: Designed for windows xp.
View 9 Replies
View Related
Aug 11, 2011
I have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
View 12 Replies
View Related
Mar 28, 2010
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies
View Related
May 9, 2011
Always when i attempt to download any software, an error message opens stating that adobe 8 cannot read it. when saved in downloads clicking open does not function and i cant find an uninstall for the adobe reader 8. I cannot get any anit-virus protection, problem compounded by having no cd input.
View 3 Replies
View Related
May 4, 2010
I download a few times and burned a few CD's but after I select install on hard disc or use the livecd the computer will hung up and then I have a message saying boot error, I download the iso image from 2 different sources but still not working. I'm installing on a Dell 500 with 256Mgs of memory (I have Ubuntu installed but its too slow).
View 1 Replies
View Related
Feb 19, 2011
when attempting to boot ubuntu, an error message flashed, and my computer restarted. This happens every time I choose "Ubuntu" on the loader. The error flashes to quick to read, but I think the first line is something like
Code:
Try: error
how I can slow down the error message, or, even better, fix it?
View 2 Replies
View Related
Mar 16, 2011
I keep getting this error message pop-up on rare occasions when I boot into Ubuntu 10.10. I don't know what it means or what it's for. I tend to hit "Don't delete" and then restart the computer. It only really crops up once every 30 or so boots of Ubuntu, or if I've done a lot of updates through the update manager. Oh yes, whenever this message appears, the Rubbish Bin vanishes from the bottom right. Everything tends to be fine after the restart.
View 9 Replies
View Related
Nov 24, 2010
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
Jul 28, 2011
While installing linux, i got error message when i tried to create LV for /boot... i checked with my friends n they told me that /boot should be a standard partition... why is that, i asked them but they had no good explanation for it... could someone please explain me why do we create standard partition for /boot, why can't i use LV??? also i heard that its good practice to create separate partitions (LV or standard) for /, /home, swap & other major directories instead of 1 partition for all these.
View 7 Replies
View Related
Jul 16, 2011
I am quite new to Linux, so bear with me if I ask silly questions. For homework (and fun) purposes I needed to create a bootable USB of Fedora12. Which I did, successfully I might add However, when I rebooted the computer, I got this puzzling error message code...
What have I done wrong here?
View 5 Replies
View Related
Oct 12, 2010
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies
View Related
Jun 10, 2010
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
View 1 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Feb 23, 2011
I tend to get constant crashes when using internet browsers ( Google Chrome and Firefox ) basically the application hangs not moving in any way, then eventually completely freezes up, the system then locks up and finally crashes.
Upon system re-start I get "Read Error" at boot ( No further information, it literally just says "Read Error" ).
It is sometimes fixed by going into the BIOS and select "Hold on No Error".
I tried installing OpenBios to see if using different BIOS firmware would resolve the issue, but the OpenBios install failed ....so no dice there either.
I am trying to work out if it is a hard drive problem or if it is purely a problem with Fedora.
It was working fine for a couple of months and when it does boot up ... the system works fine, ( Until another crash ).
It seems like the internet browsers crash the system and then the system crashes and can then no longer remember how to boot up.
what this could be that could be software based....if not it looks like I will need a new hard-drive.
View 5 Replies
View Related
Jul 27, 2010
I dual booted xp home ed with ubuntu netbook remix10.4 and in the grub loader (i did side by side install) it shows xp at the bottom (after ubuntu, ubuntu recovery mode, memcheck64 , xp
All of the loaders work fine (ubuntu loads fine, im typing this from ubuntu.) but xp will just say: Disk Read Error. Press Ctrl+Alt+Del
One hard drive is partioned 500GB HD ([440gb XP partition] + [60gb ubuntu])
View 9 Replies
View Related
Apr 8, 2011
I have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.
Here's some info:
Code:
View 9 Replies
View Related
Oct 23, 2010
Just delete a linux partition and now when i boot a message appears and says error: unknown filesystem grub rescue >
I have search on the net for this problem and i have understand it a little. But my situation is a bit different and because i don't want to format my hard disc i wanna try to fix it. So before a couple months i download ubuntu 9.10 and i installed it a month later. But my computer used to crash all the time and i couldnt use it. So i download the latest ubuntu 10.4 and install it while having windows xp and the old ubuntu 9.10(so i had windows xp, ubuntu 9.10 and ubuntu 10.4 partitions). Now i tried to delete the partition of ubuntu 9.10 from disc utility. so i have the message i wrote above when i boot. I dont wanna delete my windows xp and ubuntu 10.4. what should i do to stop this message from appearing.
View 1 Replies
View Related
Mar 10, 2010
I'm installing Sun Virtualbox and get the following error message. The install does not stop or crash, but just don't know what to do about this message:
Code:
An error occurred while loading or saving configuration information for frontend. Some of your configuration settings may not work properly.
[code]....
View 2 Replies
View Related
Mar 17, 2010
I have been using my desktop as a dual boot machine for several months now. The primary hard drive with windows on it died, and since we have been using ubunto 9.10 exclusively, I just removed the dead drive, changed the jumpers on the secondary drive to primary and did a clean install on the drive which presumably formats the disk before installing. When I try to boot from the hard drive i get the following message:
ERROR: no such device 2eb48bcb-7bb4-4080-b04d-fc32dec8c252
View 9 Replies
View Related
Sep 27, 2010
I tried many times to install Ubuntu 10.04 but I keep getting the following error message:
Can't be the CD or the CD drive because I get the same thing with a bootable USB flash drive.
HDD in SATA 1 port
DVD burner on SATA 0 port
HDD formated
Vice versa does not work neither.
Mobo: Intel D945GNT
View 2 Replies
View Related
Dec 11, 2010
I just installed Ubuntu 10.10 but while completing installation at the point when we remove installation CD from drive and go to press enter to restart the system, I saw this error:[2993.693601] end_request: I/O error, dev sr0, sector 537844 like this line there were so many line displayed the I pressed enter the PC got restarted and now Ubuntu running as nothing happened. But I couldn't understand what was that error and how much serious it was.
View 2 Replies
View Related
Dec 29, 2010
I am just now starting to go deeper than the surface of my computer so I am very much a beginner. I have downloaded Ubuntu 10.10 and have tried to install it by mounting the image and installing "inside windows." Next, upon reboot and selecting Ubuntu from the windows loader it eventually went to a colorful screen but stayed there... the first time I let it sit there for 20 minutes or so then restarted, uninstalled/reinstalled tried again... then I let it sit there for 3 hours, nothing. Next I tried to mount image and install "demo and full installation." This time upon reboot I choose Ubuntu from the windows loader menu and an error message came up. I will type it out below exactly as I see it because this is the same message that came up when a friend suggested I boot from a USB drive.
Busybox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) unable to find a medium containing a live file system
View 8 Replies
View Related
