I upgraded my Ubuntu to 10.4 and when I boot it stops for 24 seconds at the boot menu then loads. This is the same menu you get on boot when you press Esc. How do I get Ubuntu to boot normal?
View 2 RepliesI have a persistent installation of 10.10 on a USB thumb drive installed with the Universal USB Installer. When I boot, it always brings up the welcome screen, with the languages on the left side, the big "Try Ubuntu" button in the center, and an "Install Ubuntu" button on the right. I just want to run ubuntu from the USB stick. When I click on "Try Ubuntu" the system hangs for 2-3 minutes, requires a force-quit and then brings up the desktop.
If, at the beginning of the boot process, I interrupt it bringing up the initial menu, I can select "English" then "Run Ubuntu from this USB", and it boots very quickly directly to the desktop. Before this install I was running 9.04 and later 10.04 from the same USB stick and had no issue with it booting directly to the desktop. Ideally I'd like to not need to intervene and just have load to the desktop. Do I need to make some changes to grub?
I love My linux OS, and I carry It with me all the time in USB. I used to be able to boot from USB in the University computers, but not any more. Now it required Admin password in order to boot from CD or USB. I tried The VMWare, but I didn't like it. Is there any way I can get around it.
View 1 Replies View RelatedI am VERY new to linux and have managed to install Fedora 14, xmame.SDL and Wah!Cade and finally got it all working great! My final step in my setup is (since the only use for this machine is wahcade) to be able to switch the computer on and boot straight into wahcade...and eventually hide all traces of Fedora during boot. I have managed to get the login to Autologin by adding some lines at the end of /etc/gdm/custom.conf:
Code:
TimedLoginEnable=True
TimedLogin=username
TimedLoginDelay=0
However, I still get the login box but with "Autologin" on it which I have to click ok for or wait about 15 seconds and it goes away. (I was under the impression the timedlogindelay as 0 would be instant) Then immediately after that it still asks for a keyring password.
How can I just get rid of the whole login process (like a single user thing) and just have the thing boot straight to the desktop? Also, once I achieve that, how can I make it open wahcade? And can I remove all the icons from the desktop somehow?
Everything I have come across on tinternet seems to assume I know linux inside out so answering in dummy step by step terms is more than welcome. I have a programming background but I am unfamiliar with linux programs, plugins, terminal, terms etc.
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
Have just installed 9.10, again, many failed attempts previously.Cannot get to boot up and show menu on dual boot with Vista initially,However when I delete the grubenv file the system boots ok and works fine.But does not show the grub menu to choose boot up choices.Got the information to delete the file on some posts elsewhere about booting problem, and tried a longshot and got into Ubuntu for the first time from trying to install now for 3 months!The problem is the file grubenv is created each time so on subsequent boot ups the sytem fails to boot again.The Grub version is 1.97 beta 4, most up to date for Karmic I think, I have seen a version 1.98 but dont think its for Karmic?
Is there a way to modify the grub.cfg file to stop this problem ( all posts say dont touch this file??Or install a script to delete the grubenv file on shutdown as a workaround for me, (I have no idea how to do this whatsoever, I'm not familiar with linux at all)I did read that this problem was fixed/patched in Grub version 2, but dosn't seem.so on my system afetr I updated it when I got into Ubuntu.I couldnt find the patch or fix, I got the information I am on about from this post:URL...It seems to say it was fixed or patched by Colin Watson reading through, but I don't really understand whats being said or how to get the patch on my system if indeed there is one?Sorry for being a bit thick about all this, its a bit beyond my brain now, hope somebody can help out as I have enjoyed my brief bit of fun in Ubuntu.
I am trying to streamline my boot screen/GRUB Menu. I know what I want it to look like (grub_wanted.jpg), and I think I know how to get it by uninstalling a couple of things, (synaptic.jpg). Now I have too many items on the screen, and it looks cluttered to me (grub.jpg).
View 3 Replies View RelatedI've installed Ubuntu on my new desktop alongside Windows 7 (each OS is on a separate drive), I seem to have run into a small problem. Let me start with what I did:
- Unplugged 1TB drive from the PSU, BIOS was not seeing my formatted (and thus empty) 500GB drive and I couldn't put it into the boot order at all with the 1TB turned on.
- Loaded up the boot CD and was able to install Ubuntu 10.1 on my 500GB drive.
- Did a bit of configuring, shut my PC off and plugged my 1TB (with Windows 7) drive back in. I tried to see if I could now see my Ubuntu drive in BIOS but nothing is there - just the Windows drive is in the list of available drives to boot from (along with DVD-ROM and USB).
This is where I've run into my problem. What I want is to have a nice GRUB boot menu at the start like any other dual-boot system but just have the two operating systems on separate drives altogether.I did it this way because I was having issues with the advanced partition menu on the boot CD so just went ahead and followed the KISS method by unplugging the Windows drive.
I was told by a friend that if I put my Ubuntu drive into the first position in my boot order and the Windows drive in the second, then I could boot into Ubuntu and run a GRUB update command (he told me to google it) and that would create the necessary GRUB that had the entries for Windows 7 and Ubuntu.Both operating systems are 64-bit, I imagine that might make a difference in whatever help you guys can offer me. I love the hell out of both OS's and want to be able to use them interchangeably.
i am having a problem with my dual boot setup. I originally installed windows XP on a 100gb hard drive, from there i downloaded and burnt ubuntu off so i could install it on my 200gb hard drive. For a little bit i struggled to even get it to install because it wouldn't recognize my onboard nvidia graphics, i ended up having to get an alt boot disk and fix it with technique in this link:
[URL]
Now after the bios boot, my screen shuts off for awhile and takes me directly to the login screen for ubuntu. No Grub, no windows boot options, nothing. I tried booting windows by choosing it from the bios boot menu but all it does is hang at prompt and doesn't boot at all. I tried the live cd fix and reinstalled grub but nothing changed. What i think is happening is that it boots the Grub menu but it doesn't display it because of graphical confrontations. It hangs for about 10 seconds, the grub default time, and then turns my monitor back on to display the Ubuntu login screen.
I am trying to install ubuntu 10.04 on windows7.windows 7 was already installed.I ollowed these steps to install ubuntu 10.04.1)First i made some freespace in hard disk to install ubuntu using windows7 default options(By shrinking).2)I used USB drive to install ubuntu.I made it bootable using unetbootin.3)I followed normal steps install(language,area,keyboard,using manual partition i installed ubuntu in free space,etc).4)I got boot menu when it restarted.PROBLEM isAs long i use only ubuntu (boot into ubuntu --shutdown--boot into ubuntu --shutdown) it works well.
If once i boot into windows 7 and restart the system i am loosing boot menu options.The following error i am getting"no module name found Aborted.Press any key to exit".If i press any key,I guess its trying boot using internet and lastly it says Operating system not found and hangs.
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I'm a noob but enjoying dual booting. However, every time I run update manager I get a new vmlinuz entry and now I have multiple boot options in my grub boot menu. Now when I have like 5 ubuntu entries to move past to select Windows. and the latest Ubuntu is always at the bottom so I have to annoyingly scroll down to select the latest there. I don't really understand what the vmlinuzXXX entries in the boot folder are for so I don't want to delete them. I've thought about editing the loop in the 10_linux file in the grub.d folder but it looks like its calling a function or macro or something:
Code:
linux='version_find_latest $list'
But like I said, I'm a noob to all this (a .Net developer on Windows professionally) and don't understand where this is. It looks like this function call has the logic I need to fix. Because its not finding the latest, its just finding all. How to I get back to one Ubunutu boot option like when I first installed?
I have 4 OS's on a publicly used pc. I want to hide the boot menu on GRUB2 and have it appear only when I press and hold the SHIFT key during boot. Will changing in /etc/default/grub GRUB_HIDDEN_TIMEOUT to 0 safely accomplish this goal? Also, what is the command for deleting all of the former kernel upgrades from the boot menu?
View 8 Replies View RelatedAfter quite a bit of troubleshooting, I have only made my problems dual booting XP and Xubuntu go from bad to worse.
I installed xubuntu on my Windows XP laptop as a dual boot system. (Single 40gb Hard Disk, used xubuntu wizard to repartition XP)
After installation, Windows XP would not boot from the boot menu; it would just go to a blank screen with a blinking cursor in the upper left corner (xubuntu was fine).
So far, I have repair installed (not clean) Windows XP and used the Windows XP recovery console commands "fixboot" and "fixmbr" (fixmbr caused xubuntu to become unbootable with no boot menu) to no avail.
I have 2 HDD one of 1 TB and other of 250 GB on my Desktop, on my 250 HDD I installed Windows 7 and have tried creating a Dual boot but my System boots to Windows without giving me Booting options to Windows or Ubuntu, if I manually select the booting option by hitting the F8 Key shows me list of H/w to boot from, I select the 250 GB HDD and system now boots to Ubuntu, both OS works fine no issues but the glitch is why do I have to do this everytime when booting to Ubuntu.
I also tried clean installing Ubuntu after having removed the Windows 7 but the same problem, cannot boot unless the HDD is selected.
At the time of installation I also noticed that Ubuntu will not detect the Windows OS which was already there before installing Ubuntu, whereas I tried with the same disc on different laptop computer and it worked just fine, it detected windows 7 loader and gives the booting option.
I just want to know is it because of 2 HDD installed on my Desktop.
I realise that passwords are a good thing but I'm getting fed up having to enter a password just to get my wireless network to work every time I switch on Ubuntu or when I log out and back in again.
Seeing as there is nobody in the house that I want to keep away from the computer, is there a way to automatically sign-in to my wireless network without having that annoying key-chain popping up every time?
I currently use 4 keyboard maps in my session (Russian, Ukrainian, Polish and French). I'd like to use one more : Sweddish, but it seems that I can't have more than 4. Does anybody knows a way to bypass this limit?
View 1 Replies View RelatedI'm running Ubuntu 10.10 off a desktop. I was using it for quite a while up until last night when out of nowhere while surfin', and browsing, the screen just turned white, I've tried restarting by powering off manually, as I couldn't get it to any other way. After the computer restarts, it might flash black for a sec a couple of times, then back to being white again, the BIOS screen doesn't even show up. It sounds like in the background the computer might still be loading up. My monitor is a 21"LCD, if that means anything?
View 2 Replies View RelatedYesterday I was working on Ubuntu, i shut down the computer normally, and then when i restarted it like an hour later i couldn't bypass the login screen. I insert my username & password correctly and the screen goes back for one second and then displays the login and password inputs again. I have just one username there. Before i shut it down i was trying to install Eclipse, so i messed around with some files related to Eclipse only, if that has anything to do with the problem. I also have Windows XP installed along with Ubuntu 9.10.
View 3 Replies View RelatedI have to enter the root password every time I want to run
Code:
sudo vpnc
and I know that there is a way to avoid entering password every time but I can't remember what it is.
I've read the documentation, but I'm still confused. I have two servers, one running Postfix and SquirrelMail, and another i want to setup a wiki(already setup) and Photo Gallery.On my Second server(2)I have two virutal webservers, wiki.rmasonfamily.info and photo.rmasonfamily.info, both running on port 80.My first computer is running my mail server again as a virtual server, mail.rmasonfamily.info. Default server is not used in either one.
Server 1 will be my proxy server, and if I understand correctly, my reverse proxy. Ubuntu had Apache set with a configuration in etc/apache2 using sites-available with configuration for each Virtual Server with sites-enabled with links to configuration files in sites-available. My Virtual Server in Server 2 are working fine, along with my mail server in Server 1. this is the code I assume I must use to bypass to wiki.rmasonfamily.info. In server 1, under sites-available, in the file wiki.rmasonfamily.info this is the code I put
<VirtualHost *:80>
ServerName wiki.rmasonfamily.info
ProxyRequests Off
ProxyPreserveHost On
[code]....
Doesn't work, I know I'm doing something wrong...
what is the acl type is used to bypass a website where to implement the rule?
View 3 Replies View RelatedI tried a remote reboot via ssh. I couldn't log back in even though sshd is a startup script, because the KDE daemon wanted me to enter my kwallet password...which is of course part of the DE, not something accessible via ssh. How do I turn off that check or automate it?
View 2 Replies View Relatedpoint me at a free proxy to bypass this which can simply be installed, built and/or run.setting up a server outside china and running a tunnel to it from my comp is not an option. also, below is a list of sofware that i have tried and failed to work:
Tor with vidalia
Tun with squid (i think squid)
hamachi (which i later realized would never have worked)
i tried to get haystack but it wouldn't build.
PS: if this post is in the wrong area, please tell me where to move it...
Is there a way to bypass (and/or reset)the username/password when powering up?
View 3 Replies View RelatedI have installed Suse 11.3 on /dev/sdc which is a hard drive connected to a usb port. Windows 7 lives on /dev/sdb in the box. Another drive sda is in the box also. I configured bios to boot the usb drive first. Grub is installed on /dev/sdc mbr. My scheme is to allow me to boot directly to Windows if the usb drive is not powered up, and directly to Suse if it is powered up. That all works. However, I would like to bypass the grub menu and boot right into Suse, like what happens with Windows, not having to select an entry from that pesky grub menu.
What is the best way to configure the system so that this can work? I've done a lot of searching but there are too many grub horror stories in the haystack to find this particular needle. Also, I've had my share of problems recently after losing control of the boot process somehow and not being able to boot into Suse at all. All of the postings I found on the net about recovering from that turned out to be phoney in some way and I had to reinstall to bet better. I'd like not to repeat that scenario.
I am using FC11. My problem is whatever application that needs access to the internet are blocked by company's proxy server. So, configuration is like
my_machine---------> firewall ----------> outside world..google and etc
Now, If I am using firefox then I have configured it to use proxy server and required login details and etc. But, my eclipse, ssh, git and all those needs internet connection as well... Is there anything like which sets all details (proxy server, user name and passwd) system wide ? So that I dont have to pass it to each application...
I have a server that said a volume was dirty and to check it at reboot, so someone did a shutdown -rF now. Only problem is the other volumes are HUGE and it will take forever, which I cant have happen. The volume with the trouble is non-critical so I could take it offline and check it that way if i can get this to boot quickly. How can I do that if its going to auto check every volume on reboot now?
View 2 Replies View RelatedI'm using Fedora 10 as a proxy server using squid, but I recently noticed that some users use the IPS's Dns to bypass the proxy and surf the web freely. So my question is, is this a problem with Squid or perhaps I can solve the problem whit IPTables.
View 6 Replies View RelatedI've attached my squid.conf, I'm creating a proxy server along with a content filter for work using dansguardian and squid, recently my boss asked me to allow a few ips to bypass squid without being authenticated now i thought this config might do it but it seems to be reluctant to let this computer through without being authenticated
View 3 Replies View Related