I set up a Windows partition and an Ubuntu partition in my laptop and each partition has about 60 gigabyte of disk space. Recently I keep getting messages that the disk space in my Ubuntu partition is almost full. How is it possible since I only have computer programs which I absolutely need?
View 1 RepliesFor our workgroup I set up a server which is basically 10.04.2 with kernel 2.6.32-32-server on a SSD and all the data on a RAID 5 consisting of 4 2TB hard disks, thus a maximum of 6TB space for data on the RAID. Having multiple users with different amounts of data from different scientific data source I set up an lvm on top of the RAID
--- Physical volume ---
PV Name /dev/sdb2
VG Name home-data
PV Size 5,45 TiB / not usable 3,00 MiB
[code]...
Here is the problem: The volume Genomes (or /genomes) is half full
sudo df -ah
/dev/mapper/home--data-Genomes
1,9T 850G 920G 49% /genomes
but the system states it as full whenever I try to add more data (tried cp and rsync). There is no quota set to the volume (I have quotas in place for users home folders. These are only for max amount of disk space, not max file number, and I am still able to move/add files elsewhere so there seems to be no interference).
My computer has Windows and Ubuntu operating system and each is located in separate partition (dual boot).Now the disk space of Ubuntu partition is about to run out. I wonder how I can increase the disk space of Ubuntu partition.
View 9 Replies View Relatedhave Debian "testing" installed. During the installation I selected to have a separate /home partition. / partition is ~10Gb, and my /home is ~300Gb. I didn't think I would need more than 10 for /.The other night, Debian informed me that I had 0 bytes remaining on /. I purged /temp an went about my day, only to be greeted with the message again the next morning.I've tried shrinking /home and increasing / via an Ubuntu live CD with GParted, but for some reason it did not want to work. However, I am beginning to suspect that my /home folder is occupying the / partition, and not the separate /home partition.Output of fdisk -l
Code:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1216 9764864 83 Linux
/dev/sda2 1216 38914 302803969 5 Extended
/dev/sda5 1216 1974 6082560 82 Linux swap / Solaris
/dev/sda6 1974 38914 296720384 83 Linux
I'm running mythbuntu 9.04 and am having an issue with disk space.
I try 'rm' various log files but the space I free up lasts less than a minute before the disk reports as being full once more.
df -Th | sort gives:
Quote:
/dev/sda1 ext3 8.3G 7.9G 0 100% /
/dev/sda6 ext3 138G 125G 6.3G 96% /music
/dev/sda7 xfs 783G 617G 167G 79% /videos
/dev/sdb2 xfs 344G 242G 103G 71% /recordings
[Code]....
There's nothing enormous in /var/log and my trash and the root trash are empty.
why size and used fields are not the same despite 100% usage being reported on sda1..
I've been getting error messages indicating my disk might be full, but I don't really think it is. It is so bad that I could not log on via Gnome, but fortunately I was able SSH into my box. Once in, however, I can't even create a directory!
View 14 Replies View RelatedI downloaded the Lubuntu iso from http://lubuntu.net. It is 521MB.How much disk space would a full install use? 2GB? 3GB?
View 3 Replies View Relatedran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
View 1 Replies View RelatedToday I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
My main storage partition got full, so I'm deleting files to make room. However, df -k keeps reporting no space available on that partition (/disk). Here's the output of the command several minutes apart while another process is deleting a 30G of space:What can I do to make the space available immediately?
View 4 Replies View RelatedFound what takes space but not sure what to delete here is the output of df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.2G 157M 8.6G 2% /
/dev/sda5 9.4G 9.4G 20K 100% /usr
/dev/sda6 213G 213G 20K 100% /var
none 1.0G 12K 1.0G 1% /tmp
tmpfs 2.0G 0 2.0G 0% /usr/local/psa/handlers/before-local
How to identify what to delete to clear up space?
I can't seem to fin the command that tells how much space is used/free.
View 5 Replies View RelatedI am having trouble with my HDD.
Here is how Disk Usage Analyzer looks like:
But I can not find any files there to delete.
Trash is also clean.
create a partition seperate from my home directory out of it. i have a 500 gig hard drive and i wish to create a 70 gig partition on it on install i used entire disk is there any way to make a partition after this for i do not want to reinstall.
View 3 Replies View RelatedI have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
if there was a way, to add a folder to a hard disk which was full of symlinks to a CD drive. This would primarily be a way to store offline media and a way to access it. I would still be able to browse the folder structure and see the files (but possibly not the sizes). I imagine something like this:
/archive/cd/cd1/photos/me.jpg > /mnt/cdrom/cd1/photos/me.jpg
Therefore I can see what files I have available, and I know which media to insert (in this case cd1) and I would then be able to view the files? Or if anyone has a better idea I'm open to it. Just to mention I don't have a GUI on this server, it is completely headless so any solution needs to be console based
I recently bought a new pc and installed Ubuntu on it. It came with a 500gb hard drive and during installation I manually partitioned it as follows:
10 gb (ntfs) for a windows partition
15 gb (ext4) mounted on /
4 gb for swap
the rest (470gb - ext4) mounted on /home
I've just installed a few apps from the repository, nothing big (about 500 mb in all), but in the 'file system' tab in 'system monitor' it says that for /home I have a total of only 432 gb, of which just 408 gb are available, with 500mb used. According to this, around 60gb of space have just vanished into thin air. Where did all this missing disk space go? The disk is brand new and there are no bad sectors in it.
I am the sole user of my laptop and i have the following hard disk space
Code:
Device Directory Type Total Free Available Used
/dev/sda7 / ext4 18.8GiB 15.4GiB 14.5GiB 3.4GiB
/dev/sda8 /home ext4 33.5GiB 7.2GiB 5.5GiB 26.3GiB
Now i want to use the free space in /(root) by moving files there.But i cannot create a folder or file in /.How do i go about this?
I have a single PC that has two hard disks in it. One is 250GB running Debian linux; the other 1TB running windows. I was switching between the two by going to the BIOS and changing the order of the hard disks to boot from. Both lived happily together in peaceful co-existance. Until....
Lately, I haven't been using Linux, so I decided to convert the 250GB to windows. So I put in the windows install CD, and it all started working fine, but when it came down to setting up a partition, Windows only recognized 130GB (out of the 250GB). I got confused so I decided to re-install linux. Linux recognizes the full 250GB; it recognized that there is a second hard disk running a different OS so the grub gave the option to boot from windows. So after a couple of reboots from both drives I decided to go ahead and install windows on the 250GB. Well again, windows only recognized 130GB, but this time, windows showed me another hard disk again with 130GB capacity. Apparently I stupid enough to proceed so now both hard disks - the 250GB and the 1TB - have capacity of 130GB each. And this is where I'm stuck.
I have tried fdisk, I have tried debug, but for some reason, windows can only recognize 130GB out of the entire disks; linux on the other hand recognizes the full capacity. I also used the seagate disk diagnostic tool (seatools for MS DOS) and it found no errors on either hard disk.
How can I reclaim the full capacity under windows?
I wonder if this is possible to extend or regrow the Linux hard disk partition from 8 GB to 20 GB without losing the existing data on the partition ?at the moment this Ubuntu Linux is deployed on top of VMware and I've just regrow the hard drive from 8 GB into 20 GB but can't see the effect immediately.can anyone suggest how to do this without losing the data ?
View 9 Replies View RelatedI currently dual-boot Win7 and Ubuntu 10.04, before I came back on Ubuntu, I uninstall-ed many programs to free up some space. Before I restarted my computer to boot back into Ubuntu my Internal HD had 43.5GB of free space, and when I booted into Ubuntu I checked the free space and it only showed 7.9GB of free space, did I check the wrong thing? Is 'File System' the Ubuntu equivalent to the C: drive in Windows?
View 9 Replies View RelatedI have a 1 TB hard disk(external). When i see the properties of hard disk ,its showing
total---931.5 GB
used----916.9 GB
free----14.6 GB
When i see ,using disk usage analyzer,its showing: total---832.7 GB
Is there any way of getting back free space?
I am attaching screen prints of properties and disk usage analyzer.
I recently decided to wanted to switch from windows to ubuntu 11.04 since linux can do the same work as windows for me. While going with a fresh installation of linux by itself I noticed that instead of my original laptop hdd space of 350gb it said allocated 320gb. I went with the install and now that it is ready the disk manager says I have 280gb space what is this please? Should I reinstall ubuntu to get the missing hd space ?
View 3 Replies View Relatedrunning ubuntu 8.10 amd64 on my HP intel 2.26ghz dual core processor, 320gb hdd and 4gb ram. My main problem is that when I dual booted ubuntu onto my laptop, I had vista already installed, so I only set aside 20GB of hard disk space for ubuntu, which seems like more than enough to me. What's going on is that it says I have used all my space and only have one GB left, when the only thing I have on my computer are word files and necessary installs like flash player, compiz, avant, etc.When trying to hunt down what was using all my space, first I checked out the disk usage analyzer (some pics from here in):theres my hdd with 1/19 gb remaining here's a breakdown of my home folder, showing that it's not using very much at allhere's my filesystem, now we can see that all the space is being used in the folder: /var
View 9 Replies View RelatedI'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
This question is somewhat open ended, so I'll describe the specific issue, what I want to accomplish in general, and what I tried to do. It'd be a little long, but hopefully not too daunting.For quite a while my approach to multi-OS boots has been to install each OS to a separate disk. When I want to boot a specific OS I change the boot drive in the BIOS. I find this convenient for several reasons, but mostly because I don't get boot manager conflicts. If I remove a disk or change the OS on it, this doesn't affect the booting of other OS's.
Note that when I say multi-OS, this meant until now multiple versions of Windows. I've occasionally tried some linux distros on VirtualBox, but now I want to do a full install, and see if I can use it as a main OS. (What prompted this was the recent release of Wine 1.2 and the fact that my new job doesn't involve any Direct3D or DDI work. I've always been partial to the open source movement, but I'm also fine with Windows and never before felt I could make the move without losing key abilities). My plan was (still is, if I can get it to work) to use Linux for everyday e-mail, web browsing and such, play Windows games over Wine, and install Windows 7 in VirtualBox for Windows development.I currently have two disks, one with my main Vista x64 installation, and the other with a Vista x86 installation which I used for my previous job and I no longer need. This is the disk I want to use for the Linux installation. It has a lot of partitions but quite a bit of free space (since I copied a 80GB disk and 250GB disk into a 500GB disk and haven't taken advantage of the extra space).My first choice of distro was Linux Mint, since it's known to be friendly to new users, and I like the software installer on it. I installed Linux Mint in the past in VirtualBox, and the latest version also installed fine, and I found installation instructions explaining how to provide my own partitions, but the installation failed during the "configuring hardware" stage. If you're interested, more details are available in this thread on the Linux Mint forums. I didn't get any reply to that thread.
I thought then that I'd try openSUSE 11.3. The live CD looked usable enough, but when I tried to install I couldn't tell how to make sure that I don't get a boot manager which will try to give me access to the Windows versions on the disks. I don't want this, and what I'm really afraid of is that an install will screw the booting of Vista x64 on the other disk (which, granted, I can disconnect for the install, but I'd rather not). At that point I decided to post a question here.So hopefully you understand what I want to achieve. I don't much care which Linux distro I install, but I'd rather have one which gives me as much usability out of the box (or easily installable) as possible.
I opened a thread but I think it was on the wrong place. Anyway I have a problem with harde disk space, here it is: I got a new server and checked for empty space after isntalling some stuff. here is the result:
Code: debian:/var# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 455G 47G 385G 11% /
[code]...
Can some one tell me how many space does a plan CentOS 5.4 take and the minium size of the memory.
Also, what is the minium size I have to partition on /boot
I opened this thread in Ubuntu forums with no luck at all. Hope someone can give me a clue of what happens.URl...Recently, gnome has been warning me about low disk space, always less than 1.5GiGs. The problem is, baobab (disk usage analyzer) tells me that there are something like 50GiG free. I am sure that I have the free space ( I can write big files ) but the system keeps reporting low disk space.
View 4 Replies View RelatedWhen level 3, we can use only command. What can I do to check for Hard Disk usage such as used space, free space, total space.
View 4 Replies View Related