i have just put in my new 320gb seagate hdd and it shows in bios, however upon booting from USB it does not show on the OS, nor does it show on the installer does anyone have any idea what could cause this or how to sort it?
View 5 Replies
I switched the Hard Drive in my main desktop yesterday with another just so I could install something on it. Then, when I switched my other desktop hard drive back to it's original, it wouldn't detect it.
The power cables and all the connections are still good, because it still recognizes my other computers hard drive. I'm in deep trouble for screwing up the family PC, how can I fix it?
Quick background: I've always had problems with Ubuntu on my external hard drive, but I think it's actually with grub in Gnome - any Gnome. I had Karmic installed until after grub upgraded and a bootloader error made it impossible to log in, so I went over to PCLOS KDE.
I've missed Ubuntu and really wanted Lucid, so I tried reinstalling it to the external. Same problem. I tried PCLOS Gnome, and, yep, same - though I could reinstall the KDE version no problem. Anyway, after umpteen attempts, which included formatting the external drive in Windows (which doesn't ever recognise the external in My Computer till I do), letting Ubuntu do the partitioning, doing the partitioning myself, I finally tried to install through Windows via Wubi - still to the external drive.
It failed, and now the drive is not recognised in the BIOS, Ubuntu, or Windows (I've now installed a dual Ubuntu-Windows boot on my internal). Have I stuffed up my external drive? Is there some way I can make it recognisable (changing BIOS settings???). Do I need to supply more information?
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
If an old bios and mainboard is being used, such that it cannot handle the large size of HD, then is it useful to say use a live CD and from its initial menu (pressed a key), choose 'Boot From First Hard Disk'? Would this be similar in getting around a bios and disk size limitation I wonder - like - does the use of a live CD in this way avoid using the bios to point to the active partition??
The reason for asking is that a friend has a couple of quality old rack mounted server machines and wants to use Ubuntu having now fitted 80 GB empty drives. Live CD seems ok, and 11.04 install goes ok but on boot up grub comes back with an error.
I recall that early machines cannot see larger(?) HDs for booting purposes even though installs go ok in very large HDs. I wondered if a live CD to boot up temporarily - trouble shooting - would be worth trying for this reason, or am I way off?
start getting Linux up and running. Like a lot of people, I chose an older computer I could fuss with, a 500mhz 256meg ram machine, and decided to install Puppy on a spare 40meg hard drive I have, as my bios does not boot from usb...I think...
Anyway, I have found that my bios does not recognize the hard drive when formatted to ext2! I have taken the drive and formatted it back to ntfs, and my bios recognizes it, and then back again to ext2, and nope, it's not there, thus I am still booting puppy from the cd...sigh...
Is my bios so out of date that I'm just out of luck? Is there anyway to check this?
I have been running Ubuntu 9.04 for the past year. Tonight decided to upgrade to 9.10 thru update manager. Every thing regarding the install seemed fine until the request to restart the computer. I hit the restart and it will not boot up. Computer goes thru the normal restart screens.
Screen flashes with bios info--no hard drive detected, then proceeds to show booting from hd, then loads grub stage 1.5 (not grub 2)and screen goes blank.
I installed(actually i hope i did) CentOS 5.5.However i can see my HDD in Hard drive menu in bios but HDD doesn't shows in boot menu.
View 10 Replies View RelatedI have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
View 2 Replies View RelatedWhen I enter my Bios it says I have 1 Gigish and in ubuntu 243.1 MiB. Things might be alot faster with that ram working. I have a dell E210882 Motherboard.
Total used free shared buffers cached
Mem: 243 237 5 0 6 47
-/+ buffers/cache: 183 59
Swap: 708 41 667
my computer shows no video not even the bios. my conpound from the heat skin ran? i can send the mother board back look at the pic and if this has any thing to do whith why i have no video.
View 5 Replies View RelatedI come bearing a question that I hope I can get some info on. Here's the situation: I installed Ubuntu 10.04 Netbook Remix on my Acer Aspire One (didn't want it, but got it for free). I installed and am dual booting it with windows 7 basic. Both worked fine until this morning when the laptop ran out of battery and shut down.Now, on start up, the BIOS screen flashes, and its not the same BIOS screen, but I can't tell what it says, its moving too fast, the laptop then restarts. This problem may be bigger than the linux part of it
View 9 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedMy parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedSometimes when I do anything write heavy such as transferring backup or downloading large files from the net, the machine crashes almost completely.
View 8 Replies View RelatedI have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View RelatedI installed Ubuntu 7.10 on my desktop a month ago before I left my apartment for winter break. It worked beautifully for the week I used it, but now the computer won't boot. I'm using the ubuntu live cd right now to type this. I can't install it over my last hdd because apparently both of my hdds aren't bootable. I unplugged the computer for the month I was gone and the BIOS date reset to 2004. I'm not sure if that affected anything, whether I need to replace the CMOS battery? The computer was built in 2004 so I'm thinking the battery might be old. Basically the computer functions on the live cd, just won't boot from either hdd.
View 2 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I wanted to use an older computer again, so I tried to fire it up, but alas. I don't recall when the last time was that it was running, but I don't think it didn't run back then. I just had a new computer
[HARDWARE]
- MOBO: ALiveNF6G-DVI
- BIOS: BIOS P1.30
- CPU: AMD Athlon 64 X2 4800+
[code].....
[PROBLEM] What happens is this:
1. The computer starts up. No POST-beeps.
2. CPU is ok.
3. RAM is ok.
4. Disks are auto-detected and listed.
5. Then the computer halts. No message, no warning. I am not even able to hit control+alt+delete (I say this, cuz I noticed this. I am able to run and alter the BIOS in an earlier state of booting up, with the keyboard, obviously). It just completely hangs/locks.
[WHAT I HAVE TRIED SO FAR]
1. Removing all hardware but monitor, RAM, keyboard. - Result: comp stops doing stuff after checking RAM, without any message whatsoever.
2. Cleared the CMOS (with the jumper, also by removing the battery). - Result: no changes.
3. There are two pieces of RAM. I removed them all. Result: POST-beeps. I put one back: loaded till after disks. See above. Exchanged the RAM-piece with the other RAM-piece (so: still one piece of RAM): same thing.
My laptop is windows xp pro, I need to install ubuntu, so I kept Ubuntu CD into my lap and restart, again it shows windows xp, some body told "BIOS is not set to boot from CD or DVD drive".
View 2 Replies View RelatedI recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
The brand new MEMOREX 24X Lightscribe DVD player(SATA) is not detected by my UBUNTU 10.10 install (via USB stick LiveCD install). I know it should have worked out-of-the box, but it does not, dmesg or lshw command shows all other SATA connections ( 2 hard drives) , BUT the DVD Drive. The DVD drive is detected by the MSI BIOS, it is also fully functional in the dual-booted Windos 7 installation next to the Ubuntu 10.10, so I know the DVD player is ok. I have the latest B3 Stepping MSI P67A-GD65 motherboard with Intel i7 2600K cpu.
View 3 Replies View RelatedHardware is a Supermicro with C2SBC-Q board, have set up a RAID1 with 3 WD drives, the BIOS "sees" the "LightScribe" DVD drive but it is not being recognized by CentOS (5.2 x86_64). It's on an IDE bus, set to "master".# dmesg | grep -E 'CD|DVD|hdc' produces a new prompt with NO feedback, BTW.I have CentOS 5.2 i386 running on this machine with the same DVD drive, it was not an issue.
View 10 Replies View RelatedI've recently installed an internal optical drive (Blu-Ray RW: LG WH10LS30) into my dual boot system. The Windows partition had no trouble with this. However, ubuntu began taking ~30 extra seconds to boot. Once ubuntu finally gets running, the drive is not detected at all. dmesg showed the following:
Code:
$ sudo dmesg | grep -i 'ata2'
[ 1.430315] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf098 irq 15
[ 2.777449] ata2.01: failed to resume link (SControl 0)
[ 2.933509] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.933521] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.933531] ata2.01: link offline, clearing class 3 to NONE
[Code]...
Further investigation revealed that changing my BIOS settings for SATA from IDE to AHCI fixed this problem entirely. The ubuntu partition boots fast again, the drive is working. Except, this causes the Windows partition to fail completely. I'm wondering, what is the best way to fix this? Hopefully without a complete reinstall. Is there a GRUB command that could apply AHCI to only the optical drive during ubuntu boot?
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedI have a working F-10 box with an older motherboard (pre-sata). The p-ata ports are full (4 drives), so I'm trying to add a sata controller and another drive. The sata controller plugs into the pci bus, but is not detected by the bios (very old). After booting, the OS loads the driver module(s) and detects the new controller and drive. I was able to add the new sata drive into the LVM system using system-config-lvm. All was fine until I rebooted.
I get pages of lvm errors and booting fails. It looks like it's trying to mount the volumes before the sata controller is modprobed. Is there a way to get the os to modprobe for the new controller before trying to mount? The extra drive space is on a data partition, not the boot partition.
I have an HP motherboard w/P4 with 40 GB disk another Maxtor 500GB Hard disk on the usb. Problem: On start up with device selection for booting, my pen drive always gets listed as USB HDD0 and USB HDD1 and Iam able to boot thru' them. However my Maxtor HDD in the first partition of which I have installed FC 13 after much pain,so as to not disturb my existing installation FC 11 in internal drive. This device itself is not visible, nothing to have to say about its partitions in bios list of devices to select. Whether this is a drive related problem or bios related. How may I make it visible in bios list.
Further note: Fedora core 13 installation didn't worry about the windows XP and Fedora 11 installation in main drive. It allowed for installation of the individual boot loader in the installation drive itself.
Bios not recognising this drive precluded access at boot from grub.conf of the exising FC 11 installation too.
We have a RHEL5 box with a 2.6.18 kernel up and running (no RAID in use, but the SAS controller is enabled in the BIOS). To expand the storage, we bought a 2TB drive to add to the machine. Currently the setup is like this:
SATA-0 => DVD-rom
SATA-1 => DVD-rom
SATA-2 => empty
HD-0 => old hard disk
HD-1 => old hard disk
HD-2 => new 2TB drive
HD-3 => empty
The BIOS doesn't seem to have any way to list the drive on any of the HD ports, only the SATA ports, so I'm not sure if the drive is being recognized or not. fdisk -l doesn't seem to recognize the 2 TB drive.
I'm going to try reordering the drive ports and try the drive in another machine, but I'm baffled here...
My CD-DVD drive have suddenly stop working in my laptop and when I've checked the BIOS setup I've seen that the drive is no longer recognized by BIOS (there is no option for this drive so I can't enable it). I don't know what CD-DVD drive I have (since I can gather information about it because it's not recognized by my laptop) but I think it's a Matshita CD-DVD driver. I use Ubuntu 10.04. Do you know how to make it work again?
View 6 Replies View Related
