I have mounted window shared partition to my RHEL 5.4 server through following command
Quote:
But I'm unable to mount the same via fstab.172.20.x.x is my windows server download is my shared folder name.
Suggest me correct fstab entries
My current fstab entry is as follows
Quote:
I have the following line in my fstab:
Code:
//192.168.0.242/websites /mnt/supercube cifs rw,user=XXX,pass=XXX,iocharset=utf8,file_mode=0777,file_mode=0777,dir_mode=0777,uid=XXX 0 0
But it doesn't auto mount with everything and disconnects whenever I suspend my computer. The only way to get it to mount is with
Code: sudo mount -a and it mounts fine with no error.
Did lucid change the way it uses fstab or something? Obviously writing mount -a isn't a huge concern, but it kind of destroys the point of putting it in my fstab.
I'm using cifs to mount windows share.I have created one credentials file and given the path in fstab to mount at boot time. Now i want to encrypt the credentials file and place that in the fstab file.But it is not accepting.. how to use encrypted file to use in fstab,so that normal users can not watch the credentials inside the file.
View 3 Replies View RelatedI have the following two lines at the bottom of my /etc/fstab
Quote:
//172.16.6.15/e /tmp/e cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
//172.16.6.15/e/Public /var/www/index/pub cifs _netdev,iocharset=utf8,credentials=/root/.smbcredentials,gid=0 0 0
My server address is 172.16.6.1.
If the destination (which is my workstation desktop) 172.16.6.15 is offline when the server tries to boot, the entire boot procedure halts with the following message: Unable to find suitable address. mountall: mount <destination> terminated with status 2 The problem is that my server runs headlessly, and every time something silly like this happens where you'd normally expect the OS to continue regardless, I'm forced to plug a monitor in and diagnose on console
So my question: Is there any way to make it proceed with the boot normally despite the host being unreachable? I could probably chuck a mount command into crontab or /etc/rc.local or a /etc/network/if-up.d script, but isn't this the way it really should be done (/etc/fstab)? If so, then we shouldn't expect the entire boot to halt just because a network share can't be mounted, right? While on the topic of a headless ubuntu server 10.10 not booting without some kind of intervention, I have yet another issue: If the server goes down without proper shutdown (power failure, for example) the grub menu displays the kernel choices and there's no countdown timer. Instead, I have to manually press enter to continue the boot. Is there any way around this? Clearly this should not be the case for a server distribution
I can't remember if things with mounting vista/ntfs partitions has changed, but I cannot seem to get my partition mounted as a read-write partition.
I tried this in fstab:
And it made it read-only..
So i tried this:
And it wouldn't mount it.
Quote:
Failed to mount '/dev/sda1': Operation not supported Mount is denied because NTFS is marked to be in use. Choose one action:
Choice 1: If you have Windows then disconnect the external devices by clicking on the 'Safely Remove Hardware' icon in the Windows taskbar then shutdown Windows cleanly.
Choice 2: If you don't have Windows then you can use the 'force' option for your own responsibility. For example type on the command line:
Or add the option to the relevant row in the /etc/fstab file:/dev/sda1 /media/vista ntfs-3g force 0 0
I have 2 USB drives connected to an XP machine that I rotate twice a month for backups. On my CentOS box, I have that drive mounted at /home/backup using cifs.
Because the drive is mounted on the Linux box, Windows XP complains when I try to "Safely Remove Hardware". As a result, I have to "umount /home/backup", then "Safely Remove Hardware". After connecting the new drive, I then have to "mount /home/backup" in order to use it again on the Linux box.
Now, this question may be a Windows XP question, but I was wondering if there is anything I can do on the Linux box first. Is there anything that can be done on either end, so that I won't have to "umount /home/backup" first?
I have dual boot: Ubuntu 10.04 and Opensuse 11.2.Howto mount Read Only ext4 partition from Opensuse in /etc/fstab under Ubuntu?
View 3 Replies View RelatedI'm dual booting with Windows 7 and would like to have my windows 7 user folder mount when I boot.
After some looking around I edited /etc/fstab to add the following line:
This works. But it mounts the windows partition from the root level. I'd like to just mount C:UsersFHSM (/Users/FSHM) to /mnt/windows.
I'm trying to get it so that when I click on the windows drive I get my windows user folder instead of having to click through from C: to get to it.
I'm the only user on this system but if I created a second windows user would my home folder mount for that person too or does setting the user ID prevent that from happening?
using Ubuntu file browser, I browsed my Windows network and logged on to a Windows PC. Now Ubuntu file browser shows me "C$ on WinPC" as a folder. I can open it, read/write files, etc.But from bash prompt, I don't see anything of type CIFS/SMBFS listed in the output of "mount". Only the usual suspects (like local CDROM). How can refer to Windows files from Linux commandline?
View 6 Replies View RelatedI am unable to mount my Windows 7 partition. I receive the following error:
Error mounting: mount exited with exit code 1: helper failed with:
[mntent]: line 14 in /etc/fstab is bad
[mntent]: line 16 in /etc/fstab is bad
mount: can't find /dev/sda2 in /etc/fstab or /etc/mtab
I've successfully mounted a network share with mount.cifs for the past 2 years using fstab with credfile.
[Code]....
Yesterday I moved this system to a new datacenter, but did not alter fstab or the credfile. The //server/share directory has IP rules in place, but this was updated with the new system IP while we moved the system. Now, I am mysteriously unable to automount //server/share. The local error is 13 (permission denied). The Windows server we are mounting returned a code that is defined as "username is valid but password is incorrect" Again - no changes (content or permissions) were made to my credfile or fstab entry. I've restarted netfs a few times, including rebooting the system twice. What is baffling is I can successfully mount //server/share via command line: Code: mount -t cifs //server/share /mnt/mycooldir -o username=foobar,password=1234
The username and passwords are identical in credfile and the mount options - I copied & pasted username / password from the credfile itself.
I am getting an error when I try to mount a CIFS file-system via terminal:
cifs_mount failed w/return code = -22
If I Places > Connect to server, it will open just fine. The share is also accessible from all the other computers on the network.
Google search brought me here to an archived thread which gave a different error number (!)
Desktop is Ubuntu 10,4LTS/Gnome; fresh install with no additional packages installed (so it's possible I am missing something but not sure what!)
Upon trying to boot Windows I got through the GRUB startup selections and then i get stuck at a black screen displaying "Starting Up. . ." That would be no problem, I just boot ubuntu instead and mount the partition to access the programs I'm looking for. Now I get an interesting error message:
"Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup: magic: 0x00150000 size: 4096 usa_ofs: 0 usa_count: 1040: Invalid argument Actual VCN (0x15000011d92501) of index buffer is different from expected VCN (0x1). Failed to mount '/dev/sda1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details."
I would run chkdsk in windows if I could, but that's my problem in the first place.
this subject seems to have been touched a hundred times, but after following all the advice google could provide, i'm still unable to mount cifs shares as user, here's the fstab line
<server> <mountpoint> cifs rw,noauto,credentials=/etc/gattonauth,uid=1000,gid=1000,dir_mode=0770 0 0
i've chowned the mountpoint to the user,
ive tried
chmod +s /sbin/mount.cifs /sbin/mount.cifs
suggested by http://www.linuxquestions.org/questi...-lenny-711337/
I have a bootable utility toolset that I put together with Fedora 14, one of its primary functions is to map a user designated share via script and access information from it. The command that I used, that functioned perfectly, in Fedora 14 was:
Code:
sudo mount -t cifs -o user=provided.account.name //file-server.mydomain.com/share/images /mnt/source
[code]...
/dev/sda1: UUID="1ABC9F967605D379" TYPE="ntfs"
View 2 Replies View RelatedI am getting this error when trying to mount my client on the directory I exported in Yast2 NFS Server
View 9 Replies View RelatedI am trying to setup fstab to automatically mount my NTFS partitions. I have used various Mount managers to create the entries in fstab. The fstab seems fine, but when mounting at boot or even via Nautilus I get the error message that I do not have permission to mount the disk.
1) Can this permission be set in the fstab file? If so what is the syntax of the fstab entry?
2) If not, is there a tool i.e. GUI to set the mount permissions?
I am trying to mount cifs through fstab but it is not working. I have an Ubuntu samba server and a Kubuntu client. The share from the server is one dir with subdirs having different permissions and owners/groups. When I do AS ROOT:
Code:
smbmount //192.168.0.254/share /media/maps/share -o username=toshko%pass
the output of the "mount" command is as follows:
Code:
//192.168.0.254/share on /media/maps/share type cifs (rw,mand)
The result is messed up owners with different uids and groups:
[Code]...
I just went from Jaunty to Maverick. I booted Maverick and manually mounted my Windows Network drives by clicking on the appropriate "mount" command in the directory /media.I then created an fstab file like I did in Jaunty. Here is the smb mount command that I had in the fstab file. I had a file with the user id and password in the credentials file.Code://???.???.??.?public_p/media/servername smbfs credentials=root,dmask=0777,fmask=0777 0 0This provided me access to my server for the past 18 months.I modified the fstab file for Maverick which was working fine for 3 days so I would automatically mount the server drives.
View 1 Replies View RelatedI have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedI was dual-booting Ubuntu (10.10) and Windows 7. I installed Backtrack in addition to these 2, and the Ubuntu GRUB was replaced with the one from Backtrack.
Now when I boot, only Backtrack and Windows 7 are listed in GRUB. When I run fdisk from Backtrack, I see all partitions, and running a Partition Manager lists the Ubuntu partition as a Linux partition. However, the partition manager says that it is unable to read the contents of the partition, and that it is unable to re-read the partition table.
Also, the Ubuntu, Backtrack, and Linux Swap partition are all listed under the same Extended partition.
i'm trying to setup a permanent CIFS share from my nas, but it keeps prompting for a password dispite GUEST access set on the share.FStab is as follows:
Code:
//192.168.0.253/media/ /mnt/nas1_media/ cifs guest,_netdev 0 0
if i do
[code]....
Hopefully this'll be an easy one (but I wasn't able to find any other posts with the exact same problem).I'm connecting to a large hard drive at work. I can mount perfectly fine. The following is the relevant line in my fstab file:
//XXX.XXX.XXX.XXX/data /mnt/labdata cifs users,rw,exec,suid,dev,username=XXX,password=XXX,_ netdev,fmask=777,dmask=777 0 0
The problem is that when I try to cd to the correct directory, I get a permission denied error. I don't own the mount point, and there aren't general read/write permissions set. But if I change to superuser, I can access it no problem. I can read, write, make directories, etc. So the problem is with my computer--not the remote one.
Now, if I add the option uid=MYID, I can read and write just fine. The system makes me the owner of the directory on mounting. But that's not what I want--I'm trying to allow multiple users access to this file system. I want there to either be a neutral owner (e.g. root) with others having read/write access, or I want the owner of the mount point to be the user currently logged in.
I have been running a server for 3-4 years now, and my shares have been mounting just fine. Well, the network admin looked at a backup and seen that the last date backed up was june. I got to looking around and seen that the share is not mounting. I can mount it with sudo mount -a, which tells me my syntax is correct. I get an error about IPv4 socket not opened and it is aborting the operation when I run dmesg | tail, since I can use the above command to mount later, it sounds to me like it is trying to mount before the network connection is ready.
I have done some looking over some init scripts and found that in the /etc/rc.d/init.r/netfs script it has a line that states that it is checking to see if the network is up before it starts to mount the filesystems and the such. This is set to no, my question is, can I change this option to yes and get my desired results, waiting for the network to be up before it mounts the filesystems.
I'm having some trouble in trying to make a clean solution and tougher time searching to not get the basic mounting pages/posts. So I thought I'd throw this out hereFor Oracle, we have an app server that runs /sharedapps and is an NFS mount for all other app/db nodes. What I'm working on now is that on this app server that hosts/exports /sharedapps file system has a sub folder with a CIFS mount (/sharedapps/data/appmount). e thing is that the remote nodes with the NFS mount to /sharedapps don't see the remote data in /sharedapps/data/appmount, only the main app server that has the CIFS connection. Realistically it makes sense why, but I'm trying to research if there is a way to have it do so. This is where I'm struggling. We are working on this in a dev instance right now but soon to be in production. In production, there are many DB nodes that could process a request which is why it would be best to have the NFS connection follow the remote CIFS connection
View 8 Replies View RelatedI spent all day learning some concepts of Samba which I left while preparing for RHCE.One of them is how to permanently mount (fstab entry) windows shared folder.Manually mount command is running fine for me.
View 6 Replies View Relatedmounting my windows partition.. I've got it set up under /etc/fstab, but anytime I try and open it (as local user) I get permission denied.
[Code]...
I just made a fresh install of OpenSUSE 11.4-Tumbleweed and have the latest updates. However fstab lines I've used in the past are not working.
Here's an example of two:
//IPADDRESS/share /home/user/mount cifs credentials=/home/user/.scripts/.creds,_netdev,uid=client_user,gid=users 0 0
//IPADDRESS/share /home/user/mount cifs guest,_netdev,uid=client_user,gid=users
I can execute a command
Code:
sudo mount /home/user/mount and it works, but I'm wanting all my fstab lines to automount at boot as on other machines.
I have a CIFS share mounted from the "Places" menu and it is accessible from the desktop.I am unable to find its location in the filesystem using "mount" Where does it get mounted to?
View 1 Replies View Related