have installed btnx-config however when i run it i get an error message error no code key file btnx-config needs the file/etc/btnx/events to run . make sure you have installed btnx first and that the file exists.
what i need to do to sort this out. i aqm using ubuntu 9.10 trying to configure mouse buttons
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
I have followed the instructions at http://www.vcn.bc.ca/~dugan/setting-up-slackware.html (under "Making Firefox Perfect"), but I still get the error message"Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
View 13 Replies View Relatedhow do you config ubuntu to work with multitouch... like Utouch?? using ubuntu 10.10
HP Touchsmart iq800s
I've been using an old modem from 2007, which my ISP calls Type I. It didn't have wireless connectivity and I used pppoeconf to setup my connection - username and password and set it to connect at boot time and everything was fine till today. I bought a Type II modem from my ISP and had to return the type I modem to them. Since the technician had no knowledge of Ubuntu (or Linux in general), he configured the modem in Windows 7, tested that the connection was working, tested the wireless connection in my netbook running XP and then he left.
Now I can't connect through pppoeconf in Ubuntu (running 9.10). The terminal says eth0 is listed but the 'access concentrator' or something like that isn't responding (no other process was running at that time). I feel very vulnerable while browsing in Windows so I want to get back to Ubuntu ASAP. Oh, and here's the output when I run "dhclient eth0"
Code:
Listening on LPF/eth0/00:16:76:33:d2:70
Sending on LPF/eth0/00:16:76:33:d2:70
Sending on Socket/fallback
DHCPDISCOER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 192.168.1.5 from 192.168.1.1
[Code]....
When I click on System Administration Display I get the root pasword entry. I enter the root password and then nothing. I stumbled on another way to set the resolution before but I can't find it now
View 5 Replies View Relatedsystem-config-samba doean't work from terminal neither it is shown in graphical mode, i cannot see system > administration > servers. Server is missing.
View 1 Replies View RelatedAm I right in thinking that the system-config-httpd tool doesn't work in Fedora 13?
View 1 Replies View RelatedI would like to set up three directories-
1) RW public directory
2) R-public, RW-me
3) Private dir (my /home/me)
BTW, I set all file permissions (recursively) to 777 until I can get this to work...
1) So far I have got 1 samba share working Read only with the following: [Music]
[Code]...
Guests can read it okay but user 'JoeBleaux' can't write to it...
2) I can't get the public read-write dir to work, again, it can be read by everyone but no one can write to it. Here's my broken config for this share: [Uploads]
[Code]...
3) I can't get the private dir to work. Here's my broken config for this share: [HomeDir]
[Code]...
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies View RelatedI wrote a GRUB multi-boot configuration so I can boot multiple distributions and have storage space on one 32GB flash drive.
set imgdevpath="/dev/disk/by-label/multiboot"
Code: Select allmenuentry 'Debian Jessie amd64' {
set isofile='/iso/debian-8.0.0-amd64-DVD-1.iso'
loopback loop $isofile
linux (loop)/install.amd/vmlinuz
initrd (loop)/install.amd/initrd.gz
}
This works in virt-manager when I boot the physical usb device a virtual disk with a usb bus and it works flawlessly, but when I plug it into a physical machine the cdrom detects fails to mount /dev/sdb1 as fstype=iso9660.
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedI was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
I am running a server with a GRSecurity patched Kernel 2.6.32.36. I've tried to optimize the kernel as much as I can and know it (removing options, not needed drivers and so on) and compiled the modules into the kernel (no loadable modules anymore). I've started with Slackware 13.0 and the default config for 2.6.29.6-huge. Still I am not sure what to remove/optimize further now.
My question: Is there a way to boot with a kernel with loadable modules, check which modules are really needed for this hardware, (do something like lsmod) and save the running configuration modules for a next kernel compile to be the default .config instead of writing them down by hand and search for the appropriate names in .config or during menuconfig? (Note: zcat /proc/config.gz > .config is NOT the way I want, as it gives me just the current kernel config)
I currently can run an old swf on my Chumby 8 device by storing and using these three files on a USB plugged into the device
config
<?xml version="1.0" encoding="utf-8" ?>
- <config>
[code]...
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI recentled upgraded all the packages on my server and now I have an issue where I can't get any thing to install or uninstall do to errors, This is what I get:
praetorian@praetorian:~$ ps ax | grep dpkg
7330 pts/1 Ss+ 0:00 /usr/bin/dpkg --status-fd 21 --configure bind9 cups cups-bsd
7331 pts/1 S+ 0:00 /usr/bin/perl -w /usr/share/debconf/frontend /var/lib/dpkg/info/bind9.postinst configure 1:9.7.3.dfsg-1ubuntu2
[code]....
How do I view a config.log file?
When I enter ls config.log is listed.
When I type 'type config.log' it says no such file as config.log !!
The service config tool is missing. the tool let you config what service need to be run/disable in what run level. but I can't find it after I upgrade to 9.10 at all.
View 2 Replies View RelatedI want to start empathy with a different config directory, but I cannot find how to do it. For example, with Pidgin I used to do it doing 'pidgin -c path-to-folder'. Does anybody know if it's possible?
View 2 Replies View RelatedMy .zshrc and .zsh/functions/prompt_fhsm_setup have been the same for a long time. I recently upgraded from Hardy to 9.10 and have started having a problem with my prompt. The error is:prompt_fhsm_setup:32: bad math expression: illegal character: I think the line referenced is:prompt_gfx_hyphen=$'xe2x94x80' but that doesn't seem like a likely cause.Here's the whole file
Code:
# fhsm prompt theme
prompt_fhsm_help () {
[code]....
I would like to compile my own kernel. I am familiar with how to do it and have done it in the past so I'm not looking for a how to compile a kernel. In the kernel config are many, many options. In the past when I compiled kernels I always wondered about what is needed and used. What is the best way to determine what is currently used, not set or enabled in the existing config, but actually used by my existing kernel?I have a general idea of what is loaded and could do trial and error, turn this and that off, recompile, etc but is there an easier way?
View 3 Replies View RelatedI run 6 machines at our local library with Ubuntu Lucid. Here is a problem. We use a network printer accessed through the ethernet cabling system. It isn't attached to a computer. I want to set it up so the Ubuntu computers find it by ip address, it has a static address. Then I would like to lock down the printer config as each week other printers show up there, all basically the same printer but only works if the patrons pick the correct iteration of it and it doesn't always stick to the default option I haver set up. So people get confused and then pick another one and no prints. I want them to click print and bingo only one printer shows up and it is the ip address I have set up. Ubuntu seems to love to add numerous copies of printers and in this situation it is creating havoc. So can I somehow set a command to lock the printer config and eliminate all this confusion? I hope this is clear as it is a fairly complicated issue.But is reflecting poorly on Linux to people who come in and I want it to b e very stable.
View 9 Replies View RelatedI was trying to disable touchpad click, added a section to /etc/X11/xorg.config, and now the OS never starts up, the laptop just runs... This is my second day with the machine, I've done a ton of setup but haven't yet setup a backup utility... is there any way for me to just go in and change the file back to the way it was?
View 3 Replies View RelatedHow to get the touchscreen working in Ubuntu 10.10 on Archos 9? I have so far managed, through reading various threads on various forums, to get the screen working as a touchpad with the axis inverted and flipped. The optical track-pad and mouse buttons on the left are also working. The eGalaxTouch application loads but gives me a message "No Touch Controller Found" before going into an about screen.
View 1 Replies View RelatedHaving trouble getting nptd to sync with time server(s) under 10.10.Using exact same /etc/ntp.conf with 10.04 machines on same network, have no problem:
root@goober:~# ntpq -p
remote refid st t when poll reach delay offset jitter
================================================== ============================
[code]....
I just installed Ubuntu on a partition install. It is dual-booted with my Windows 7. Anyways, everything worked fine for a while, until I pressed ctrl+alt+F2. Then it went to this weird full-screen-mode command line thing. It asked for my login so i did, and then it asked for my password, which I then entered. And then I really don't know what I did, but at the end I pressed ctrl+alt+delete, which instead of going to like a task manager, it restarted my computer.
I then booted into Ubuntu again, and it started giving me errors about how it won't update some config files, and then it won't load up like the desktop and the panels. All I see about booting is the default Ubuntu background when you login and nothing else. No panels, no icons, nothing, just the background.
My brother owns a chain of photo studios and we've just converted the computers over from Windows Vista to Ubuntu 10.10
We're setting up a wireless router at one of them right now and I can't log into the router via chrome or firefox by typing in 192.168.0.1
It just tells me there is no network connection. From what I remember I don't need internet to connect to the router to configure it.
On windows or osx it's generally a plug and play operation to getting the wireless all setup and secure.
I want config ubuntu to send mail with sendmail. Any manual for cinfig sendmail in Ubuntu.
View 4 Replies View Related