Ubuntu :: Video Display On Second Screen Shows Whatever Was Last There Even After Closed?
Dec 20, 2010
I've had this problem for ages and decided to try to tackle it. It occasionally also occurs on my laptop but only intermittently. The video on the second screen seems to go haywire. On boot, it doesn't display the background image. It only will display a fading black and gray picture. Then anything that is put on the screen is captured like a screen shot on the background. It is just hard to know if things were closed
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports PORT STATE SERVICE 21/tcp open ftp
I tried installing 10.04 via Wubi on a friend's notebook and have hit problems with the display. The installation seemed to proceed OK (took ages to download / install - left it running overnight) until it came to boot to Ubuntu. The GRUB menu appears OK, but choosing Ubuntu leads to a blank screen with some icons at the bottom, which is displayed for a few seconds, then the (login?) screen just shows rolling display, like an out-of-tune analogue TV. I suspect that I need a graphics driver or something? The notebook is a logiQ notebook, with 128MB SiS Mirage-3 graphics.
nmap is showing a port as closed. I have the firewall stopped on both hosts.It shows as closed on localhost as well.The process that's listening to that port is not started from xinetd so i doubt hosts.allow/deny is the issue.I can't help but feel that I'm forgetting some other access control mechanism.Both hosts are RHEl5.4
I use natty 64 bit. I installed a HD 4870. Installed the drivers according to instruction on [URL]. I ran aticonfig --initial. Still I get "Cannot Display This video Mode" after the grub screen, during boot up. Monitor preferences applet doesn't seem to work, either - it won't detect the monitor parameters EDID thing.
When I try to open the Catalyst Control Centre I get: p, li { white-space: pre-wrap; } "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following. No ATI graphics driver is installed, or the ATI driver is not functioning properly. Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig."
Here are chunks of xorg log (I cut the non video bits). (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [210.874] (II) LoadModule: "extmod" [210.875] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [210.875] (II) Module extmod: vendor="X.Org Foundation" [210.875] compiled for 1.10.1, module version = 1.0.0 [210.875] Module class: X.Org Server Extension [210.875] ABI class: X.Org Server Extension, version 5.0 .....
I did searched you tube but my results were not great.I have 2 books on KernelProgramming.I feel I need if some where I can get a video tutorial which can help me to understand how to develop a Linux Device driver that will be great.I had a look at Greg Kroah Hartmans video lecture of developing patches on ......I have been reading books and a lot of stuff.So I wish if I could get a video lecture that would be better
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
I like to play videos from my laptop on my tv in my bedroom using an hdmi cable. I used it in windows all the time. I have gotten Ubuntu configured to play the video and sound but I cant figure out a way to keep playing when I close the lid. Every time I do that it goes black. Also when I re-open it the laptop display is blank as well and will not come back on.
Under the power option when lid closed all it offers is
I am rather a new user of ubuntu.. I tried playing songs and it played properly after it installed the necessary softwares.. But when I tried playing videos, the video clip opened and then closed again.
If I close my laptop lid for more than a few seconds, my screen will become completely unresponsive, aside from the cursor. Any idea what could be causing this?
I am running karmic on a MBP 5,2. When I close the lid, nothing happens. The screen does not blank, machine does not sleep... nothing. I thought I performed all the steps in the sticky, and I didn't see anything special regarding power management. The power management tool does not list any settings for lid closed.
I just installed Ubuntu 9.10 CLI with Openbox as the WM on my Dell laptop. I installed gnome-power-manager because I like to suspend my laptop when the lid is closed. When the close the lid and reopen it, the screen is black and the computer never suspends. This happens regardless of whether or not gnome-power-manger is running is the background.
I have Ubuntu 10.10 installed on a laptop. The laptop has an external 19" screen connected to it through the VGA port. I am not using the laptop screen (because it is small and flickers constantly) but only the external screen. When I shut the laptop lid the external screen blanks. There is no option in the power management dialog and the option "Activate screensaver when idle..." in the screensaver dialog is unchecked (which I would like to re-enable to blank screen when idle for x minutes). How can I get Ubuntu to leave my external screen on when the laptop lid is closed?
I'm having a bit of an issue. I was transferring some files from an external hard drive onto my desktop computer running ubuntu 10.04...It filled up the hard drive to the max, rebooted and I couldn't login. Did some googling and thought it might be because it was too full so I plugged the ubuntu HDD into my laptop, removed some files and tried again. Still no luck.
What it does is tries to automatically login (that's how I have it set) at the main login prompt, it for some reason is not able to and the screen flickers a bit and shows the login screen. I enter my username and password and it flickers really quick and goes back to the login screen. Does this for my other user account as well. I can login via the command prompt (ctl-alt-f7) and do stuff there, but I cannot login to the GUI.
I have openSUSE 11.3 with an nvidia card connected with two monitors. In the past I used xinerama which was ok, but now I need to have two separate desktops, one on each screen. I set the nvidia driver with x screen, and now one screen works perfect and the other only shows a black screen. When I move the mouse over the black screen, the mouse pointer turns into an X, but moves correctly, which seems to me that the problem is that I need to set the second desktop to that screen. I looked on forums on how to do so, and no luck.
1-When entering a music CD, video or files, any programs or music or video players and desktop are closed are removed all the icons and I can not open any program only on firefox, I can not see the files or anything . (NOTE CD-rom is in mint condition)
2-I graphics effects ruin the entire desktop and when it is in fact no graphic still looks bad everything looks pixelated or striped like when flex is damaged or something is damaged and is in perfect condition.
Now I'm going with the version 10.04 of ubuntu:
1-I have the same problem with the CD I had in 9.10, except that in the 10/04 I can open some programs with the Emphaty and monitor systems.
2-When you close the laptop when I open the screen looks as if the flex embers damaged or broken screen (when it is of course) and I have no other to reset it.
3-When you drive about 30 minutes using computed with any open programs (Firefox, Emphaty, emesene, movie player, Gnome player) to close it or minimize it gets super slow and sometimes if I Friza and then to turn it off and repeat history.
4-When I'm watching a movie or a video with movie player is super slow (just what I'm playing does not the OS) as if Lageado and stuff. But with Gnome looks pretty good player just the video looks very small and I can not put it full screen. Certainly in a Dell Latitude C610 Pentium III-Processor: 1000/700mhz-Memory: 512MB Graphics-Card: 16mb.
I was trying to take advantage of that new HTML5 <video> tag, and Firefox 3.5's native Ogg support, by embedding an .ogv video. Here is the references I used:
[code].....
Here was the code I put on my web page:
Code:
<video width="640" height="480" controls="controls"> <source src="http://path/to/uploaded/video/on/my/site.ogv" /> Your browser does not support the <code>video</code> element. </video>
However, when I view it I get a video box, but it is grey and will not play a video. I keep playing with the various attributes but the result always seems to be the same. I also tried it on a Windows box with Firefox 3.5 (to make sure it didn't have something to do with my Linux config) but the results were the same.
I've attached an example.As you can see,fgl_glxgears window is under the chrome window(look at the title bars), but you can still see the gears.The same thing happens with video in VLC.I'm using 11.04. This happens with or without compiz. I'm using the latest ati video drivers from AMD's site (11.5).
my computer shows no video not even the bios. my conpound from the heat skin ran? i can send the mother board back look at the pic and if this has any thing to do whith why i have no video.
I used to have a working vlc. Then I added debian-multimedia to my sources.list and installed several other movie players (kplayer, kaffeine,). As a result, my vlc no longer works: When I run it to display a movie (any movie, I tried several) I get the sound OK, but there is no image, and the window stays small (like when playing a sound file). How do I get vlc to display movies again?
One very specific issue regarding KDE in OpenSuse 11.3
- when I close the lid of my laptop or get into a screen saver mode, sometimes when the xserver comes back to life it basically goes back to the KDE login menu (log out) without any warning...
I have looked at the detailed settings and power performance management but nothing there.... I am in fact in "don't do anything" mode (power management) but this does not seem to do much.
I've checked gdmsetup and there isn't anything that I can see that keeps my general users from getting in remotely. I can get the Gnome to login as root but not as a user. SSH from PuTTY works fine for all users. The error I get actually says that the username or password is incorrect - checked using SSH and it is fine.
I've just installed OpenSUSE 11.2 on a new machine. Because I was still using another machine as my main box while building the new one, the monitor attached when it was installed has a resolution of 1280x1024 @ 77Hz. I've now moved it to be my main machine and the monitor is a widescreen 1680x1050 @ 60Hz model. When I boot it normally the screen fails to come up - even GDM doesn't show. If I boot in failsafe mode the system comes up fine, but in 1280x1024 mode. The 'Configure display settings' icon shows the monitor as 'Unknown'. Couple of things I tried:
1) Switched to runlevel 2 and logged in as root. Ran Xorg -configure and looked at the xorg.conf.new that was installed, but it just had generic info for the monitor:
[code]....
2) While still in runlevel 2 and logged in as root I did a startx. This brought up the X display in 1680x1050 ok, and clicking on the 'Configure display settings' icon showed it had correctly identified my monitor and had set the size and frequency correctly.
3) Given the results of (2), I then tried logging in as myself in runlevel 2, did startx again, but this time the display failed to come up again.
There is an option to play ..... video in totem. But i am unable to play any video. Error shows, "Could not open location; you might not have permission to open the file.". I searched google, few suggestions are patches for ......py file, but there is no file named ......py in /usr/lib/totem/plugins/...../ folder.
modinfo -l shows a ton of different video drivers, from matrox to ATI. Are all these drivers currently loaded my kernel, and is it ok to disable all but nvidiafb (since my system if 100% nvidia)?
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
i installed ubuntu on my samsung x30 yesterday while connected to my external monitor. when i power on my laptop the samsung start up screen appears both on my laptop and monitor however as soon as ubuntu starts the laptop screen breaks into two solid colours, ubuntu only works on the screen.
