My .zshrc and .zsh/functions/prompt_fhsm_setup have been the same for a long time. I recently upgraded from Hardy to 9.10 and have started having a problem with my prompt. The error is:prompt_fhsm_setup:32: bad math expression: illegal character: I think the line referenced is:prompt_gfx_hyphen=$'xe2x94x80' but that doesn't seem like a likely cause.Here's the whole file
Code:
# fhsm prompt theme
prompt_fhsm_help () {
[code]....
When I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedI used Update Manager to upgrade an NVIDIA-based machine from version 9-something to 10.04.
Windows now have NO titlebar !
If I screw around with Visual Effects, the title bars come back but only temporarily and system video display is extremely sluggish. CPU usage is very high due to some process named compiz or xcorg. Upgrades always seem to self-destruct, is this fixable?
During upgrade the system ask me what to do about config files. K to keep old ones then other options to change config files to the new system and backup old one with *.old extension and 2 other options I don't remember. What do you think is the best choice if I have changed my xorg.conf, my layout and my fonts.
View 2 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
I just upgraded an 11.1 install to 11.2. The upgraded system appears fully functional but I get many "all config files need .conf" warning messages during boot. See below. I also did a clean install on another system to compare and the clean install does not exhibit the same behavior so the warnings are evidently related to it being an upgrade. The system's working but I would like to understand why this is happening and clean it up. This system provides some key services to my networks and I have spent a lot of time getting this and the systems it interacts with "just right" under 11.1 and I am not particularly interested in starting over except as a last resort.
View 2 Replies View RelatedI am using ubuntu 9.10 and I updated by ubuntu machine. It updated but at the end it gave me a message that "You have new mail in /var/mail/root". When I checked it via the command "tail /var/mail/root" it showed me this.
tail /var/mail/root
X-Cron-Env: <SHELL=/bin/sh>
X-Cron-Env: <HOME=/root>
X-Cron-Env: <PATH=/usr/bin:/bin>
X-Cron-Env: <LOGNAME=root>
Message-Id: <20100318051502.0D1ABB1C01@Infosec-Lab04>
Date: Thu, 18 Mar 2010 10:15:02 +0500 (PKT)
WARNING: "MaxBytes[leased]" not specified
ERROR: Please fix the error(s) in your config file
Trying to compile DOSbox version 0.70. Apparently this is the only version that can run Privateer flawlessly.Problem is, when I extract the source and try to './configure', I get an error that SDL 1.2 is not installed.
Code:
anthony@anthony-1010:~/Games/DOS/dosbox-0.70$ ./configure
checking build system type... i686-pc-linux-gnu
[code]....
I have a Dell Inspiron 5160 with a volare xp5 video card (only recently supported under linux most linux distros and OpenBSD)Thus far I have done graphics install of KDE based on 11.2 and -- froze end of install and at at the logon / splash screen dueing the reboot could not get to a successful run level 3 text logon. (commandline was vga=x317, I think if n ot it was closeInstalled gnome using text install -- first boot (vga=normal - (default from install)) succeeded at configuring X and started gnome.
I really want KDE so I tried again Text install == hung near the end of the install after printers -- I assume trying to configure XRebooted no command line parameter at all ( no vga=) -- hung at login password screen (blank)Rebooted again with -- vga=normal 3 -- and got a text mode login prompt and successfully logged in -- now I can not find the page that talks about sax2 configuration from run mode 3. This video card needs to be set for VGA I think maybe vesa at 1024X768 16 colors (I succeeded at this under OpenBSD)I believe if necessary I can probably successfully edit the x config file but I would like to try the recommended approach first (as a non-root user as recommended) -- can anyone direct me to that page I cannot find again. It discussed 11.3 x config recovery with a section at the bottom for 11.2 and earlier
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
I'm trying to boot Ubuntu from a LiveCD in a computer I recently bought that currently has Windows XP on it. The Ubuntu menu comes up when I boot but it always snags on an error "failed to restore CRTC configuration -22" or something like that, and just goes on ad infinitum.
I tried running Linux Mint too and had the same problem, which makes me think it's an issue with the computer itself - which is an Averatec, if that helps.
I installed tinyos-2.x in Ubuntu lucid. I tried to simulate tossim environment for simple Blink application using the command: make micaz sim and ended up with the following error:
mkdir -p simbuild/micaz
make: python2.5-config: Command not found
make: python2.5-config: Command not found
make: python2.5-config: Command not found
and
Python.h: No such file or directory
and
make: *** [sim-exe] Error 1
Eventually installed python-old-doctools package which supposedly includes python2.5-config package but alas! It doesn't compile yet.
Running natios server in Debian 8? I cannot start nagios3 demon, it got following error:
Error: Check period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
Error: Notification period '24x7' specified for service 'check ssh connection' on host 'testk2' is not defined anywhere!
But if I commented following statement in generic-service_nagios2.cfg, it works just fine.
# check_period 24x7
# notification_period 24x7
When logged in as my standard user in Fedora 11 gnome desktop the installed ntfs-config tool will not open and gives an error which says this; "no authentication program found", and to run that ntfs-config as the root in a terminal. So then the only way to open that tool is to type that in a terminal, and it did open, but how can I fix this ? Can this issue be related to ownership and permissions of it ? Also the num lock does not come on during boot up, is there a easy fix for that too ? This is a recent fresh updated install from the DVD with the ext4 file system. All the ntfs-3g applications are installed as default, so I just added that enable ntfs write support tool with the package manager.
View 2 Replies View RelatedI have configured a virtual host. Here is what I have did,
<VirtualHost rubby.tob.net:80>
ServerAdmin root@localhost
DocumentRoot /var/www/html/
ServerName rubby.tob.net
# ErrorLog logs/dixie_error_log
ErrorLog syslog | local8.*
CustomLog logs/rubby_access_log common .....
The problem here is how to point the error log to syslogd. Here is my syslog file,
#vim /etc/syslog.conf
og all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.* /dev/console
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages! .....
If I point the file, separatelt at httpd.conf for the errorlog, I'm getting the errog log. I'm using Centos 5.6.
I had a RAID controller in a system that would not load Virtuozzo. So I deleted the array created by the 3Ware 9550SX controller before removing it and one drive from the CentOS 4.8 server. Even though I deleted the array when the server boots it shows an error:
ERROR : asr : invalid RAID config table
How can I clear and remove the table without having to reload the OS? Can I? Di I need to run the Seagate Tools and reset the drive?
I am trying to change the configuration of sendmail so that I can relay mail through google smtp server as suggested here.
First I ran 'm4 sendmail,mc > sendmail.cf' with the original .mc file that came with Fedora 10. There was no error.
I added the following lines.
Quote:
TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl
FEATURE(`authinfo','hash /etc/mail/auth/client-info.db')dnl
define(`SMART_HOST',`smtp.gmail.com')dnl
define(`RELAY_MAILER_ARGS�, `TCP $h 587′)
define(`ESMTP_MAILER_ARGS�, `TCP $h 587′)
I ran ''m4 sendmail,mc > sendmail.cf' again and got this message:
Quote:
m4:/usr/share/sendmail-cf/mailer/procmail.m4:33: ERROR: end of file in argument list
I did not change anything in the procmail.m4 file. What do you think caused this error?
I'm trying to install "ktranslator-0.4" on my slackware64-13.0. When I type in ./configure I get the following mesgs with error:
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
[code]....
I'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
I installed debian 6 (stable) on laptop with dual boot Windows 7 and Debian. when i was installing debian ,every things were ok and installed correctly (such as DHCP configuration) before installing APT package configuration part. error is about mirror zone! i checked it and tested with all mirorrs in list but i couldnt config APT yet.i did installation without APT.after booting debian i have apt-get and aptitude commands but didnt work commands like apt-get update or aptitude install ... or aptitude update .... when i ping an ip , it dosent answer cause of errors .(but i have network connection on windows7 correctly. im using connection wired.
View 1 Replies View RelatedI'm trying to install and configure a printer (networked Brother HL4040CN), but I'm getting an error dialog when I click on "New" in the printer configuration GUI.
Action 1) Click on "New"
Response 1) a) "Authentication (fetching device list)" dialog box, request password for root.
Response 1) b) "Returning HTTP Forbidden for CUPS-Get-Devices (no URI) from localhost" appended to /var/log/cups/error_log
A2) Type root password and press enter in "Authentication" dialog box
R2) a) "CUPS server error" box, "There was an error during the CUPS operation: 'server-error-internal-error'.
R2) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:14:12 -0400] Unable to execute /usr/lib/cups/daemon/cups-deviced: insecure file permissions (0100777)
E [17/Jun/2009:08:14:12 -0400] Returning IPP server-error-internal-error for CUPS-Get-Devices (no URI) from localhost
A3) Click "OK" button in "CUPS server error" box
R3) a) "New Printer" dialog box opens
R3) b) /var/log/cups/error_log:
Code:
E [17/Jun/2009:08:17:10 -0400] Unable to execute /usr/lib/cups/daemon/cups-driverd: insecure file permissions (0100777)
E [17/Jun/2009:08:17:10 -0400] Returning IPP server-error-internal-error for CUPS-Get-PPDs (no URI) from localhost
A4) Enter "lpr://192.168.1.2" and click "Find" button under "Seelct Device->Network Printer->Find Network Printer"
R5) "No printer found at that address."
Any ideas? I have installed the RPMs from Brother's web site for both LPR and CUPS-wrapper
I'm trying to install kmplayer-0.10.0c and im using Fedora 9. when i tried to install the kmplayer-0.10.0c using the command ./configure i received this error msg "The important program kde-config was not found!. Please check whether you installed KDE correctly." Kindly help how to solve this error msg.
View 2 Replies View RelatedInstall problem: no acceptable C++ compiler found in $PATH (Trying to install freeciv, game) ... checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking whether the C++ compiler works... no configure: error: in /home/peter/Download/freeciv-2.2.1': configure: error: no acceptable C++ compiler found in $PATH See `config.log' for more details. Other threads suggest install gcc which I thought I already did yet it didn't solve the problem!
View 9 Replies View Relatedi was installing php5.3 on my system nd i followed d procedure
./install after processing man lines it said checking for xml2-config path... configure: error: xml2-config not found. Please check your libxml2 installation.
[Code]...
I am getting a strange font problem (see attached screenshot) for a user logging in over VNC Server, I am also logged in over VNC however I am no experiancing any problems... This was the case on CentOS 5.3 and on 5.4. I have tried removing the .vnc dir in the users home dir and re running vncserver so that it recreates it, I found this in the logs:
1. (nautilus:14718): Pango-WARNING **: No builtin or dynamically
2.loaded modules were found. Pango will not work correctly.
3.This probably means there was an error in the creation of:
4.'/etc/pango/pango.modules'
5. You should create this file by running pango-querymodules.
6.Fontconfig error: Cannot load default config file
[code]....
i try to run yum update and now i get this error Config Error: File contains no section headers.
[code]....
When I run from the command line, I get this output:
Traceback (most recent call last):
File "/usr/sbin/system-config-samba", line 45, in <module>
mainWindow.MainWindow(debug_flag)
File "/usr/share/system-config-samba/mainWindow.py", line 82, in __init__
[code]....
I have removed and re-installed and get the same crash.
I am trying to install syslog-ng-3.0.2 on Fedora 12 and have run into an issue I don't know how to solve. When runing the "configure --enable-ssl" I get the following "checking for pkg-config... (cached) /usr/bin/pkg-config checking pkg-config is at least version 0.14 checking for GLIB - version >= 2.0... 2.0, bad version string no configure: error: Cannot find GLIB version >= 2.0: is pkg-config in path?" I have glib-2.24.0 installed on this system so I don't understand where this issue is coming from or how to fix it.
Back ground on my system -
[root@syslog-ng]# set PKG_CONFIG=/usr/lib/pkgconfig
[root@syslog-ng]# export PKG_CONFIG
I'm using Conky in my Ubuntu 9.10 Karmic. I have an error message like this:
Quote:
Conky: border_margin is deprecated, please use window.border_inner_margin instead
Conky: one or more $endif's are missing
Conky: desktop window (1a00065) is subwindow of root window (10d)
Conky: window type - override
code....
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
