Ubuntu :: Getting To Work With ATI Radeon 6850?
Dec 4, 2010
I've been having problems getting my Ubuntu to work with ATI Radeon 6850. I've had Kubuntu for some time now, and it worked fine on my old card (nVidia 9400 GT). When I changed cards, the boot screen didn't display correctly, and after that I just got a black screen that wasn't responding to anything. I tried reinstalling the whole OS, but even the installation's GUI wouldn't load up.
Next I tired regular Ubuntu. The installation went fine, but the graphic settings were low, as you would expect from a system with no graphics driver. I installed the driver the system automatically suggests but after installing and rebooting I ran into the exact same problem I did with Kubuntu - black screen, no response. I got the notion that this card isn't fully supported yet, but I read other posts saying people got much further with this card then I did. Is there another driver I should be installing?
View 6 Replies
ADVERTISEMENT
Feb 1, 2011
I don't know what to do. When I install ATI Catalyst, choosing it gives me an error message, and when I activate proprietary drivers, my screen becomes a glitched mess. How do I make Ubuntu 10.10 work with my ATI Radeon HD 6850?
View 9 Replies
View Related
Jun 26, 2011
Ive been a ubuntu user for about 3 years now, but lately I wanted to find something new. Ubuntu is beginning to feel less and less like "linux". So anyway I am having a bit of trouble getting my gfx card working in suse. I have a AMD Radeon HD 6850. In ubuntu I just get a popup says that restricted drives are available, and i click to install them. but In suse im not quite sure what to do. I believe I have the drives installed correctly, but I get a AMD watermark in the bottom right corner of my screen saying my hardware is unsupported.
What is the easiest way to get the latest working drivers for my video card? and keep them updated properly with each kernel update like in ubuntu? btw, im running openSUSE 11.4 64-bit.
I know this has been asked before, but im a complete noob to suse and I cant seem to find a answer that im able to understand.Other than this issue with my graphics driver I love everything else.
View 5 Replies
View Related
May 21, 2011
Upgraded to Natty,just after I got this new GPU - ATi Radeon HD 6850.
I cannot activate the driver for it, I have also tried to download and install from AMD but it didn't work. I cannot open the catalyst control centre that is already installed.
When I try I get this.
"system error: Install archives() failed"
When I open the software update application I get this
"Items cannot be installed or removed until the package catalogue is repaired. Do you want to repair it now?"
So click yes. The process is:
"Repairing broken deps and states "Finished" code...
I have tried to use this guide https://wiki.ubuntu.com/X/Troublesho...thRadeonDriver
to remove the files but it won't let me remove.
View 1 Replies
View Related
Feb 9, 2011
The AMD tool ATI Catalyst does not provide Linux support for the ATI HD 6850. Running the tool allows the monitor to display in 1080P. However, it results in a watermark stating the hardware isn't supported.
Is there an open source driver that will support this card?
Can the Windows driver be co-opted for Linux?
When will there be an open source driver to support video cards?
View 7 Replies
View Related
Jan 18, 2010
I received an amber light warning "IB110 - SBE Log Disabled." I've learned from Red Hat documentation that this is "for information only". Where can I find a better explanation of this warning? Also, what is the SBE Log, how can I enable it, and where can I view it? It doesn't seem to be in /var
View 1 Replies
View Related
May 2, 2010
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
View 1 Replies
View Related
May 23, 2010
I have an ATI radeon x1300 graphics card on my Toshiba Satellite A100 P542 laptop. I am new to ubuntu. On installation, I was pleased with the mac feel as I use mac at my home. I just cant get the card to work. In the hardware options, my card isn't displayed in proprietary thingy.
I later realised that my graphic driver is no longer supported by ATI and there are no official drivers. So I tried all the alternatives available in Ubuntu software centre. I currently have everything related to ATI, fglrx, xorg etc installed. But seems like all these things are of no use, as my graphics driver still isn't recognized and I cant use Compiz fusion. Leave alone compiz fusion I cannot run good quality videos. The screen gets sluggish when I do that.
View 9 Replies
View Related
Mar 1, 2011
It has ATI Radeon HD 3000 Graphics. Will that work with Fedora 14? Will I need to install a driver to get it to work? If so, where would I download that driver?
View 4 Replies
View Related
May 28, 2010
I currently have a Hp NC8430 laptop running 10.04 and this one is amazing and love it, but my video card wont allow me to hook up an external monitor. I can enable compiz, but nothing else. When i install the ATI driver from the website for catalyst it allows the external monitor to work, but now compiz wont work? I dont understand what i am doing wrong and would like if someone could help me. My Video car is a ATI mobility Radeon x1600 and is not supported anymore which sucks so if anyone knows of where to get opensource drivers that would be awesome or a way to set this up. I would hate to have to use another distro, but i need external support.
View 8 Replies
View Related
Aug 3, 2010
A friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies
View Related
Dec 31, 2010
I am running a 2.7Gh with 2G ram with an ATI X1300/1550 Radeon Card and running with dual monitors. I had the monitors functioning in Linux Mint but it was an older driver version and it was slow. I was reading about the Ubuntu Maverick 32bit and fresh installed it I have just installed Ubuntu 10.10 Maverick 32bit. Everything that I have found on here concerning ATI and fglxr has not worked.
View 7 Replies
View Related
Jan 20, 2011
The 3D acceleration of my Radeon 4670 doesn't work and I want to fix it. I have installed the drivers like in the sticky explained and also tried it one time with disabled AIXGL and Composite. I use Fedora 13.
Here are my "xorg.conf", the "LIBGL_DEBUG=verbose glxinfo" and my "Xorg.log"
xorg.conf:
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection .....
Xorg.log:
But it seems like it can't be opened...
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 30.323] (EE) fglrx(0): Cannot shmat() low memory
[ 30.323] (EE) fglrx(0): em) error: Permission denied
[ 31.984] (EE) AIGLX error: dlopen of fglrx_dri.so failed
[ 31.984] (EE) AIGLX: reverting to software rendering
View 2 Replies
View Related
Dec 27, 2010
I recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.
I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "
Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.
Here are some screenshots:
[URL]
View 9 Replies
View Related
Apr 1, 2014
I'm using Debian Jessie. All the firmware packages are properly installed, and so are the radeon free driver packages.
However, Gallium falls back to llvmpipe, which from what I understand is a software rasterizer and not actually hardware rendering.
Everything works fine except some specific things like KDE's cube animation, which says it can't be enabled because it requires OpenGL.
How do I get Debian to run Gallium properly?
I attached some relevant info...
glxinfo | grep -i opengl
View 14 Replies
View Related
Aug 10, 2009
I've loaded Fedora and must say what a nice OS! But I'm having some issues getting the video working correctly so let me jump right into the issue. The video is very garbled and hard to read. can't seem to find a way to correct what would appear to be a driver issue. Here are a list of things tried:
- display works fine with Ubuntu
- display is clear but is chopped off when using an external monitor from onboard vga slot
The video card is an ATI radeon and the linux drivers from the ATI site don't work with the new images that are out yet.
View 3 Replies
View Related
Dec 14, 2010
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
View 1 Replies
View Related
Apr 4, 2010
I replaced an ATI Radeon 9550 with a Radeon X1300/X1550, in hopes of better performance.
My System: P4@3GHz, 1.5Gb RAM, Fedora 12, kernel 2.6.32.10-90.fc12.
Faults: Screen refresh is extremely low. Glxgears outputs 25 FPS. Dragging windows around is sometimes really slow.
What I did so far, in hope of fixing it:
1. Installed 'system-config-display', for providing an xorg.conf
2. Did: yum --enablerepo=rawhide update mesa-dri-drivers-experimental mesa*, fixing this, but to no avail...
I cannot find any errors in the log...I don't know what to do...
I am posting my Xorg.conf, Xorg.0.log and Glxinfo through links to pastebin.com
POST UPDATE:
When running GlxGears, I get a bit of motion, and then the gears freeze for 1 second. And this goes on and on. But...if I move the mouse around, I get 1100FPS!
Now I messed a bit with xorg.conf and the "SWCursor" Option, but the above happens when this option is on "true". On "false" there is no 1100FPS, only the freezing loop...
View 1 Replies
View Related
May 24, 2009
I been searching for months on how to get the s-video to work on my pci VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500] card. I found a site with instructions.
This is how I got it to work.
I install Debian 5.0 Lenny Desktop
added the Driver "radeon" to my /etc/X11/xorg.conf file
This work and I was able to use my tv as a monitor however when I try to play a video file from totem or vlc all I could get was audio with no video; These files work and played fine in the CRT monitor.
View 2 Replies
View Related
Dec 20, 2010
When I put my laptop, a Presario X1000 to sleep that uses Radeon Mobility M7 LW [Radeon Mobility 7500], when it comes back up, I get just black and white "nosie" on the screen.
Even after I do cntr+alt+F1 and then cntrl+alt+F7 it still doesn't appear to restore the regular screen.
View 3 Replies
View Related
Sep 4, 2010
I've been trying to get my Sound set to 5.1 surround for two weeks now and for some reason Ubuntu only shows Digital Stereo.
ATI Radeon 5770
Ubuntu 64bit
When I go to System > Preferences > Sound the Output tab only gives me the option of Digital Stereo.
Code:
View 4 Replies
View Related
Apr 21, 2010
I'm looking at buying this card and I'm wondering if anyone here has had an issue using this card with Ubuntu(currently on 9.10)
[URL]
View 3 Replies
View Related
May 19, 2010
Does anyone know of a similar easy to use interface for over-clocking with ATI cards?
I found this one that works with nvidia but haven't had much luck finding any others:
http://www.econowics.com/linux/298/t...-ubuntu-linux/
View 6 Replies
View Related
Jun 15, 2010
The following is my system:
AMD Athlon II x4 620 2.6Ghz
4GB DDR2-800 DC
Radeon HD 5770 1gb
Ubuntu 10.4 LTS, latest proprietary drivers.
On GLXGears, I only get 12k fps. This seems very low, especially considering the fact that my Acer Aspire One laptop gets 1-5k scores on a POS Intel GMA 950.
View 1 Replies
View Related
Jul 12, 2010
Just purchased and installed an ATI Radeon HD 5450 graphics card and installed the proprietary drivers via System > Administration > Hardware Drivers. After rebooting the machine X would not load so I restarted into recovery and removed my xorg.conf. At this point I could restart normally and the machine would let me into X. I went to System > Preferences > ATI Catalyst Control Center to try and configure the card.
I receive the following message:
There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI Driver is not functioning properly. Please install the ATI driver appropriate for your ATI hardware, or configure using aticonfig.
So, I did just that, I restored my backup xorg.conf (configured for nvidia card) and executed 'sudo aticonfig --initial', it made the proper changes and additions to the configuration file and this is what it looks like [view xorg.conf]. I then restarted the machine and X still refuses to begin [view Xorg.0.log]. Again, I went in removed the xorg.conf file and the machine will load normally. I tried running fglrxinfo to try and see if the card was properly installed and it just threw a segmentation fault.
View 1 Replies
View Related
Jul 23, 2010
I have the ATI Radeon HD 5670. I recently wiped my system, doing a full install (not update) to 10.04 LTS. Everything works fine except for the mouse.
I have about 30 seconds of lag-free mouse movement, and after that, the mouse slows to a crawl. I then have to wait for about a minute and then the mouse becomes usable again. (If i continue to use the mouse, it stays unusable, until i give it a rest)
Current drivers in use are the FGLRX from the Ubuntu restricted drivers.
Does anyone know how to fix it? or what causes it? Let me know what other information you need and I will do my best to provide it.
I just added 2 more hard-drives to the system. Before this I did not have a "swap" space. I also replaced the mouse. The problem seems to have gone away.
View 1 Replies
View Related
Sep 1, 2010
From looking at beaucoup posts, it appears I'm SOL trying to use the Linux drivers provided by AMD (See url.terminal command line "sh ./ati-driver-installer-9.2-x86.x86_64.run". Since I keep getting an error message saying the file can't be opened either as root or using sudo I guess there's no reason to continue.Anyway, I have my PC displaying on a CRT thru a s-video connection. The screen is overscanned, that is, part of both the left and right sides are not visible. That is why I wanted to load the Radeon drivers & Catalyst Control Center so I could shrink the screen width.Question: Should I keep trying to open the ATI file? SHould I install the Open Source ATI driver? Should I give up and try to find a nVidia AGP 8X card?
View 1 Replies
View Related
Dec 1, 2010
I have an Aspire 5100 with ATI Radeon Xpress 1100 and have been happily running Ubuntu 8.10 until now when support has ended. I continued with 8.10 because the graphics have been fine with my system.I also have 10.10 installed and apart from the graphics, I would have no problem changing/upgrading.The problem is the glare, after a while it is very hard to work on.Is there anything I can do that's not to technical to reduce the glare.
View 5 Replies
View Related
Jul 30, 2011
configuring my AMD radeon 6670 with ubuntu. how do i use this card with ubuntu?
View 9 Replies
View Related
Jan 28, 2010
I'm running Mint Helena.The problem is that i can'd find a driver for my ti radeon x1050 card. I've tried the mesa driver and the other things similar to it but with no result.
View 1 Replies
View Related
