I currently use 4 keyboard maps in my session (Russian, Ukrainian, Polish and French). I'd like to use one more : Sweddish, but it seems that I can't have more than 4. Does anybody knows a way to bypass this limit?
View 1 RepliesI want to make specific keymaps for application, that working only in it and doesn't affect other apps.
For example, I already use my Caps key to toggle input language (via xorg.conf), but I want Capslock to behave like Esc in vim.
Looks like xmodmap doesn't have any options related to that.
my secure log is flooding with these messages..
sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'hard'
Dec 28 22:42:29 yn54 sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'soft'
Dec 28 22:42:29 yn54 sudo: pam_limits(sudo:session): wrong limit value 'unlimited' for limit type 'hard'
I have a VPS server with 512 MB memory. The php.ini is set so script memory limit = 16 MB. However, I have noticed in my top report, instances like the following:
Quote:
5484 coldclim 25 0 46476 32m 5920 R 0.0 6.4 0:00.93 php
The bold number of 6.4 is the % of sever memory this process is using. 6.4 % of 512 MB of memory is about 32 MB of memory, so it appears that this isn't being limited by php.ini. Am I correct? This leads to the next question: Is there some way to limit the amount of memory a single suphp process can use? (Basically, something like the setting in php.ini which limits suphp processes in the same way.)
I have 2 directories in my home folder that I would like to set a size limit on. The directories are ~/backup and ~/temp. Is there an easy way to limit the size of a directory without having to make partitions?
View 4 Replies View RelatedI upgraded my Ubuntu to 10.4 and when I boot it stops for 24 seconds at the boot menu then loads. This is the same menu you get on boot when you press Esc. How do I get Ubuntu to boot normal?
View 2 Replies View RelatedI have a persistent installation of 10.10 on a USB thumb drive installed with the Universal USB Installer. When I boot, it always brings up the welcome screen, with the languages on the left side, the big "Try Ubuntu" button in the center, and an "Install Ubuntu" button on the right. I just want to run ubuntu from the USB stick. When I click on "Try Ubuntu" the system hangs for 2-3 minutes, requires a force-quit and then brings up the desktop.
If, at the beginning of the boot process, I interrupt it bringing up the initial menu, I can select "English" then "Run Ubuntu from this USB", and it boots very quickly directly to the desktop. Before this install I was running 9.04 and later 10.04 from the same USB stick and had no issue with it booting directly to the desktop. Ideally I'd like to not need to intervene and just have load to the desktop. Do I need to make some changes to grub?
I realise that passwords are a good thing but I'm getting fed up having to enter a password just to get my wireless network to work every time I switch on Ubuntu or when I log out and back in again.
Seeing as there is nobody in the house that I want to keep away from the computer, is there a way to automatically sign-in to my wireless network without having that annoying key-chain popping up every time?
I'm running Ubuntu 10.10 off a desktop. I was using it for quite a while up until last night when out of nowhere while surfin', and browsing, the screen just turned white, I've tried restarting by powering off manually, as I couldn't get it to any other way. After the computer restarts, it might flash black for a sec a couple of times, then back to being white again, the BIOS screen doesn't even show up. It sounds like in the background the computer might still be loading up. My monitor is a 21"LCD, if that means anything?
View 2 Replies View RelatedYesterday I was working on Ubuntu, i shut down the computer normally, and then when i restarted it like an hour later i couldn't bypass the login screen. I insert my username & password correctly and the screen goes back for one second and then displays the login and password inputs again. I have just one username there. Before i shut it down i was trying to install Eclipse, so i messed around with some files related to Eclipse only, if that has anything to do with the problem. I also have Windows XP installed along with Ubuntu 9.10.
View 3 Replies View RelatedI have to enter the root password every time I want to run
Code:
sudo vpnc
and I know that there is a way to avoid entering password every time but I can't remember what it is.
I've read the documentation, but I'm still confused. I have two servers, one running Postfix and SquirrelMail, and another i want to setup a wiki(already setup) and Photo Gallery.On my Second server(2)I have two virutal webservers, wiki.rmasonfamily.info and photo.rmasonfamily.info, both running on port 80.My first computer is running my mail server again as a virtual server, mail.rmasonfamily.info. Default server is not used in either one.
Server 1 will be my proxy server, and if I understand correctly, my reverse proxy. Ubuntu had Apache set with a configuration in etc/apache2 using sites-available with configuration for each Virtual Server with sites-enabled with links to configuration files in sites-available. My Virtual Server in Server 2 are working fine, along with my mail server in Server 1. this is the code I assume I must use to bypass to wiki.rmasonfamily.info. In server 1, under sites-available, in the file wiki.rmasonfamily.info this is the code I put
<VirtualHost *:80>
ServerName wiki.rmasonfamily.info
ProxyRequests Off
ProxyPreserveHost On
[code]....
Doesn't work, I know I'm doing something wrong...
what is the acl type is used to bypass a website where to implement the rule?
View 3 Replies View RelatedI love My linux OS, and I carry It with me all the time in USB. I used to be able to boot from USB in the University computers, but not any more. Now it required Admin password in order to boot from CD or USB. I tried The VMWare, but I didn't like it. Is there any way I can get around it.
View 1 Replies View RelatedI tried a remote reboot via ssh. I couldn't log back in even though sshd is a startup script, because the KDE daemon wanted me to enter my kwallet password...which is of course part of the DE, not something accessible via ssh. How do I turn off that check or automate it?
View 2 Replies View Relatedpoint me at a free proxy to bypass this which can simply be installed, built and/or run.setting up a server outside china and running a tunnel to it from my comp is not an option. also, below is a list of sofware that i have tried and failed to work:
Tor with vidalia
Tun with squid (i think squid)
hamachi (which i later realized would never have worked)
i tried to get haystack but it wouldn't build.
PS: if this post is in the wrong area, please tell me where to move it...
Is there a way to bypass (and/or reset)the username/password when powering up?
View 3 Replies View RelatedI have installed Suse 11.3 on /dev/sdc which is a hard drive connected to a usb port. Windows 7 lives on /dev/sdb in the box. Another drive sda is in the box also. I configured bios to boot the usb drive first. Grub is installed on /dev/sdc mbr. My scheme is to allow me to boot directly to Windows if the usb drive is not powered up, and directly to Suse if it is powered up. That all works. However, I would like to bypass the grub menu and boot right into Suse, like what happens with Windows, not having to select an entry from that pesky grub menu.
What is the best way to configure the system so that this can work? I've done a lot of searching but there are too many grub horror stories in the haystack to find this particular needle. Also, I've had my share of problems recently after losing control of the boot process somehow and not being able to boot into Suse at all. All of the postings I found on the net about recovering from that turned out to be phoney in some way and I had to reinstall to bet better. I'd like not to repeat that scenario.
I am using FC11. My problem is whatever application that needs access to the internet are blocked by company's proxy server. So, configuration is like
my_machine---------> firewall ----------> outside world..google and etc
Now, If I am using firefox then I have configured it to use proxy server and required login details and etc. But, my eclipse, ssh, git and all those needs internet connection as well... Is there anything like which sets all details (proxy server, user name and passwd) system wide ? So that I dont have to pass it to each application...
I have a server that said a volume was dirty and to check it at reboot, so someone did a shutdown -rF now. Only problem is the other volumes are HUGE and it will take forever, which I cant have happen. The volume with the trouble is non-critical so I could take it offline and check it that way if i can get this to boot quickly. How can I do that if its going to auto check every volume on reboot now?
View 2 Replies View RelatedI'm using Fedora 10 as a proxy server using squid, but I recently noticed that some users use the IPS's Dns to bypass the proxy and surf the web freely. So my question is, is this a problem with Squid or perhaps I can solve the problem whit IPTables.
View 6 Replies View RelatedI've attached my squid.conf, I'm creating a proxy server along with a content filter for work using dansguardian and squid, recently my boss asked me to allow a few ips to bypass squid without being authenticated now i thought this config might do it but it seems to be reluctant to let this computer through without being authenticated
View 3 Replies View RelatedI'm running Ubuntu 9.10 as a web/ftp/etc server. I like to work on stuff from remote locations and have set it up to be accessed it with the external IP address by my laptop.The problem is that if I'm at a remote location and tell it to restart, when it boots up it won't log me on unless I enter the password, but I can't remote access it until I'm logged in.So, is there a command or script that I can run that will tell it to restart and bypass entering a login password?I'm only looking for something to bypass it ONCE per command/script, NOT to disable my password.
View 5 Replies View RelatedWhen there is an exploit in the kernal, can the iptables firewall get bypass? If yes,how do you know? Otherwise how can you find out.
View 9 Replies View RelatedI'm trying to jump Ubuntu Server 10.04.1 x86_64 on an HP DL360 G5. After loading the modules for install, I'm greeted with an iSCSI prompt that cannot be bypassed. Hitting Finish brings me right back to the same iSCSI prompt.The issue seems to be identical to y kickseed file is as follows:
Code:
#platform=x86, AMD64, or Intel EM64T
# System authorization information
[code]....
My router is crap. If I use DHCP it sets all the computers DNS to itself and all DNS requests get cached in the router. It even starts to loose some DNS request if to many are made at once. On my windows PCs this isnt a problem I just set DNS to google's public DNS servers (8.8.8.8 & 8.8.4.4) and bypass my router and ISP alltogether but when i go to pref>network_connections i have to either set DHCP or manual, there is no option to set DHCP with custom DNS.
I'm sure there must be a way to do this in terminal, can someone tell me how?
I'm using ubuntu 10.10.
installed dansguardian and now working fine.I got a small problem. People bypassing proxy settings in firefox, means they go to settings and changes proxy settings to no proxy.. how to prevent this? How can I force people to use proxy to connect Internet? I done some googling but, unable to find a solution.
View 3 Replies View RelatedI have a lifttime premium account at Megaupload.com. Recently I found that megaupload has blocked all IPs in my area. I have sent emails to their tech but nothing has returned!!I have tried to use proxies to download stuff from megaupload, however, none of them works for suspected bandwidth reason, not to mention that it might be slow too.
View 5 Replies View RelatedIs it possible to bypass kdewallet manager for certain applications while leaving it in place for others? Specifically, I do not want to be prompted to open the wallet when I login and initially access the wireless network, but still require opening of the wallet to check email.
View 6 Replies View RelatedI am VERY new to linux and have managed to install Fedora 14, xmame.SDL and Wah!Cade and finally got it all working great! My final step in my setup is (since the only use for this machine is wahcade) to be able to switch the computer on and boot straight into wahcade...and eventually hide all traces of Fedora during boot. I have managed to get the login to Autologin by adding some lines at the end of /etc/gdm/custom.conf:
Code:
TimedLoginEnable=True
TimedLogin=username
TimedLoginDelay=0
However, I still get the login box but with "Autologin" on it which I have to click ok for or wait about 15 seconds and it goes away. (I was under the impression the timedlogindelay as 0 would be instant) Then immediately after that it still asks for a keyring password.
How can I just get rid of the whole login process (like a single user thing) and just have the thing boot straight to the desktop? Also, once I achieve that, how can I make it open wahcade? And can I remove all the icons from the desktop somehow?
Everything I have come across on tinternet seems to assume I know linux inside out so answering in dummy step by step terms is more than welcome. I have a programming background but I am unfamiliar with linux programs, plugins, terminal, terms etc.