my computer shows no video not even the bios. my conpound from the heat skin ran? i can send the mother board back look at the pic and if this has any thing to do whith why i have no video.
View 5 Replies
When I enter my Bios it says I have 1 Gigish and in ubuntu 243.1 MiB. Things might be alot faster with that ram working. I have a dell E210882 Motherboard.
Total used free shared buffers cached
Mem: 243 237 5 0 6 47
-/+ buffers/cache: 183 59
Swap: 708 41 667
i have just put in my new 320gb seagate hdd and it shows in bios, however upon booting from USB it does not show on the OS, nor does it show on the installer does anyone have any idea what could cause this or how to sort it?
View 5 Replies View RelatedI recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedI come bearing a question that I hope I can get some info on. Here's the situation: I installed Ubuntu 10.04 Netbook Remix on my Acer Aspire One (didn't want it, but got it for free). I installed and am dual booting it with windows 7 basic. Both worked fine until this morning when the laptop ran out of battery and shut down.Now, on start up, the BIOS screen flashes, and its not the same BIOS screen, but I can't tell what it says, its moving too fast, the laptop then restarts. This problem may be bigger than the linux part of it
View 9 Replies View RelatedI want to be able to access an old pc at home from any computer but I don't want to leave the computer on all the time (I won't use it regularly and I don't believe in wasting energy just cause I can). I've heard that some bioses have wake-on-LAN but I have no other machine on the LAN that will be left on (apparently it's impossible to wake a computer from off the LAN???) so my solution is to buy a raspberry pi (perhaps there is something cheaper/better??) and leave that on that I can ssh to from anywhere and then wake my pc from there. Unfortunately my bios doesn't have a wake-on-lan function and so I'm hoping that I can update my bios to a version that has a wake-on-lan option (perhaps there is a better way?).
oli@deb-serv:~$ lsb_release -a
No LSB modules are available.
Distributor ID:Debian
Description:Debian GNU/Linux 8.2 (jessie)
Release:8.2
Codename:jessie
[Code] ....
So I've started to try and find a new bios to update. I think I need one of these: [URL]
When I start my computer sometimes I get an error that my floppy drive isn't working and the boot process is halted. So I disabled the floppy disk seek. But Once in a while (sometimes almost every time I start) the BIOS settings are reset and I have to disable floppy disk seek and reorder boot device list again. I have checked the battery and it's fine. What else can be the problem?
View 14 Replies View Relatedeverex gPC2 tc2512 they went under
ubuntu 804 hardy
no windows
single boot
my onboard video is going bad.i have a radeon 9250 pci 256mb v/d/vo card.i would like to install before the onboard goes all the way out.how and what all do i need to do.what do i look for and change in the bios.yes it may be the power pack but if not i can not install the video card later
I posted the same problem before but did not get answers, I guess due to the unattractive title. I have two Ubuntu machines, both desktop version with a server installed on top. They are both on the same network. It seems that when I restart the remote computer, I can ssh to it fine for a while but then I get the following:
Read from remote host: Connection reset by peer lost connection.
I installed Puppy Linux on a partition on an older 2000-era computer. The other partition had Windows ME, which crashed and burned recently. Lately, the computer has started to open GRUB very slowly. It is also slow to boot Puppy Linux from there. I reinstalled GRUB, to no avail. I decided that the problem was probably a slow BIOS, but I'm not sure. Does anyone know of another possible problem, or of a good boot-disk BIOS diagnostic tool? I tried using a couple of the tools on the Ultimate Boot Disk, but they all got hung up, displaying: - InitDisk as the last line in the sequence.
View 3 Replies View RelatedI've attached an example.As you can see,fgl_glxgears window is under the chrome window(look at the title bars), but you can still see the gears.The same thing happens with video in VLC.I'm using 11.04. This happens with or without compiz. I'm using the latest ati video drivers from AMD's site (11.5).
View 2 Replies View RelatedI connect my laptop to my TV (1280 X 720) and mirror the images, having the same exact display on both the computer and the television. I tried doing this with another laptop (core2duo with nvidia gforce 9600) and the tv will show the desktop (not the full thing) while the computer remains the same. This is not usable. I tried using the nvidia settings application but to no avail.
View 1 Replies View RelatedI've had this problem for ages and decided to try to tackle it. It occasionally also occurs on my laptop but only intermittently. The video on the second screen seems to go haywire. On boot, it doesn't display the background image. It only will display a fading black and gray picture. Then anything that is put on the screen is captured like a screen shot on the background. It is just hard to know if things were closed
View 1 Replies View RelatedI'm having a hard time installing Ubuntu 10.10 (32bits). I load the CD and everything's ok throughout the installing procedure, but when the installation is over and it says it's gonna reboot it doesn't do it!
The screen resembles a terminal with a message like "the computer is going to reboot NOW!" but it could stay like that for hours. The keyboard is locked so I can't reboot by commands, and if I press CTRL+ALT+DEL it just reprints the same message. Therefore I'm forced to turn off my computer manually.
After that, the Ubuntu desktop doesn't load. The screen shows a terminal asking for my username and password to access the computer. No graphics at all.
i started the installation programme and it went through a couple of options then says it has to restart the laptop when i restarted i got this message before the bios screen and then the computer does nothing
" Booting GRLDR.....
Turning on gate a 20 .... Success
Srating cmain() .... _"
I have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View RelatedThere is an option to play ..... video in totem. But i am unable to play any video. Error shows, "Could not open location; you might not have permission to open the file.". I searched google, few suggestions are patches for ......py file, but there is no file named ......py in /usr/lib/totem/plugins/...../ folder.
View 2 Replies View Relatedmodinfo -l shows a ton of different video drivers, from matrox to ATI. Are all these drivers currently loaded my kernel, and is it ok to disable all but nvidiafb (since my system if 100% nvidia)?
View 2 Replies View RelatedI recently tried out recordMyDesktop (not the GTK+ frontend, just the CLI program, I wanted to Keep It Simple this time ), and found that the videos it records/encodes show massive motion-smearing artifacts when played back. This is without the "--on-the-fly-encoding" option; with it, the video looks fine (i.e. has no artifacts other than the typical ones found in any compressed video), but it plays back too quickly (the time-step between frames is too high, thus making everything go too fast when the video is played back, even though the frame rate is low). Here's a screenshot of the video playing, showing what the artifacts look like (they're nasty!).
I've searched Google and LQ about this problem to no avail: either there were no relevant results, or it was just a post on a different forum asking basically the same question, but with no answer. So apparently this problem is either really rare, or it's something specific to my configuration, and mine alone (highly unlikely).
System specs:
CPU: Intel� Core� i5 430M @ 2.27 GHz
GPU: NVIDIA GeForce� 310M w/ 512 MiB VRAM
RAM: 4 GiB
Command used to record:
Code:
recordmydesktop --fps 30 --no-sound --no-frame --overwrite -o /home/mrcode/Videos/capture.ogv
I've tried different options, such as --quick-subsampling, as well as tweaking the video quality and bitrate settings (--v_quality and --v_bitrate), all of which did nothing to change/get rid of the artifacts.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I had switched over from Windows to Ubuntu and got rid of windows completely but still had the recovery partition and deleted it. I then tried to add that space to another partition, "Media." For whatever reason it deleted the "Media" partition so I used TestDisk to restore it. I did something wrong and when I rebooted my computer it would not boot so I used my LiveCD to check whats wrong and it had deleted all of my partitions and Ubuntu was nowhere to be found. So I used TestDisk again to recover them, this time it was successful. when I start my computer it does not boot into Ubuntu it just shows a black screen with the white underscore ("_") flashing in the corner. I'm not sure but I don't think it is booting into the correct partition, I think it would be trying to boot the first partition, /dev/sda1, rather than /dev/sda3. If this is the problem how could I fix it? I got all the boot loader information, here it is:
[code]...
Fedora 14 xfce
HP Mini 210
I am looking to buy some memory for my netbook. Currently I have 1 GB of DDR3 memory. However, the specification says that 2 GB of memory is the max. However, when I do the following it says that 4GB is the max:
[Code].....
I am using "ping" on 2 computers on the same wifi network.One of them shows a bigger delay than the other consistently.I am trying to find out what may be the problem.. Can someone suggesta way to investigate this issue or isolate the problem?Both of them sending "ping" at almost the same time.First laptop (much newer laptop model)
Code:
PING www.l.google.com (64.233.181.104): 56 data bytes
64 bytes from 64.233.181.104: icmp_seq=0 ttl=48 time=1011 ms
[code]...
I have a Asus UX30 with an Intel GMA 4500MHD laptop with ubuntu, working with no problems except that when I'm watching some video it often freezes. The screen turns black and the only way to get it some where is to shutdown in the power button. Is there any special reason for computer suddenly freezes
View 2 Replies View RelatedI did searched you tube but my results were not great.I have 2 books on KernelProgramming.I feel I need if some where I can get a video tutorial which can help me to understand how to develop a Linux Device driver that will be great.I had a look at Greg Kroah Hartmans video lecture of developing patches on ......I have been reading books and a lot of stuff.So I wish if I could get a video lecture that would be better
View 1 Replies View RelatedI have one laptop connected to my tv. It has all the videos on it. ther laptop(actually a netbook) that I have set up to do light browsing on. Both are running ubuntu 9.10. I would to be able to remotely control vlc running on the laptop connected to the tv from the netbook. I have been searching for a while and have found hints that this is possible, but everything either refers to streaming from one machine to another or doesn't give enough examples to figure it out. I have tried enabling the http interface, but I can't access this from another computer.
View 9 Replies View RelatedI need to record full screen video on my computer. The recorder must be able to record 3D accelerated games with minimal lag.
View 9 Replies View RelatedBy default I believe alt+click moves my window around. Except, I'm trying to use alt+click in my video game in a virtual computer and it won't let me do it. I can do click, or hold alt, but I can't alt+click in my game.
How would I disable the alt+click move window so I can use alt+click in my game?
I want to do a stop-motion but I cannot find a program that has all the option I want and that is useable for me. I tried with Kdenlive that has all the option I want, but when I want to see the preview of my video, it lagged at every new image.Is there a format, a way to configure kdenlive or something else that would make it easier for my computer. Or even another program that do what I want but is less demanding then Kdenlive.All I want is to put picture one after the other, adjust the time they appear and add some text and sound.
View 1 Replies View Related
