Ubuntu :: Configure AMD Radeon 6670?
Jul 30, 2011configuring my AMD radeon 6670 with ubuntu. how do i use this card with ubuntu?
View 9 Replies
ADVERTISEMENT
Hardware :: Radeon HD 6670 (no KMS, Black Screen)?
May 27, 2011I'm trying to get a brand new Radeon HD 6670 running, using kernel 2.6.39 (CONFIG_DRM_RADEON_KMS=y, CONFIG_DRM_RADEON=y) and gentoo.First off a I tried to run it out of the box, but while booting the screen got black after:
Code:
Loading Turks MICROCODE
Refined TSC clocksource calibration: 2812.324 MHZ
[code]...
Ubuntu Multimedia :: How To Configure ATI Radeon HD 4650
Apr 1, 2010I recently decided to upgrade my old desktop instead of buying a new one. I figured I would go ahead and max out the specs on the motherboard while I was at it. I had a standard AGP slot and the best graphics card I could find for AGP was the Radeon HD 4650 (AGP 1GB GDDR2). So I ordered the parts and went on my merry way.I installed the card and did a fresh install of 9.10, hoping to max perform my "new" system. The card was acting kinda fishy on the live boot and I had to reboot a few times before it magically worked. I got installed etc and when I booted it worked, but it turned out performance was painful. When using Firefox the delay when scrolling down the screen was literally unbearable. No problem right, I used the restricted drivers app to go ahead and install the ATI drivers hoping that it would auto-magically fix things.
System booted but once I logged in the screen would just fill with freezing and garbage so it was impossible to get anything done. I experimented with all three options but this is what ended up being my solution. Download your ATI driver using this site: AMD Graphics Drivers & Software Just select Linux in the OS Select column.
Ubuntu Multimedia :: How To Install / Configure ATI Radeon HD 5450
Jan 5, 2011After installation of the new hardware I activated the ATI closed source driver. There is an issue with the screens
1st screen, via DVI: I cannot change to the native screen resolution
2nd screen, via VGA: The background of any window is not drawn.
Means: I can see lots of parts of other windows after moving or closing them.
Therefore I was searching for an alternative and found the hint to uninstall the ATI driver and use the open source one. After uninstall and reboot (requested by a parallel system update), some boot messages I have no screen output anymore. Means: two black screens. These are going into sleep mode after a few seconds. How can I get a running system again? Optimal would be, that I have full support for both screens. Same happens in failsave mode.
System environment:
Ubuntu 10.04
AMD Athlon 64 X2 3800+, 4G RAM, motherboard ALiveNF6G-DVI (internal graphic deactivated), ATI Radeon HD 5450
Hardware :: Configure Radeon Video Card ?
Dec 15, 2010I have installed a 9200 Radeon (the card says 9250 on it, but computer reads as 9200) on a AMD Sempron 2500+ 64 bit,Ubuntu 10.04 Gnome 2.30.2, Kernel Linux 2.6.32-26; Samsung VGA 941BW monitor.
A friend told me if I added more RAM (512mb), the card would run properly & the graphics would be stellar.
He also told me the drivers were installed.
When I did this & started the computer, before I got to my login, a box appeared, telling me my graphics were running in "Low Mode", & do I want to configure them. When I said "Yes", it told me to restart. When I did, nothing happened & the video card is still running on "low". I checked the fglrx info, and was told "command not found".
Debian :: HD 6670 Proprietary Driver Not Work Jessie / KDE
May 8, 2015Everything was working fine on Deb 7.7 with propriety driver. Then I did what I "presumed" to be an "update" through apper but it upgraded to Deb 8. The upgrade borked half way through with errors (cannot remember what they were, unfortunately I had to go out - wasn't expecting an upgrade or I'd have done it with more time).
Apper stated it had part installed stuff and trying to run update again (through apper) then had "no permissions" issues even though I entered password. After a few reboots and upgrading through recovery I "seem" to have resolved that, but might be related to this issue.
After resolving that issue I booted up and the grey GUI login screen was fine, after entering password the next screen was a colourful splash screen (with "Desktop" tab in top right corner), but it doesn't advance from that screen. No mouse, can't click or tab. Ctrl Alt Del does nothing.
The image looked like this, but with only "Desktop" in a black tab at the top right.
[URL] ....
I've never seen this screen before.
After followed this guide using recovery boot:
[URL] ....
Code: Select allapt-get purge "fglrx.*"
rm /etc/X11/xorg.conf
sudo apt-get install --reinstall xserver-xorg-core libgl1-mesa-glx:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:amd64 libgl1-mesa-dri:amd64
sudo dpkg-reconfigure xserver-xorg
My system booted fine, albeit low resolution etc.
So I tried to install proprietary again using this Debian how to: [URL] ....
Although the procedure looks the same for Deb7 as it does Deb8 (barring the source).
The same problem happened where I was stuck at the loading/splash screen after GUI login.
So I removed the proprietary drivers again and am now back in, again albeit low res like am back in he 90's. Also, that splash screen doesn't show at all now.
The driver is supposed to be fine with my setup, so is there some issue left over from the borked upgrade perhaps? Everything seems fine otherwise.
Hardware :: Configure 1600x800 Screen Resolution With Radeon 5000 Series (hd 5730)
Feb 17, 2010I have a new system with an ati mobility radeon hd 5730 chip. As far as I know, there are new drivers in the works, but aside from some articles, I haven't found anything that specifically tells me how to get them installed/working (at least, so that it works for the 5000 series of radeon chips).Has anyone had any luck with this yet? I'm just at the stage of installing, so I don't really care if it involves a different distro, etc. I've tried Ubuntu 9.10 and 10.04-alpha2, as well as Fedora 12 (from the live CD) and so far no luck.At the moment, all I care about is getting the native 1600x800 working for my screen. I haven't a clue how do do that...it seems like I might be able to do this using xrandr, but I don't know how to create a mode properly.
View 6 Replies View RelatedFedora Hardware :: Replacing Radeon 9550 With Radeon X1300/X1550 - Low FPS
Apr 4, 2010I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
Hardware :: S-video VGA Compatible Controller - ATI Technologies Inc Radeon Mobility M7 LW - Radeon
May 24, 2009I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
Ubuntu Multimedia :: Screen After Sleep On Radeon Mobility M7 LW [Radeon Mobility 7500]?
Dec 20, 2010When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
Ubuntu :: Bash: ./configure: No Such File Or Directory When Run The Command ./configure --prefix=/usr
Apr 4, 2010I am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedUbuntu Installation :: Configure Autoclicker In The Terminal - "bash: ./configure: No Such File Or Directory?
Mar 19, 2011I found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
OpenSUSE :: Configure / Syncing The Conduits Through The "Configure Kpilot" Menu Item
Feb 8, 2010kpilot worked just fine with my Palm Tungsten T3 on OpenSuse 10.3. I recently upgraded to 11.2 and have had numerous problems. It took me a while to get the hardware talking (documented in another thread), but now the sync is proving to be problematic. A hotsync happens - and I can also sync fully with jpilot, but the sync isn't going anywhere. I'm hoping to sync with kontact, but it's impossible to tell as kpilot hangs whenever I try to configure the conduits through the "Configure kpilot" menu item. When syncing, the log complains of missing conduits:
Version: KPilot 5.3.0 (KDE 4.3.0)
Version: pilot-link 0.12.3
Version: KDE 4.3.1 (KDE 4.3.1) "release 6"
Version: Qt 4.5.3
[Code]....
General :: Installing Hudson In Centos 5 - Manage Hudson By Using Configure System And Configure Options?
Aug 9, 2011I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
Ubuntu :: No 5.1 With ATI Radeon 5770 ?
Sep 4, 2010I've been trying to get my Sound set to 5.1 surround for two weeks now and for some reason Ubuntu only shows Digital Stereo.
ATI Radeon 5770
Ubuntu 64bit
When I go to System > Preferences > Sound the Output tab only gives me the option of Digital Stereo.
Code:
Ubuntu :: Xfx Radeon Card Compatibility?
Apr 21, 2010I'm looking at buying this card and I'm wondering if anyone here has had an issue using this card with Ubuntu(currently on 9.10)
[URL]
Ubuntu :: Overclock Using An ATI Radeon 5770?
May 19, 2010Does anyone know of a similar easy to use interface for over-clocking with ATI cards?
I found this one that works with nvidia but haven't had much luck finding any others:
http://www.econowics.com/linux/298/t...-ubuntu-linux/
Ubuntu :: GLXgears Getting Low FPS On A Radeon 5770 ?
Jun 15, 2010The following is my system:
AMD Athlon II x4 620 2.6Ghz
4GB DDR2-800 DC
Radeon HD 5770 1gb
Ubuntu 10.4 LTS, latest proprietary drivers.
On GLXGears, I only get 12k fps. This seems very low, especially considering the fact that my Acer Aspire One laptop gets 1-5k scores on a POS Intel GMA 950.
Ubuntu :: Configuring ATI Radeon HD 5450
Jul 12, 2010Just purchased and installed an ATI Radeon HD 5450 graphics card and installed the proprietary drivers via System > Administration > Hardware Drivers. After rebooting the machine X would not load so I restarted into recovery and removed my xorg.conf. At this point I could restart normally and the machine would let me into X. I went to System > Preferences > ATI Catalyst Control Center to try and configure the card.
I receive the following message:
There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI Driver is not functioning properly. Please install the ATI driver appropriate for your ATI hardware, or configure using aticonfig.
So, I did just that, I restored my backup xorg.conf (configured for nvidia card) and executed 'sudo aticonfig --initial', it made the proper changes and additions to the configuration file and this is what it looks like [view xorg.conf]. I then restarted the machine and X still refuses to begin [view Xorg.0.log]. Again, I went in removed the xorg.conf file and the machine will load normally. I tried running fglrxinfo to try and see if the card was properly installed and it just threw a segmentation fault.
Ubuntu :: ATI Radeon HD 5670 Mouse Lag?
Jul 23, 2010I have the ATI Radeon HD 5670. I recently wiped my system, doing a full install (not update) to 10.04 LTS. Everything works fine except for the mouse.
I have about 30 seconds of lag-free mouse movement, and after that, the mouse slows to a crawl. I then have to wait for about a minute and then the mouse becomes usable again. (If i continue to use the mouse, it stays unusable, until i give it a rest)
Current drivers in use are the FGLRX from the Ubuntu restricted drivers.
Does anyone know how to fix it? or what causes it? Let me know what other information you need and I will do my best to provide it.
I just added 2 more hard-drives to the system. Before this I did not have a "swap" space. I also replaced the mouse. The problem seems to have gone away.
Ubuntu Installation :: SOL W/ATI Radeon 9550 & Ubu 10.04?
Sep 1, 2010From looking at beaucoup posts, it appears I'm SOL trying to use the Linux drivers provided by AMD (See url.terminal command line "sh ./ati-driver-installer-9.2-x86.x86_64.run". Since I keep getting an error message saying the file can't be opened either as root or using sudo I guess there's no reason to continue.Anyway, I have my PC displaying on a CRT thru a s-video connection. The screen is overscanned, that is, part of both the left and right sides are not visible. That is why I wanted to load the Radeon drivers & Catalyst Control Center so I could shrink the screen width.Question: Should I keep trying to open the ATI file? SHould I install the Open Source ATI driver? Should I give up and try to find a nVidia AGP 8X card?
View 1 Replies View RelatedUbuntu :: 8.10 And 10.10 With ATI Radeon Xpress 1100?
Dec 1, 2010I have an Aspire 5100 with ATI Radeon Xpress 1100 and have been happily running Ubuntu 8.10 until now when support has ended. I continued with 8.10 because the graphics have been fine with my system.I also have 10.10 installed and apart from the graphics, I would have no problem changing/upgrading.The problem is the glare, after a while it is very hard to work on.Is there anything I can do that's not to technical to reduce the glare.
View 5 Replies View RelatedUbuntu :: Getting To Work With ATI Radeon 6850?
Dec 4, 2010I've been having problems getting my Ubuntu to work with ATI Radeon 6850. I've had Kubuntu for some time now, and it worked fine on my old card (nVidia 9400 GT). When I changed cards, the boot screen didn't display correctly, and after that I just got a black screen that wasn't responding to anything. I tried reinstalling the whole OS, but even the installation's GUI wouldn't load up.
Next I tired regular Ubuntu. The installation went fine, but the graphic settings were low, as you would expect from a system with no graphics driver. I installed the driver the system automatically suggests but after installing and rebooting I ran into the exact same problem I did with Kubuntu - black screen, no response. I got the notion that this card isn't fully supported yet, but I read other posts saying people got much further with this card then I did. Is there another driver I should be installing?
Ubuntu :: ATI Radeon X1050 Driver
Jan 28, 2010I'm running Mint Helena.The problem is that i can'd find a driver for my ti radeon x1050 card. I've tried the mesa driver and the other things similar to it but with no result.
View 1 Replies View RelatedHardware :: ATI Radeon 9000 On Ubuntu?
Jul 22, 2010I'm having trouble getting this to work, everytime i pop it into the motherboard and start my computer it beeps at me and won't start, i'm thinking it probably just won't work but does anyone have any ideas that MIGHT make it work? i've downloaded the driver package off the ATI website and it doesnt seem to install anything. maybe possibly just hardware conflict??
View 7 Replies View RelatedUbuntu Installation :: Installation Of Tar.gz - Get To The ./configure Step It Says "bash: ./configure: No Such File Or Directory"?
Jun 5, 2011I want to install a program from this website http:[url].... and i download the option " hydra-6.3-src.tar.gz".i tried following the instructions on this page: https:[url].... but when i get to the ./configure step it says "bash: ./configure: No such file or directory"
View 9 Replies View RelatedUbuntu Installation :: No Display After Upgrade To 9.10 (ATI Radeon)
Jan 23, 2010I upgraded my HP Elitebook 6930p from 9.04 to 9.10. When X starts the display shows random lines. I can boot into "recover" mode from GRUB and get the command prompt. 9.04 worked fine so I'm pretty sure it's not the video card. The video card is ATI Radeon HD 3400.
View 4 Replies View RelatedUbuntu Installation :: ATI Radeon 7500 Series With 9.10?
Feb 6, 2010So far everyone thats tried to help has mentioned modifying xorg.conf On this installation, there is no xorg.conf file. Anyone with video troubleshooting experience with ubuntu 9.10 ? I cannot even get 800x600 16 colors displayed correctly
View 2 Replies View RelatedUbuntu :: How To Install ATI Radeon X700 Driver
Feb 20, 2010I just downloaded ATI Radeon x700 driver from Quote:[URL]..the file name is
Quote:
ati-driver-installer-9-3-x86.x86_64.run I gave permission as Executing file as program. I run as sudo from terminal but I get this error Quote: Error: ./default_policy.sh does not support version default:v2:i686:lib::none:2.6.31-20-generic; make sure that the version is being correctly set by --iscurrentdistro
Ubuntu Multimedia :: ATI Radeon 5750 Drivers?
Apr 18, 2010I just installed Ubuntu 64 bit (I had 32 bit before) and I want to get my graphics card working. I have an ATI Radeon 5750 hd card. I tried to use the proprietary drivers from "hardware drivers" but I get a watermark in the bottom right hand corner of the screen and the resolution is terrible. Also, the whole screen seems to be vibrating, which kills the eyes, so I got rid of that driver.
I also tried to download and install the driver from ATI website [URL]... but ubuntu couldn't open the pakage. I gave me some error message about the "encoding text" or something like that. So how (if it's possible) do I get my video card working so that I can use compiz and run 1080 resolution? I have been through tons of threads but none of them helped my any.
