Since I was change my mainboard and sound chip of course kmix doesn't work, I can change the volume but it doesn't effect on output volume it look like kmix have 3 level, Mute, Low and high.
View 9 RepliesI have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
I borked my perfectly good 11.2 install, while replacing a failing hard drive. I reinstalled, and now my sound doesn't work - or not quite. I get the left front channel, nothing else. Battle Duel crashes due to sound errors - or I probably wouldn't care.
[Code]....
I have a Gigabyte mainbord with an Intel IHC9 sound chip. When I configure it via YAST the test-sound plays fine, and when I issue:
sudo speaker-test -Dplug:front -c2 -l5 -twav
some friendly voice starts speaking as well.
But:
speaker-test -Dplug:front -c2 -l5 -twav
doesn't bring about anything sound-like.
My settings are stored at:
[URL]
i've recently changed my mainboard and now i got ati radeon graphic card. i had nvidia on the old board and my display was configured for nvidia.have tried oldcpu guides for ati driver install but it has failed.
View 9 Replies View RelatedThe sound card is cm-6501 incorporated on a asus m2n-e sli mainboard
/usr/sbin/alsa-info.sh = http://www.alsa-project.org/db/?f=be...855e343bb23463
rpm -qa '*alsa*'
alsa-plugins-pulse-1.0.21-3.3.x86_64
alsa-tools-gui-1.0.21-2.5.x86_64
alsa-utils-1.0.21-3.1.x86_64
alsa-tools-1.0.21-2.5.x86_64
[Code]....
And if it is not challenging for you, in yast-hardware I have no sound/audio shortcut
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
Recently I installed Ubuntu 10.10 64bit and I have a problem with it.
I have a motherboard with internal audio card as well as I have ATI 2600 card. When I just installed Ubuntu 10.10 sound via motherboard worked perfectly.
But some time later it disappeared. Actually "Output device" that represents audio card disappeared. See screenshot of the Audio Settings dialog.
I made 2 thing - most likely that one of them cause this problem:
- I tried to setup Panasonic Plasma TV as a second monitor via HDMI output of my video card (ATI 2600).
- I added maven-backports repository (new kernel or new audio driver?)
Have anybody seen this problem? Are any pointers how to fix it? If you need any additional info - let me know I'll be glad to provide it.
KMix 4.6.0 in OpenSUSE 11.4 (x86) doesn't show up channels. It only shows "Internal sound Analog stereo" So I can't set the input/output channels and the headphone channel for my soundcard. The right soundcard drivers are installed (for Creative Sound Blaster Platinum Live Drive). Earlier versions of KMix worked just fine.
[Code]...
I'm using openSUSE 11.4 KDE 4.6. In system monitor KMIX is using 100% CPU power why is this. It's a new development hasn't happened before.
View 2 Replies View RelatedI just installed 10.04 but sound doesn't work.
$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
[Code]....
I have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
View 9 Replies View RelatedI have my Acer Revo R3610 PC connected to my LCD TV through HDMI. The sound works but I cannot control the volume from Kmix. I've added the IEC958 channel to the channels in Kmix but it doesn't provide a slider for it. Only a mute. The master volume slider has no effect at all. Is there any way of controlling the volume when connected through HDMI?
I ran the alsa diagnostics script (/usr/sbin/alsa-info.sh) and uploaded it here.
Here is a quick summary of my Alsa version, sound module loaded and sound card details.
Code:
mediacentre@mediacentre:~> cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
mediacentre@mediacentre:~> cat /proc/asound/modules
0 snd_hda_intel
mediacentre@mediacentre:~> cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfae78000 irq 20
Running openSUSE 11.3, installed a month ago, and the only change I did from the default install was to update to kde 4.5 (along with usual updates).Since the upgrade, kmix doesn't start. When I click it, I see the bouncy kmix icon, and a new slot is opened on the task bar which reads 'kmix', but it shows nothing, and after a minute or so it disappears, along with the kmix bouncy icon.No error is given, so I tried to run from shell. This time when I try 'kmix' it does nothing at all (doesn't appear in 'jobs').
View 4 Replies View RelatedIm running 11.3 w/ KDE 4.6. I was using Kmix today without issue and accidentally (perhaps out of curiosity) clicked the 'close' box on the tab which presented all of the volume controls. The thing is, I cannot seem to find out how to recreate it. I seem to recall there was some option to create multiple volume control tabs, but I cannot locate.
Could someone point me in the right direction on how to recreate the tab or delete the kmix settings/config which I assume would re-create defaults?
ive just installed dosbox, my favorite dos emulator. in windows, i usually used to play doom and both sound and video worked flawlessly. when i tried running doom in dosbox in ubuntu, the game ran perfectly, but the problem is with the sound. the soundblaster sound effects stutter and are not even working at times. the soundblaster based music doesnt even work! i either blame pulse-audio or the defaut config settings.
View 1 Replies View RelatedKmix seems gone crazy,always consume 100% of one processor,during video playing with SMplayer or Kaffein,even the playing stopped,player closed,it still keep running.
I'm using 11.4 x86 KDE.
i just reported a bug to launchpad (#511562. i'm not sure if this bug is in flashplugin-installer or pulseaudio.when i use firefox or chrome for watching a flash video from videos for example, all works good. i then transfer the sound to a remote sink using sound preferences > output > internal audio analog stereo on myuser@otherhost. after this is done, the flash video halts. this is also true if i restart firefox and start a new video, already having transferred the sound. sometimes you can see the video taking huge skips forward. for example, on a 3 minute music video, i see 3-4 different frames from different places in the video. the sound is ok though! 100% reproducible and if i transfer the sound back to local speakers the video resumes and plays perfectly.
View 1 Replies View RelatedI have made a pretty sizable mistake. I was trying to figure out why my game was having sound issues when I was told to update my sound drivers. After a bit of searching, I came across this website. I downloaded and ran the script in the first link. Minor problem: I was using PulseAudio, not ALSA. Needless to say, the script didn't work. After the machine rebooted, I had no sound at all. I was planning on switching to ALSA anyway, so I found this thread and ran the following commands:
[Code]....
I just installed ubuntu, and it seems the sound doesn't work with my sound card, it is part of the Intel ICH6 family. I don't get any output at all.
View 1 Replies View Relatedwhen i tried to watch a videos video today, i noticed that i suddenly didn't have sound anymore just yesterday, it still worked fine. changing the video volume didn't do anything, so i looked at the mixer icon in the taskbar - and noticed to my surprise that it was suddenly set to mute, without me ever having touched it!
i set it back to full volume, but still nothing. i then tried to play ordinary videos in nmy video layer, but also there - no sound! so it's not limited to flash videos. the sound test in yast doesn't play any sound, either, it produced just a very short popping sound, that's all. i tried turning off pulse audio there, but that didn't change anything, so i turned it on again (i use pulse audio for sound).
next, i tried the kde control panel, but got no test sound either, just again the very short popping sound on htting the test button and nothing else. i've even tried switching the preference from xine (which i normally use) to gstreamer, but that didn't change anything either. then i did a reboot and tried things again, but no change. finally, i checked my headphones. they were plugged in properly, and plugging them out and back in again didn't do anything either.
so i'm out of ideas what i could still try. sound hardware is realtek hd onboard sound, which is identified as "hda ati sb alc889a analog". kde is 4.4 rc3, which i've been using already since over a week without problems, so i doubt that's the problem.
I have been experiencing this peculiar issue with Ubuntu 9.10. Whenever the system boots, the audio doesn't work but when I do a 'sudo alsa force-reload', the volume icon gets muted and on unmuting it the audio works. This is the information regarding the audio device I get on doing lspci
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
I'm trying to use a webtv subscribtion on ubuntu kermic, however it seems that that vlc dosnt support wmap yet, so i'm not getting any sounds on it. Does anyone have a clue on how to get this fixed, or if its even possible to get it fixed? I've tried searching guides for it without anyluck. And when i'm trying to set it to use gmplayer or totem it dosn't work either, mplayer and totem dosnt get either picture or sound.
View 5 Replies View RelatedI was just using the mic and watched it stop working suddenly. I was in the middle of a skype test call when the graphical mixer level died down to zero in the middle of the call. When the test call was played back, the first part sounded fine then the sound got lower until it became inaudible. Since then I can't get any sound from my mic in skype.
Also, the audio input level graphically shown in Sound Preferences shows no fluctuations in sound as it used to before. The input device is enabled. I tried using Sound Recorder to record some sound clips and that worked fine. So the mic is working but Sound Preferences and Skype seem to have the mic level really low. I'm not sure what else to think considering it was working perfectly a few minutes ago. I've tried restarting, but that didn't fix it either.
I just performed a fresh install of Suse 11.4. It worked great except that the network communication would cut in and out intermittently. I managed to solve the problem posting it here for other users and for future suse releases. I will give the hardware I am running, the symptoms and the fix:
Hardware
=======
Motherboard: Gigabyte GA-H67MA-UD2H-B3
Ethernet controller: Realtek RTL8111E
Default module: r8169 (run lsmod to see loaded modules)
[Code].....
1) First make sure that linux kernel source is installed in your system (yast software management)
2) ensure that gcc is installed (yast software management)
3) Download the latest linux driver for RTL8111E from the realtek website The one that I am running is the 8168 driver version 8.024.00
4) unzip the tarball (creates a directory called "r8168-x.xxx.xx")
5) As root run the autorun.sh from inside the newly created "r8168-x.xxx.xx" directory
after software update (124 packages) I cannot change sound volume and I cannot also mute it. Is there any way how to revert the changes or how to repair it?OpenSUSE version: 11.4 64bit
View 3 Replies View Related2 hours ago i installed another Mainboard on my system. When I try to boot My Ubuntu 10.10 I keep getting the following errors:
error:hd0,1 out of disk
error: couldn't read file
eroor: you neet to load kernel first
Failed to boot both default and fallback entries.
I have Ubuntu 10.04 but I installed KDE for a try(which I'm not liking by the way >_>)I can use the volume control in GNOME still and I can control it with PusleAudio but I can't use my keyboard buttons for Pulse, only KMix. In Kmix though I can't find a master channel for HDMI.
View 2 Replies View RelatedI have a webcam in my monitor (Acer H243HX). It is seen by the system (11.4):
Code:
> kernel - - - [302942.719649] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]...