I am running Lucid server (for a Moodle install) and have sucessfully mounted a cifs partion that resides on a Win 2008 Server to be used for backup purposes.I fist tried using Webmin to backup files but have subsequently also tried using rsync.Whatever method I try to use to copy files across I am getting an error "No space left on device 28", yet the Windows partition has over 800Gb free. The root partition on my Ubuntu server also has over 25Gb free. I have also checked /tmp and /var/tmp and am unable to find anything that might cause the problem. The Windows share is mounted as follows:
I opened this thread in Ubuntu forums with no luck at all. Hope someone can give me a clue of what happens.URl...Recently, gnome has been warning me about low disk space, always less than 1.5GiGs. The problem is, baobab (disk usage analyzer) tells me that there are something like 50GiG free. I am sure that I have the free space ( I can write big files ) but the system keeps reporting low disk space.
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added): h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
Today morning I logged on to one of our servers (through ssh -X) to perform a routine maintenance. When I tried to open a GUI application, it failed to connect to the X server of the workstation. Eventually I ended up issuing the command
Code:
df -h /
and shockingly it showed that / is 100% used. I checked / using
Code:
du --max-depth=1 -xh /
to check the sizes of the individual directories, which showed that only about 18% of the / is used and that confused me badly. There was no quick solutions when I googled around; but luckily I found the following link which nicely explained the issue I had:
[URL]
All I did was found out the services responsible for those unreleased files (using lsof +L1) and restarted them. That is it. Now df reports only 18% of the disk is used and all my X things started working again, thanks to Walker.
So I reinstalled ubuntu on my laptop, but my partition is full while it isn't. I launch baobab, it says I got 4.48 GB free of 60GB while there are only 27GB files on my partition. Here is my partition set-up if it's useful:
I have a total of four partitions on my Ubuntu 9.10 (Karmic) system:
sda1 = /boot sda2 = / sda3 = swap sda4 = /home
My boot partition is 94 MiB which I was recommended would be more than enough space. Turns out my /boot partition is full and I now get a message every time I log into Ubuntu saying, 'The volume "boot" has only 0 bytes disk space remaining.' Also after installing GParted to check up on my partitions I got the following error in apt-get:
Code: Setting up gparted (0.4.5-2ubuntu1) ... Setting up kpartx (0.4.8-14ubuntu2) ... Processing triggers for libc-bin ... ldconfig deferred processing now taking place Processing triggers for initramfs-tools ...
[Code]....
I have no experience messing around in my /boot partition besides modifying GRUB. I think most likely I just have too many kernel versions installed in the /boot partition?
I few months ago I was forced to do a fresh clean install of Karmic becasue my root partition (then 80 GB) was full. I shooulkd have used a LiveCD to resize partitions then but I didn't so when I installed Karmic this time I ended up with a 160GB partition for /.Color me surprised when last night I got a message that / was at less than 5% free space. 1. I routinely do a apt clean so the cache is not an issue. 2. I do not store backups on /. I use rsnapshot to same backup on an external hard drive. 3. I use Virtualbox but all my hard drives (VDI) are on /home.
I mount /home on its own partition that it is 20GB wide.I used 8GB in /home/b. /home contains just /home/federico & /home/lost+found (which appears to be empty).Strangely the partition appears to be full. I kept deleting files (and deleting also the Trash) but after I while my partition was full again.I do not use a swap file on this partition.
I have Ubuntu installed on my Macbook Pro but when I am mount my mac partition by clicking on it in Nautilus some of my user folders are not accessible unless I start Nautilus as root. Is there a simple way for me to make these folders accessible?
I am running Ubuntu in WUBI inside Windows, my first question is, can you do a full install to a new partition through the WUBI installation? Or would it be better to partition the disk, and just install Ubuntu, then deal with the MBR issue (been a while since I had a normal install, maybe the boot problems are gone?)? And is there any actual advantage to doing a stand alone install, while still dual booting Windows? Is there any gain from it versus the WUBI install I am running now?
I am having trouble logging into my ubuntu 11.04 desktop. When I type my username and password to login my screen goes blue, as if it is going to next show my desktop wallpaper, but then it loops back to the login screen. I had no idea why and so I went to ALT-F1 and typed in "df" and it turns out that my root partition is full. This is strange since I set aside 40GB for it and I didn't install anything or that many programs that would fill it up. Anyhow, is this fixable by booting to a live cd and using gparted to make root bigger or is there a better way to fix this?
I have a 10gb partition I use for data. The /home is there, and I mount any other data partitions (like /music stuff) onto /data. These other mounted partitions add up to something like 60gb of diskspace, but since they're just mounted on /data, I believe they only take up 4096 bytes per mount point.
Some time ago, I found that the /data parition was full. There was only 330mb of data in /home, so I was perplexed. I found a cache dir under .opera that reported itself as having 132TB (yes, that is terrabytes) of files. I thought deleting the offending directory was the answer, so I deleted that cache dir and every file or subdirectory in it, but the /data partition is still like 99% full. I am a wee bit confused.
This very full /data partition is my only jfs partition. The other mounted filesystems are either ext3 or ntfs. Is it possible that the journal of this filesystem is corrupted? Or is hidden somewhere on the /data parition, taking up a bunch of space? (I obviously don't know enough about filesystem to know whether or not this is a likely scenario.) Is it possible to zero out (or delete and re-create) the journal, if so? The only other thing I can think of is to move all the /home data off, delete the partition, then re-create it and move /home back. I will do that if need be, but I'd rather learn something from the experience, weird as it is.
I set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
I recently installed Lenny and used the "Guided - Use Entire Disk" option.I made separate partitions for root, /etc, /var, /home, /usr and swap.I trusted that the auto partitioner would choose sensible sizes but possibly that was a bad move, root is only 340Mb and is full.
One day I was using Gparted and following this I rebooted and had this came up
"Install problem! Configuration defaults for Gnome Power Manager have not been installed correctly. Please contact your computer administrator."
Initially from reading the forums I figured it was because my Ubuntu partition ( I dual boot Windows 7 and Ubuntu 10.4) filled up for some reason.
I used a boot CD and cleared some files in /media. It seems like I kept about 17 GB of backups there for some reason.
The problem is that even though I cleared this out, I still have the same message.
I could just reinstall, but I want to try to keep my data for once, especially my virtualbox harddisks, unless someone can suggest a way to save it and reuse it.
I ran a test where I filled up the /var partition. The disk_full_action in auditd.conf is SUSPEND. I was expecting to see a message in /var/log/messages to indicate that the audit daemon was suspended because it did not have any space left on the partition.Why didn't I get these messages? Also, how can I tell if the audit daemon is suspended?
i built a rpm package, which i figured out later that i wont be needing, so i deleted the rpm file and also the build package put together they were abt 5.8 GB... but my system monitor shows that only 700MB of space is available the 5.8 GB is not visible but its gone
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
I have a problem that I can't login to SUSE in graphical mode. I get to the login prompt; enter my username and password; SUSE starts to do the login but then crashes back to the login prompt. Looking in /var/log/messages doesn't tell me anything useful. However, I noticed that my SUSE system partition is full (at 20 GB). So I think this is the culprit that is stopping my login.
Unfortunately, I can't extend my system partition as it is ext4 (SUSE default) but parted (from SUSE 11.2 live cd) complains that it can't do anything with ext4.
I'm using OpenSUSE11.2 x86_64 KDE 4.3.5 Linux 2.6.31.14-0.1-desktop
I want to encrypt Full partition instead of creating a file and encrypting it, and also want to move this disk to another server. do i need some files also (that hold keys) with my self on new server. i am using FC11.
I'm sure I've done this before and never ran into trouble so it's not like I wasn't thinking, just something went wrong this time and I'm screwed. I'll post a fdisk -l to show ya what I mean.
[root@localhost ~]# fdisk -l /dev/sda Warning: invalid flag 0x0000 of partition table 5 will be corrected by w(rite) Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x624aa2e0
[code]...
Well I tried to install Pclinuxos 2010 to the same partitions as Mint 7 and basically just over write it (this I have done before) but this time Pclinuxos says there is a bad block and it can't copy files to / (sda7) I didn't think much of it at the time and thought I would try to install it (Pclinuxos) on a separate 100 gb usb drive and it was a sucessful install.
After booting Pclinuxos I try to access my 1TB sda hard drive and I can ony access sda1 .....when I look at /dev/sda in gparted is shows the whole disk as unallocated.I have done nothing at this point in time other than what I just said because I am very afraid of loosing all my pictures and everything else on that disk....and for those that will say always back up ....if ya think I'm not kicking myself right now your dead wrong......
I have recovered a whole dying hard drive using the command ddrescue, only 8192 byte out of 4.3 gigabyte are unreadable.I have used the command (gnu) ddrescue /dev/sdb DiskImage.img..But unfortunatly this way i have a full-disk image that is not mountable... ( or at least i don't know how to mount it ), and the disk doesn't seem to work anymore that good... ( crack crack crack... ).To see the partitions inside the "big" file, i have used fdisk -l, and damn there is only one partition, but how can i mount the content???
I know i could use photorec foremost or similar software, but since the disc image is almost perfect, i would be able to preserve file names, paths and dates...The last idea would be to mount it as a full-drive image with Virtualbox... But transferring data would be quite annoying.
I have just installed " partimage" partition imaging - I want to perform a FULL system back up - problem is I cannot find where this programme is sitting to be able to perform my back up .
