2 hours ago i installed another Mainboard on my system. When I try to boot My Ubuntu 10.10 I keep getting the following errors:
error:hd0,1 out of disk
error: couldn't read file
eroor: you neet to load kernel first
Failed to boot both default and fallback entries.
i've recently changed my mainboard and now i got ati radeon graphic card. i had nvidia on the old board and my display was configured for nvidia.have tried oldcpu guides for ati driver install but it has failed.
View 9 Replies View RelatedSince I was change my mainboard and sound chip of course kmix doesn't work, I can change the volume but it doesn't effect on output volume it look like kmix have 3 level, Mute, Low and high.
View 9 Replies View RelatedI've installed Linux quite a few times on many different computers and for some reason, I'm stumped.
I went to ubuntu.com and burned myself a boot-disk. Afterwards I went to my dad's original ME box and when I tried deleting the partition I got an error that said, "Could not change partitions, cause the disk could not be locked".
This is the third 9.10 install to do this on two different laptops, so wondering what's up...
In both cases, the goal was to leave a large chunk of unpartitioned disk after the Ubuntu partitions, for a second OS install or a filesystem Ubuntu cannot create like NTFS.
When I install with manual partitions, the system can't boot and asks for me to insert a system disk and press any key. When I reinstall telling Ubuntu to "use the entire disk" it then works.
First laptop, first try:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
First laptop, second try without the /boot partition:
Remainder of the 500GB disk is free space.
Fails to boot, "insert system disk".
"use entire disk" works perfectly.
Second laptop, first try:
Same thing, non-system disk or disk error, insert system disk.
Second try "use entire disk" is currently in progress but I expect the same to happen.
I downloaded the latest version of wubi and when I click to run i get the error "pyrun.exe - No Disk. There is no disk in the drive. insert a disk into drive DeviceHarddisk2DR2".
View 2 Replies View RelatedI replaced only my mainbord and cpu and Ubuntu 9.10 boot just fine. The only issue that I have is that my connection speed dropped from 10Mb to 3Mb. I try the connection on my laptop and it is fine 10Mb, so the problem is with the PC. What else to try before reinstall Ubuntu as a final step?
View 3 Replies View RelatedLet me know the command to check the Chipset of mainboard. (Linux5)
View 1 Replies View RelatedThe sound card is cm-6501 incorporated on a asus m2n-e sli mainboard
/usr/sbin/alsa-info.sh = http://www.alsa-project.org/db/?f=be...855e343bb23463
rpm -qa '*alsa*'
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-tools-gui-1.0.21-2.5.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-tools-1.0.21-2.5.x86_64
[Code]....
And if it is not challenging for you, in yast-hardware I have no sound/audio shortcut
I consider building a new computer using a mainboard with support for two processors. I wish to do this to improve performance of course, specifically in regards to audio production. Though, what I would like to know is if anyone has some experience with using such a hardware on an ordinary desktop system and if there are some general implications I should be aware of?
View 7 Replies View RelatedLet me know command to check the Chipset of mainboard. (RHEL-5)
View 3 Replies View RelatedWhich linux tool can find out mainboard serial number?
View 5 Replies View RelatedAfter installation of debian, using the squeeze net-installer, on a HP elitebook 6930P, i get the following error. "non-system disk or disk error"
It is right after boot process, and just when it should load grub. Grub is installed in the MBR. Windows7, is installed as well, and is not an option to remove. (Should not be the problem though).
/ is set with the bootable flag.
The installation went without any issues, and I have actually tried to install twice with the exact same thing.
I know about ubuntu. Not debian.I have installed debian 8 64bit on a notebook mainboard vga display only.During installation vga display worked. After restarting the lock up crypt hdd shows. After that debian login screen should show. It does not. Only the pointer shows.If I put the hdd in another note book, the debian login screen shows on the notebook's display. I then connect the vga display.
Then I can select settings, displays and mirror debian gui and gui will show on both displays. After restarting the notebook both displays show the debian gui. If I then put the hdd into the notebook mainboard, then the vga display will not show the debian login screen. The pointer shows. On ubuntu settings, displays, general option, I can set all displays. That option is not in debian 8. How do I get debian 8 to show the debian 8 login screen on the notebook mainboard vga display only computer?
I have windows and linux distros on my /dev/sda. I tried to install fedora 13, but after reboot I cannot boot up to any of installed systems. I'm getting: Non-System disk or disk errorreplace and striky any key when readyWhen I use ubuntu 10, boot from first hard disk, I'm able to get GNU GRUB version 1.98...nd boot up to any system. but without ubuntu in a cd-rom I'm getting this error.I tried: grub-install /dev/sdX in one of my installed linux distros, but without any success.
View 1 Replies View Relatedafter installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View Relatedi finally decided to updgrade from Hardy Heron to Lucid Lynx. for this i made a backup of my old install, then i couldnt find my Lucid CD so i used a Karmic one to partition my old ext3 to ext4. There were some errors but after trying a few times it worked. Installed Karmic, rebooted (worked fine), downloaded all updates - (did NOT reboot to let updates take effect) and upgraded to Lucid.
Everything went fine so far. Now when i try to boot into Lucid the system hangs, i've also got a windowsXP partition on there so i tried booting that, first grub tells me Error 29: Disk write error then trying again windows seems to boot but it takes much longer than it should and seems to hang.
Then i tried Karmic and Lucid LiveCD (which i found in the meantime) none of the LiveCDs make it to boot after about 20 minutes. (previously they worked fine)looking at the errors it seems to be something about the harddrive. Why the harddrive would stop the LiveCD booting is a mystery to me but the same messages appear when i select Recovery from the Grub menu so i guess the problem is related.
[Code]...
I am getting the same errors everytime I boot the server up:
Error: no such device {SOME-UUID}
Error: no suck disk
After that the system boots normally, but Im afraid ignoring this error can make my system crash in the future. I figured it was a grub error and I tried the update-grub2 command, it does detect all installed kernels no problem, but after I reboot I get the same error message.
Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.
View 9 Replies View RelatedI'm interested in buying a new hardware for my company. The old server (now 10 years old) should be replaced with a new one. Till now, I was looking on different hardware suppliers, boards and different other places. I found a Tyan board [URL]. The hardware spec is quite interesting and the board would fullfill our claims.
how both storage devices will be supported by Ubuntu or Debian??
- SATA-Controller: AMD SP5100
- SAS-Controller: LSI 1068E
I'm trying to install Fedora for the first time on my Desktop. Unfortunately, upon restart once the installation is complete I get the following error:
Code:
This is from Fedora 12 x86_64 DVD. I presume that this obviously has to do with my disk selection during partitioning, during which I deselcted the two drives that I didn't want to be part of the install and left the one that I did selected. I also selected "use entire disk". The drive had copies of both Ubuntu and Windows 7 on it, which I expect were wiped out during install.
I know that the details are sparse...but that's all I did. I'm happy to go back into the installer to retreive any necessary information that may be needed/to reinstall.
I've already formatted it 3 times, it works for 1 try then it turns read Only again. I'm looking for a fix that doesn't make me delete everything before I want to use it, because this is getting ridiculous.
Going into further detail:
Randomly when sticking the USB into the PSP the console/computer chooses that it's READ ONLY and you can't change anything in permissions.
well I went to wubi-installer, and installed Ubuntu, and I love it, I don't want to go back to windows 7, but anyways, I set Ubuntu to my D: Drive, (200GB Space) and I installed Steam (Steampowered.com) to get my games on Ubuntu. I installed all of my games, but here is a big problem, I can't figure out how to use more than 30GB on Ubuntu, it just doesn't work. I got GParted, and the D: drive is set to 195 GB (200, but Ubuntu used 5GB)
View 9 Replies View RelatedIs there a way to change the password for the whole disk encryption?
View 2 Replies View RelatedI am fully aware that these following photo's are not all required for a full understanding of my issue, but I will post them regardless. Checklist to see if my computer meets best results possible for the installation. Screenshot.jpg These photos showing here are where I plan on Installing Ubuntu
Screenshot-1.jpg
Screenshot-2.jpg
NOTE: The installation has started, but only to shortly be stopped by my error message.
Screenshot-3.jpg
This is my ERROR!!! message
Screenshot-4.jpg
No matter what I try to click on, the window simply ignores the command, regardless of the amount of times I issue the command.
We are having sixty machine super micro X7DWT-INF all are working fine all machine having two 250 GB Hard disks in SATA 0 & 1 connector operating system is scientific linux 5.4 all machine are showing hard disks as a sda,sdb,sdc etc but in 1 machine SATA Hard disks are showing as hda,hdb,etc due to this machine speed is low as compared to other machine bios settings are same as other how to change hda to sda.
View 6 Replies View RelatedI'm using two swap disks. Changing the order they are in in /etc/fstab and using "pri" in fstab doesn't have any effect. This is what it looks like /etc/fstab
#swap on other disk
UUID=90a1550c-84d6-4bde-8bc1-7c15292980f1 none swap sw,pri=-1 0 0
#swap on same disk
UUID=13b70e65-f1c3-4728-920f-9e92467d1df0 none swap sw,pri=-2 0 0
[Code]...
Its opposite of what it is in fstab, and changes to fstab have no effect.
I have ubuntu 10.4. i install rdesktop 1.7. i run this commands:
Tal is external hard drive connecting at usb in ntfs file system.
I connect to windows 7. i see the hard drive in computer and i can access to files and create new files and folders, but when i try to copy a new file to a folder he show me a error message: You need premission perform this action
Your require permission from computer's administratorn to make changes to this folder tal on my computername
Disk from Remote Desktop Connection.
I try chmode and chowne too but i read i linux forum when it ntfs is no use.
I am currently using Lucid Lynx and when I open Nautilus, the drives are labelled as follows:
200 GB Hard Diskrive Label
How can I get rid of the the 200 GB Hard Disk bit