I opened this thread in Ubuntu forums with no luck at all. Hope someone can give me a clue of what happens.URl...Recently, gnome has been warning me about low disk space, always less than 1.5GiGs. The problem is, baobab (disk usage analyzer) tells me that there are something like 50GiG free. I am sure that I have the free space ( I can write big files ) but the system keeps reporting low disk space.
View 4 RepliesI am having trouble with my HDD.
Here is how Disk Usage Analyzer looks like:
But I can not find any files there to delete.
Trash is also clean.
For our workgroup I set up a server which is basically 10.04.2 with kernel 2.6.32-32-server on a SSD and all the data on a RAID 5 consisting of 4 2TB hard disks, thus a maximum of 6TB space for data on the RAID. Having multiple users with different amounts of data from different scientific data source I set up an lvm on top of the RAID
--- Physical volume ---
PV Name /dev/sdb2
VG Name home-data
PV Size 5,45 TiB / not usable 3,00 MiB
[code]...
Here is the problem: The volume Genomes (or /genomes) is half full
sudo df -ah
/dev/mapper/home--data-Genomes
1,9T 850G 920G 49% /genomes
but the system states it as full whenever I try to add more data (tried cp and rsync). There is no quota set to the volume (I have quotas in place for users home folders. These are only for max amount of disk space, not max file number, and I am still able to move/add files elsewhere so there seems to be no interference).
I am using OpenSuse 11.2 (64 bits) with KDE 4.3.1. My hard disk partition contains 3 areas : / + /home + swap. Frequently the / area is filling with, I suppose, temporary files until it is full (15 Go) and that in a very short time, typically about 5 mn. Then, these files are cleaned by the system, when disk space is needed I suppose. The point is that during this time, the system goes slower and slower until the "cleaning". That seems to occur only when Firefox (3.5.6) is running so I suppose that these files are temporary internet files.
View 9 Replies View RelatedI can't seem to fin the command that tells how much space is used/free.
View 5 Replies View RelatedI have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
View 3 Replies View RelatedI set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
View 1 Replies View Relatedif there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
/archive/cd/cd1/photos/me.jpg > /mnt/cdrom/cd1/photos/me.jpg
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
I have a single PC that has two hard disks in it. One is 250GB running Debian linux; the other 1TB running windows. I was switching between the two by going to the BIOS and changing the order of the hard disks to boot from. Both lived happily together in peaceful co-existance. Until....
Lately, I haven't been using Linux, so I decided to convert the 250GB to windows. So I put in the windows install CD, and it all started working fine, but when it came down to setting up a partition, Windows only recognized 130GB (out of the 250GB). I got confused so I decided to re-install linux. Linux recognizes the full 250GB; it recognized that there is a second hard disk running a different OS so the grub gave the option to boot from windows. So after a couple of reboots from both drives I decided to go ahead and install windows on the 250GB. Well again, windows only recognized 130GB, but this time, windows showed me another hard disk again with 130GB capacity. Apparently I stupid enough to proceed so now both hard disks - the 250GB and the 1TB - have capacity of 130GB each. And this is where I'm stuck.
I have tried fdisk, I have tried debug, but for some reason, windows can only recognize 130GB out of the entire disks; linux on the other hand recognizes the full capacity. I also used the seagate disk diagnostic tool (seatools for MS DOS) and it found no errors on either hard disk.
How can I reclaim the full capacity under windows?
This question is somewhat open ended, so I'll describe the specific issue, what I want to accomplish in general, and what I tried to do. It'd be a little long, but hopefully not too daunting.For quite a while my approach to multi-OS boots has been to install each OS to a separate disk. When I want to boot a specific OS I change the boot drive in the BIOS. I find this convenient for several reasons, but mostly because I don't get boot manager conflicts. If I remove a disk or change the OS on it, this doesn't affect the booting of other OS's.
Note that when I say multi-OS, this meant until now multiple versions of Windows. I've occasionally tried some linux distros on VirtualBox, but now I want to do a full install, and see if I can use it as a main OS. (What prompted this was the recent release of Wine 1.2 and the fact that my new job doesn't involve any Direct3D or DDI work. I've always been partial to the open source movement, but I'm also fine with Windows and never before felt I could make the move without losing key abilities). My plan was (still is, if I can get it to work) to use Linux for everyday e-mail, web browsing and such, play Windows games over Wine, and install Windows 7 in VirtualBox for Windows development.I currently have two disks, one with my main Vista x64 installation, and the other with a Vista x86 installation which I used for my previous job and I no longer need. This is the disk I want to use for the Linux installation. It has a lot of partitions but quite a bit of free space (since I copied a 80GB disk and 250GB disk into a 500GB disk and haven't taken advantage of the extra space).My first choice of distro was Linux Mint, since it's known to be friendly to new users, and I like the software installer on it. I installed Linux Mint in the past in VirtualBox, and the latest version also installed fine, and I found installation instructions explaining how to provide my own partitions, but the installation failed during the "configuring hardware" stage. If you're interested, more details are available in this thread on the Linux Mint forums. I didn't get any reply to that thread.
I thought then that I'd try openSUSE 11.3. The live CD looked usable enough, but when I tried to install I couldn't tell how to make sure that I don't get a boot manager which will try to give me access to the Windows versions on the disks. I don't want this, and what I'm really afraid of is that an install will screw the booting of Vista x64 on the other disk (which, granted, I can disconnect for the install, but I'd rather not). At that point I decided to post a question here.So hopefully you understand what I want to achieve. I don't much care which Linux distro I install, but I'd rather have one which gives me as much usability out of the box (or easily installable) as possible.
I wonder if this is possible to extend or regrow the Linux hard disk partition from 8 GB to 20 GB without losing the existing data on the partition ?at the moment this Ubuntu Linux is deployed on top of VMware and I've just regrow the hard drive from 8 GB into 20 GB but can't see the effect immediately.can anyone suggest how to do this without losing the data ?
View 9 Replies View Relateddf -h reports that my /var partition is full..
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 2.0G 1.4G 454M 76% /
/dev/sda1 99M 16M 79M 17% /boot
/dev/sda2 9.7G 2.2G 7.1G 24% /usr
/dev/sda3 7.7G 7.4G 0 100% /var
/dev/sda7 989M 17M 922M 2% /tmp
/dev/sda8 52G 9.0G 40G 19% /home
none 493M 0 493M 0% /dev/shm
[Code]....
Does anyone know of anything that might be on the /var partition and taking up space that I can't see, or just why df -h is reporting that it's full?
I am running Lucid server (for a Moodle install) and have sucessfully mounted a cifs partion that resides on a Win 2008 Server to be used for backup purposes.I fist tried using Webmin to backup files but have subsequently also tried using rsync.Whatever method I try to use to copy files across I am getting an error "No space left on device 28", yet the Windows partition has over 800Gb free. The root partition on my Ubuntu server also has over 25Gb free. I have also checked /tmp and /var/tmp and am unable to find anything that might cause the problem. The Windows share is mounted as follows:
//windowsserver/share$ /mnt/backup cifs credentials=/pathto/.smbcredentials,rw 0 0
Code:
server:/home/mal # cd /backup/
server:/backup # du -hc *
17G export
4.0K lost+found
20M rman
8.0K sqlnet.log
4.0K test.sh
[Code]...
I wonder if I can backup files from an ext partition to a ntfs partition and keeping all kind of metadata and file infos?!
With other words:
Can I backup a full linux system from a ext file system to a external ntfs partitioned disk using rsync -a (keeping all file permissions)?
Is something getting lost of a file (like permissions or anything... flags...) when copied / rsynced from ext to ntfs?
The thing is, that when I restore the stuff back from ntfs to ext, can I still use my system properly?
And can I backup files like photos from ext to ntfs without loosing any meta data?
Or asked more in general: What is the difference of a file on a ext partition compared to the same file on a ntfs partition?
My main storage partition got full, so I'm deleting files to make room. However, df -k keeps reporting no space available on that partition (/disk). Here's the output of the command several minutes apart while another process is deleting a 30G of space:What can I do to make the space available immediately?
View 4 Replies View RelatedI've been getting this error message:"The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."a few times, and it turns out to be because of low disk space. No worry, I empty the trash uninstall unneeded programs and clean out the downloads folder that filled up my disk. And all is ok. But not this time.Since I can't use X, I delete stuff from the terminal, and also make sure to clean out the .Trash in both /home and /root. But still the disk is full. I delete more stuff, but it doesn't even seem to go to .Trash. It disappears, but no more disk space.
View 8 Replies View RelatedI experienced a full hard drive yesterday due to a massive error_log. We took care of the errors, but later found out we were missing files, including a MySQL database table. Having a shopping cart and ecommerce stuff on the site, we found that some of those files were missing, too.Does RHEL 5 have some sort of feature for automatically deleting files when the partition is full? If it does, I want to turn it off.
View 4 Replies View RelatedGnome (or XORG, I'm not sure which name to give it) freezes up not always, but about once every 24 hours after I close the laptop's cover/lid. I know this happens when I close the lid rather than open it judging by the time the clock is locked at. The cursor will move around on the screen, but noting will react to it in any way. Other services such as FTP and Samba still work just fine when the computer is "locked down". Without more details to why the problem is occurring, I have no idea what to search for or where to get started solving the problem. I have attached the XORG logs (found in var/log) in case they are of any use.
View 7 Replies View RelatedWhenever I'm dealing with large numbers of computers that need to have identical windows installations put on them, I love using Symantec/Norton Ghost to image the NTFS partition (just making the .gho file the size of the disk I've used, instead of the 160/320GB full volume size), and then uploading it automatically to a windows share.I'd love to be able replicate this exact process with Ubuntu. I have one computer that's ready to go, and a few dozen more that I'd like to quickly get that same image on.
I've heard that there's a command called dd that can make disk images, but I'd really like some sort of boot disk that can allow me to make an image, save it, then run the boot disk on another computer to allow me to reconnect to the server and dump that image on that computer. Ghost 4 Linux doesn't have a network/server component, I think.even if such solutions cost money, I'd love to know if they exist or not.
I have an computer that mounts an external hard drive for backups. The Computer hard drive is about 110 GB; the external drive is 120 GB.
When I do a df -h it tells me there is 97% in use.
Checking the computer harddrive I am using about 52.8 GB (of the 110 GB) 501,579 items, totalling 52.8 GB (some contents unreadable)
The external drive is using roughly 49GB of the 120 GB available.
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/xanadu-root
114536088 104995108 3768692 97% /
udev 1030572 328 1030244 1% /dev
[Code]....
It seems like the total % is a reflect of total space consumed calculated off of ONE of the hard drives.
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View Relatedwhich OS system is better for pc with 1GB ram and 80GB hard-disk
View 9 Replies View RelatedI have created a linux machine in virtual box now i want to add some hard disk space into it.
How would i do this. code...
I loaded the live CD (Gnome) and I got a warning about my Hard Drive, saying it was in danger of failing.Further details were that there were 360 Reallocated Sectors, and I should back data up and replace Hard DriveI re-ran test under windows, and it advised only 154 Reallocated Sectors, and that this was within acceptable tolerances.Is there any way to tell which tool is accurate?
View 7 Replies View RelatedAll my important files is already gone because I accidentally reformatted my 160GB hard disk. What software should I use to recover my files?
View 4 Replies View RelatedKernel 2.6.21.5, GNU (Slackware 12.0).
Bash 3.1.17.
I want to search an entire subtree of /, in the file system, for all files, with extension html, created on the hard disk. In addition, these have to be the last five created. I think I could split the problem into two parts: (a) Forget about the last condition. Then this is a job for the find command. (b) Sort the output of find using the date as the key, then use 'head' to print the desired output. But even two such simple steps are enough to justify the writing of a shell script. And here lies my weakness.
My script writing knowledge is rudimentary. What's the final purpose? Well, I lately saved four or five LQ pages onto disk containing information I consider valuable to me. But I don't exactly remember where on the disk. Then: either the problem posed is really of a very simple nature or it is not, in the latter case a script being mandatory. One of the algorithm drawbacks (the one described above) is that find may be running a great deal of time. My machine resources (RAM and CPU speed are low) are scarce and there possible are a large number of HTML files on the disk.
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View Related