When I installed Ubuntu, I installed the Hardy Heron version. I kept on forgetting to upgrade my system when a new version of Ubuntu came out and now I am considerably behind. I want to upgrade to Karmic, but I can't find out how to do it without upgrading to Impala, then Jaunty, then Karmic. Is there a possible way I can avoid upgrading three times and only do it once?
View 3 RepliesI have a dedicated server running Ubuntu-server Jaunty. As you know, this OS no longer has security updates. I'm trying to upgrade it to the latest LTS (Lucid) but first thing's first: I'm having trouble upgrading from Jaunty to Karmic.
Here's the problem. I get the following when I try do-release-upgrade:
Code:
$ sudo do-release-upgrade -d
Checking for a new ubuntu release
Done Upgrade tool signature
Done Upgrade tool
[Code]....
force an upgrade to Karmic instead of Lucid? (And no, sadly, re-installing is not an option as this is a server with no direct physical access)
if i downgrade to the Jaunty version of ubuntu(and i mean wipe my hard drive and start from scrach) then update to Karmic can i still keep some of the features of Jaunty?
View 1 Replies View Relatedi used the Update Manager to upgrade from 9.04 to 9.10.. then it said:
NO VALID MIRROR FOUND
While scanning your repository information no mirror entry for the upgrade was found. This can happen if you run a internal mirror or if the mirror information is out of date.
Do you want to rewrite your 'sources.list' file anyway? If you choose 'Yes' here it will update all 'jaunty' to 'karmic' entries. If you select 'No' the upgrade will cancel.
I choose yes, then is said that there's something wrong with the network I'm connected to..then it closes..the upgrade failed.
Ubuntu Jaunty i386 server used 8% of the available 2GB RAM. After upgrading to Karmic, usage is now at 30%.Seems many more mysqld instances running
View 8 Replies View RelatedI have Ubuntu Jaunty and would like to upgrade to the latest Ubuntu 10.10
View 7 Replies View RelatedSince yestarday, wireless net stop working with my laptop hp compaq 6720S, dual boot vista/karmic.
In jaunty i had the gnome network manager fully working.
When i upgraded to karmic (last october), gnome network manager connected and disconnected the wireless all the time, doing internet unusable.
I fixed the problem installing wicd. I had wireless fully working.
But since yesterday, wicd cannot obtain ip address from wireless and when it can, connects and disconnects net all the time (behaving like gnome network manager). I have reported the problem in this network and wireless forum but yet i cannot obtain answer.
Well, my question is, as gnome network manager from jaunty worked, could i install this gnome network manager release in karmic to fix wireless?.
I need to upgrade Pulseaudio to a version better than 0.9.14 (i.e. at least 0.9.15) in order to get the Pulseaudio plugin in Blueman to work, but despite following these instructions to add the PPA it will not be upgraded!
View 7 Replies View RelatedI have a working system running Jaunty. For various reasons I want to move to Karmic, but I don't want to use the "upgrade" feature in the software update manager. I need to swap some hard drives around, so I want to do a fresh installation. My question is, what is the easiest way to "migrate" a user to a fresh installation? On a Mac you can simply run the migration tool and it moves everything into place with relative ease, whether from a backup drive or from one computer to another. Is there any analogous program in Ubuntu? Or is it just so simple that such a program is unnecessary?
View 1 Replies View Relatedi havent really had a chance to ask this for a while, but im in a bit of a bind. im trying to do a release upgrade of 9.04 through to 10.10. I'm stuck at getting karmic to reboot because of a grub problem. I keep getting "error 15" file not found. Not one single forum post has helped for some reason which is strange. Release upgrades have always worked even though not recommended, but this one of all has been the worst of the lot and totally insane.
Im testing in a vmware before i do this for real on the production server, I am using a raid1 setup and boot partitions set to md0.
my fstab after the upgrade before i reboot looked like this
# / was on /dev/md1 during installation
UUID=######################## / reiserfs relatime 0 1
# /boot was on /dev/md0 during installation
[Code]....
I tried to first install grub2, i confirmed it installed and worked perfect, and therefore removed grub legacy.
Ran do-release-upgrade , it completely uninstalled grub2, and it also fails at building /initrd.img-2.6.31-22-server and adding into the grub menu therefore the upgrade fails with this error. I reinstalled grub2, the menu came up fine but trying to load a kernel gave me something like
alert ! /dev/disk/by-uid/############## does not exist.
What is the go with this ? Ive been trying to make this work off and on for 6 months
I'm a newbie to ubuntu and I only used ubuntu less than a month, and I really like it. I would like very much to upgrade my ubuntu jaunty to ubuntu karmic but I have several concerns. If I choose to upgrade via update manager: 1. Will I lose my compilers and configurations? For example, some of my programs in current ubuntu are using gcc 4.3 and g++-4.3. I know that Karmic uses higher version of gcc and g++ and I have installed these programs in higher version of gcc and g++ and I got some problems. I would very much like to stay with my current compilers and configurations. I mean, do have to install all these previous version of compilers when I upgrade to Karmic? 2. What about my data in my home folder? Will it be erased? 3. What about my data in programs such as firefox? Will it too be erased? 4. What will happen to all third party software if I upgraded to Karmic?
View 9 Replies View RelatedOn a fully updated Ubuntu 9.04 system, I had successfully configured wvdial to connect using a USB modem ("Update" brand) with an ID of 067b:0611 (uses the pl2303 driver module). In considering an upgrade to Ubuntu 9.10, I tried a LiveCD and was unable to connect using wvdial. However, because I had made the CD a couple months before, I went ahead with the upgrade (via the internet; not a fresh install) in the hopes that it would end up working or I would be able to find a solution for it.
The Problem: The upgrade was a success as far as I could tell, but when I tried to connect to the internet with wvdial, I was not able to. I checked the wvdial.conf settings to make sure they were the same as before, added some new ones I thought it might need, unplugged the modem and replugged it, restarted my system, etc., but all to no avail. Whenever I would try to run wvdial to connect, I would get the following output:
Code:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
[code]....
This was different than the output I used to get with wvdial, but when I went over to my browser (Firefox) the internet worked fine. I'm assuming my email client and other things will work okay as well, but have not tested them as of yet.
A final touch I did to make connecting a bit less 'painful' was to right-click on the panel (at the top of the default Ubuntu screen), and click on 'Add to Panel'. Then I selected 'Custom Application Launcher', chose 'Application in Terminal' for 'Type', gave the launcher a name, pasted in that 'horrifically' long command line above, gave a brief description in the 'comment' box, then pressed 'OK'. Voila! I now have a launcher on my panel that with a single-click will bring up a terminal screen where I enter my sudo password and it connects. Then when I want to disconnect I just go back to that terminal, press Ctrl+C, which promptly disconnects me and causes the terminal to vanish into thin air.
Now, I don't know enough about this stuff to know why this command worked and wvdial didn't, but if you know, feel free to post a reply. Or if you'd like to see what settings I had for wvdial that worked in 9.04 but not in 9.10, let me know. Or if you think it's worth checking to see if this should be posted as a bug in either wvdial or Ubuntu, you can mention that as well.
I decided to try to do the 3 distro upgrade stretch from 8.04 to 10.04 this weekend and now I am hung on 9.04 to 9.10.. The upgrade went swimmingly, but I hit a wall upon boot. When I try to load kernel 2.6.31-22 I am greeted with the following error:
Code:
[ 20.879845] ACPI: I/O resource vt596_smbus [0x400-0$407] conflicts with ACPI region SMOV [0x400-0x406]
Mount of root filesystem failed.
A maintenance shell will now be started ... After doing some digging I found this thread which appears to be similar in the inability to mount the filesystem. However, it does not mention the ACPI error. I tried everything in that thread; verifying device ID's, editing fstab options; running a filesystem check, and flipping the UTC option in the rcS file but nothing worked. The OP of that thread eventually did a fresh install of Karmic; but I would rather not have to go that far.
When I use a package manager (aptitude or synaptic) to install updates to firefox (3.6), I get the following error:
[Code]...
After I upgrading from Karmic to Lucid, I haven't been able to update my version further and also running apt-get shows error... Can anyone tell me why this is happening?
[Code]...
I just upgraded to Karmic and since then, mouse and sound on my laptop stop working. I fixed the touchpad problem but no sound yet.
My laptop is a Presario CQ60.
Here's the audio relevant portion taken from lspci
Code:
I just upgraded from 9.04 to 9.10 then discovered that, in openoffice.org-writer, the text in the UI is gone. It's strange because the text to be edited is still there. So maybe it's a font or rendering problem but I suspect something related to the window manager is going wrong. I have checked and re-installed openoffice but I haven't been able to fix this so far.
View 1 Replies View RelatedBeen using since summer 2009 the xserver no backfill from PPA: [URL] and it was working fine with my ATI video card. No heavy CPU usage when restoring from minimized and a general performance boost were the results of that use.But recently made an upgrade and realized that xserver-xorg-core package (check it from synaptic manager) has been upgraded to a jaunty-proposed version and the problems started to appear again!So using Synaptic I selected this package and hit CTRL-E key in order to choose the nobackfill version. This way things got back to normal!
View 2 Replies View RelatedI have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
I recently got a Dell Netbook Mini10v with Ubuntu 8.04 preinstalled. It does not give the option to upgrade using the normal features in the GUI (as far as I can tell) how should I go about upgrading my system to 9.10?
View 2 Replies View RelatedError during commit 'E:Internal Error, Could not perform immediate configuration (2) on mountall' Restoring original system state
Yeah...that's what I get every time I try to upgrade to lucid lynx.
NOTE: I haven't updated for quite some time. I may have gotten one or two updates for karmic but that was it. Just thought it might be important....
NOTE: Also not sure if this is important, but karmic installed and did some funny stuff to itself. My desktop no longer exists. It just isn't there. Also, when I try to turn of my computer it gets all kinds of errors and eventually I have to just pull the plug....something about a dev loop0 right after is says its deactivating swap...
Getting a new computer today, as my usuall box is running karmic, will there be any problems?
Can i just take out, my drive with / and home on it, put it in and away we go or what? also what backup s/w is there to backup onto a hard disk.
ie existing root -> new 240gb root
I am a newbie to Jaunty, so please forgive my descrip. terminology. I am experiencing a great amount of grief with my Jaunty install. I can no longer get a login screen in Jaunty. When I try to boot normally for this install I get an unclean shutdown screen & it goes into the "checking drive" mode. I uninstalled some applications such as has to do with touchpad, remote desktop, xorg-driver-fglrx etc. I reinstalled xorg-driver-fglrx, which I later found out that I do not need. I have an AMD64 HP system with ATI graphics onboard.
I need to find out how to load graphic user interface in Jaunty. Some of the necessary files have been completely removed by me & I need to reload the repositories and update my current install.The partition is encrypted but I have been able to login with the username & password for THIS encrypted install using the "repair broken system" part of the GRUB screen.
How do I go into the terminal and load repositories, and maybe the kernel so I can do an update/upgrade? I do not know if upgrade is part of what I need to do I wanna keep my Jaunty install so I can access 50G of data that is on this install. I have made no backup of this data!!!
I am able to login to my install using my username & password after I get to the "#" prompt, (option "fix broken system" in GRUB) so I know login can be done under username of install. I just need to know what to TYPE into the terminal to restore the necessary files in the right place to make it run. (Is it called terminal at that point?)
I really want Python 2.6, which is not part of the standard Hardy packages. I just tried installing the Python 2.6 Linux distro direct from python.org. While I didn't see any error messages during the installation, I'm still defaulting to Python 2.5, and 2.6 installed to a different folder than 2.5.
A secondary wish: I would also like GROMACS 4.0 instead of 3.3. Again, Karmic has it as standard, Hardy doesn't.
I'm running dual hard drives in a software RAID1 configuration. My system is Linux only, so I have no Windoze compatibility issues to worry about.
Still, I've gathered that upgrading in the presence of RAID is different, and more problematic, than a standard upgrade.
I did an upgrade over the internet and on rebooting after it had completed there was no internet connection. I wired in an ethernet cable and although I can access the router and ping another machine on the network, there is no internet connection.
View 7 Replies View RelatedI installed Lucid (clean install after several attempts at upgrading from Karmic failed), and I have an Intel 8xx video card. I was able to get Lucid installed by adding "xforcevesa" into the command line at startup. Now I would like to try changing my computer away from Vesa and seeing if I can try to get the i915 driver working.
That being said, I cannot figure out where to go to change my kernel boot configurations. Every tutorial I've found refers me to /boot/grub/menu.lst which I cannot find. Ever since I moved from Karmic to Lucid, I've regretted it as it seems like all the How-To documentation is no longer valid, everything has been changed and moved around.
I don't know why it is dumping me onto Vesa, or why my stupid driver was blacklisted; everything was working fine under Hardy, Jaunty, and Karmic. Why problems now? Does anyone know how I can get into my boot setings and replace "xforcevesa" with something that will make the intel driver work?
I had a nicely working karmic 64bit/windows XP install, but the "upgrade" button to 10.04 has finally got the better of me. Now, when the PC boots up, the following failure occurs:Memory CheckPCI device listingVerifying DMI Pool Data ......error: no such device:e9eb88c2-67f2-47a7-bf9d-50b77b2d3480grub rescue>_Some more information.linux is on sdb1when I type "ls" I get: "(hd0) (hd1) (fd0)"however, I've not managed to get "ls (hd1,1)" or similar to do anything, the best I get is "error: no such partition".the command "find /boot/grub/grub.conf" results in the error "Unknown command 'find'"I've tried swapping the boot order in the bios from hd0 to hd1 but that has made no difference.There is no grub loader, no linux, no windows, no operating system of anykind, just the "grub rescue>" prompt.
View 9 Replies View RelatedI have just upgraded my OS from ubuntu 9.10 to 10.04.Now I'm facing problem of not having write permissions to USB drives (Pen drives).I have to use terminal with sudo to copy , move files and unmount media.
View 4 Replies View RelatedIf I try to open Cinelerra from the GUI, it does nothing. If I try from the terminal I get this:
Code:
cinelerra: error while loading shared libraries: libfaad.so.0: cannot open shared object file: No such file or directory
I've been looking around all over the place and can't find a way past this. I really want to get it going again, can anyone help?
I've checked in synaptic and I have libfaad2 2.7-4
when i upgrade my kernel my webcam begins to work (it doesnt work on this one), but my wifi stops working totally
View 9 Replies View Related