Ubuntu :: Booting To XP And Reformatting The Disk, And Install It Using The HP?
May 11, 2010
I have a working dell deminsions, no problems 2gb of ram, all that good stuff running xp.I have an older HP Pavilion with about 1Gb of ram, running windows 98. There were some issues with the partitions and registries and i want to install Linux over it to fix all issues and make it a working computer again.I burnt the ISO as an image on a cd using, Nero. no problems with the cd. I could not get the Hp to recognize the cd, and it wont boot. So i took the HDD out of the HP and put it into my dell. I can get to the Install part of the setup and that's where it goes to just a black screen with a flashing cursor.I am considering, booting to XP and reformatting the disk, and trying to install it using the HP again.
View 1 Replies
ADVERTISEMENT
Jan 2, 2010
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
View 2 Replies
View Related
Mar 13, 2011
I want to install a minimal version of linux (probably oS 11.4) onto a partitioned 1TB USB drive to serve as a standalone, bootable restore mechanism for a couple of machines.
First off, is this feasible?
Second, how do I go about it? I was able to install the system to the drive but how do I make that drive bootable? So far, I can't even get it to boot from the grub menu on the first internal hard drive as the system complains loudly about not being able to read disk descriptors and such. I tried the various boot spec (chainloader, menulist, etc) with no luck. Do I need to disconnect all the internal drives then install as if it were the only hard drive in the machine with the DVD reader?
I am assuming that I need some sort of bootstrap code in the MBR of the USB drive to get started but I'm a bit lost here and would appreciate any input, especially from some one who has tried this, before I spend anymore time on it.
View 4 Replies
View Related
Jan 19, 2011
I have been using Fedora 13 for about 3 and a half months now maybe more and i have made the decision to switch back to windows. It is not that i have any complaints about Fedora but trying to get vent to work has been an uphill battle and i like to try many diffrent games and Fedora is just not compatible with all the games i would like to play, anyway my problem is that i cannot boot from the windows install disk i have it just loads Fedora no matter what i do.
View 9 Replies
View Related
Feb 24, 2011
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies
View Related
Mar 17, 2011
That is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
View 9 Replies
View Related
May 6, 2010
I have a Seagate Expansion external drive.
It won't load as it is NTFS. Am I okay to reformat it using GParted? I'm unable to get the drive up in a window, but GParted can see it.
View 2 Replies
View Related
Jul 30, 2010
Xubuntu is great don't get me wrong, but there's a few things I don't like about it. So my main question is, I've installed ubuntu-desktop package, how can I remove Xubuntu and just keep it as Ubuntu without having to reformat? I'd even like to change the boot screen to show Ubuntu instead of Xubuntu.
View 3 Replies
View Related
Jan 16, 2010
I just erased +200GB worth of photos, documents, music and videos on my external hard drive.I wanted to try the new Ubuntu Lucid Lynx Alpha 2, so I downloaded the .iso, launched the live USB disk creator and tried to format my 1GB pendrive to make room for the OS. Somehow, I ended formatting my 320GB external USB hard drive. The hard drive had to partitions (one EXT3 and one NTFS), but now it only has a FAT partition that spans the whole drive.I understand that the new FAT partition may have erased the EXT3 data structures at the beggining of the partition, making file recovery next to impossible.A confirmation dialog on the live USB disk creator wouldn't have hurted either.
View 5 Replies
View Related
Jul 19, 2010
I used to be a Mac user until my Ibook died. I now have a Toshiba Netbook running Ubuntu 10.04, but want to make use of my Maxtor external 250 GB drive, although it's formatted for Mac.Could someone advise as to a way around getting my old data off, before re-formatting for Linux use? Is it possible to partition part of the drive for Ubuntu - move everything into that and then delete the old apple partition?
View 2 Replies
View Related
Jan 25, 2011
I'm trying to boot Ubuntu from a CD on a Windows XP Home laptop. The CD was burned correctly; i saw all the files on the disk. I restarted the laptop with the disk installed and all I'm getting is a screen that says Ubuntu with five flashing dots in sequence. Nothing else. It has been running for more than 10 minutes now like this.
View 2 Replies
View Related
Apr 9, 2011
I'm having trouble using Ubuntu 10.10 (64 bit) to create an installation on a USB (read-write) drive. I've had to use PLOP to boot the system, since I want the usb drive on a high-speed controller, and my machine is such that the on-mainboard USB is slow. So, I put the empty USB (16 GB) on the fast controller, boot from the Ubuntu installation DVD, and install the OS.
Then I switch to booting PLOP, the boot manager, and use it to boot from USB. Everthing works fine, and I can use ubuntu -- but only the first time. Once I shut down, and try to boot again, PLOP doesn't start the boot from the USB drive. It apparently crashes (the star field simulator doesn't continue). It does try to (at least) load the USB drivers, but stalls without finding the USB boot medium (my flash drive).
Anyone have any idea what's happening? Also let me know if there might be a more trusted way to boot from the high-speed USB drive (like, it would be great if the installation disk had an option to install the USB drivers and then do a secondary boot). Plop is nice because it can be on read-only storage (a DVD or CD) and
so can't be corrupted after the fact.
View 9 Replies
View Related
Aug 21, 2011
Is there any way of being able to access data/files from a disk with Ubuntu operating system on it with another disk running Ubuntu? Don't worry, I'll give an example of what I mean, haha. For example, I used to use hard disk 1 as my main drive with the Ubuntu operating system on it. I removed that drive a long time ago and am now using hard disk 2 with Ubuntu on it. Is there any way that I can just retrieve files from hard disk 1 without having to boot into it, ie, treat hard disk 1 like a data drive and be able to copy and paste files from there onto my now main drive, hard disk 2?
If possible, would the process be more complicated if hard disk 1 used a password to log in?
View 9 Replies
View Related
Nov 7, 2010
When I try to delete files form my flash drive, the file picture goes away, but the actual data does not. Lets say I put a 900mb file on my 4gb flash drive, then I delete it. It will still ll me that only 3100MB are left in free space. If I try to add more than that it tells me the drive is full. I keep reformatting and reformatting into all different types on file systems but nothing works.
View 4 Replies
View Related
Jun 3, 2011
I'm having difficulty repairing/reformatting a USB drive. I've yet to explore and get me on the right track. I'm sure I'm missing something obvious. I have a generic USB drive, 4GB, currently formatted FAT. I can't save files to it, can't format it using Ubuntu's Disk Utility. Attempts to format using Disk Utility return the following error:
Error creating partition table: helper exited with exit code 1: Error calling fsync(2) on /dev/sdb: Input/output error Yesterday I got fed up and tried to just zero the thing out using a dd command... ran it in verbose, the right stuff returned to screen, still no dice. I can't get it to a point where I can format it either using Disk Utility or mkfs.
View 9 Replies
View Related
Jul 19, 2010
I have newly installed Ubuntu 10.04 lts. Everytime when I am boot my system, Ubuntu try to check my harddisk. I am stopping that by pressing "c" key.Why it is so? anything problem with my hard disk or I need to disable anything for avoiding it for everytime?
View 2 Replies
View Related
Aug 8, 2010
I'd like to COMPLETELY erase all the contents of my HDD to give it a new lease in life (doing a clean re-install of my OS's) How do I create a start up disk from Windows 7 that will allow me to access DOS and use format.exe /all /q otherwise, is there a Linux counterpart? I want the HDD to be as if brand spanking new...
View 1 Replies
View Related
Jan 25, 2010
I'm trying to get it on my own computer at home to work on. I have an iMac, and I also have a disc with Fedora on it (along with sabayon and slax and a few others). I tried booting my computer from the disc, but when I got to the localhost login bit, I couldn't get any further. I have searched for this query already, but seemingly all the answers assume that it was installed beforehand. I haven't installed anything, just put in the disc and changed the settings to 'boot from disc' before restarting the computer. Am I missing something? Also as a separate query, how do I partition the hard drive so I can run Fedora alongside Leopard? And what is the story with virtual machines?
View 6 Replies
View Related
Jan 6, 2011
For various reasons, when I installed our server, I configured it so that it would boot off a USB flash disk. The flash disk mounts as /boot and / mounts on our RAID array.
It all works very well, but I would like to have backup so that if/when the flash disk goes, I can pop in another one.
I have tried to make copies of the flash disk (using both cp and dd), but it doesn't work. When the server starts its bootup sequence, instead of Linux loading, a cursor starts blinking endlessly.
If I put the original flash in, it works fine. If I put the copy in, it doesn't work.
I can't see any difference between the copy and the original. They seem to have the same content. If I do blkid both have the same label and UUID. The label is /boot, and /etc/fstab refers to this
We are running Scientific Linux 5.4.
View 3 Replies
View Related
Aug 2, 2010
My wireless connection has always slow on my ubuntu desktop. I have always thought this was a matter of hardware, but after reformatting my harddrive because of recent problems, the wireless has slowed to point of ridiculousness. I would guess I had a dial-up connection if I didn't know better. I've tried simple things like rebooting and removing add-ons, but nothing seems to work.
View 4 Replies
View Related
Nov 12, 2010
I am a ubuntu user and I tried to install ubuntu on my sister's netbook too. The problem is that the netbook has a broadcom wi-fi n that is not supported by linux for now because I searched for drivers and other stuff an I found that it is not supported. After that I tried to format the disk and reinstall windows 7 but the problem is that the installation procedure gives me this error: "windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
I tried to do all the things that are described here: [URL] but it's still not working.
Obviously when I format the drive with ubuntu and I put it in the netbook it's not working, it stops at the logo and the only thing I can do is entering BIOS.
I formated the drive with a windows os and then the pc makes the boot from usb but the problem persit...I still can't install because of that error :"windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
Before installing ubuntu the sistem had kaspersky antivirus and detected 1 Trojan, it could be that a virus destroyed the bootsect...I don't think so.
View 3 Replies
View Related
Jul 2, 2010
I have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
View 5 Replies
View Related
May 24, 2009
i had installed fedora and windows on my internal Harddisk earlier,then tried to install fedora on external USB hard disk,now my computer failed to boot from internal hard disk,when i unplugged the hard disk.
View 9 Replies
View Related
Apr 28, 2010
I have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
View 6 Replies
View Related
Apr 23, 2010
I want a debian server running dhcp/tftp/pxe containing a tarball of a 'client' debian installation.I want a client that pxe boots, talks to the server, creates a ramdisk, untars the 'client' tarball to the ramdisk and boots into it. Once that's working, I want an NFS map back to the server for the users home directory.Can't find any really helpful howto's... wondering if anyone on here has done this?
View 2 Replies
View Related
Jul 9, 2011
I've lost my admin password on my current Windows OS and would like to install Linux Ubuntu or a similar user-friendly distro of Linux alongside, see how that goes and possibly reformat my PC with Linux as I was told it would convert NTFS formatted drives to ext3, not delete them.
View 9 Replies
View Related
Nov 18, 2010
I'm an experienced Linux developer who has run into a little problem. I'm using a National Instruments 8170 chassis, among the normal ports, it has a FDD and USB port but this model does not allow booting from a USB CDROM ( I tried a BIOS update, that didn't help either ). I made this cool customized 550MB FC8 LiveCD wtih X, GCC, various apps, etc. and a kernel 2.6.30 & 2.6.18 boot floppy disk with all the needed drivers. The floppy boots to a shell with all the busybox utils, etc. and detects the USB CDROM media and all its files.
My Question is: How do I get the kernel and initrd on the Live CD to start or boot after booting from the Floppy disk ?, I mean, I want to load linux again but this time from the CD after booting linux from floppy, if that makes sense. I'm just using the floppy to boot and recognize the USB CDROM. This can be done with MSDOS and loadlin but loadlin has an issue(it hangs) with the newer kernels (2.6.18 and greater). I searched for the loadlin source code to port it to linux but was unable to find it on the net.
View 1 Replies
View Related
May 8, 2011
I have successfully migrated my linux install to a new /, /home, /boot partition on my ssd. Everything works fine, except that it won't make the root directory on the right disk. When I change the root=uuid=<drive id> to my new drive everything is fine, but I can't automate that... in other words I have manually typed the uuid of my root-partition for about 100 times now and I am fed up with that how I can save the uuid of my new drive in the startup parameters?
View 2 Replies
View Related
Nov 4, 2010
My DVD drive has gone bad and with new Fedora 14 just launched I decided to install the same through the usb flash disk.
First I used dd: dd if=/home/prabhat/Download/Fedora-14-i386.iso of=/dev/sdb
It went on nicely and copied the iso nicely. But I could not boot with it.
Second time I tried livecd-tools: livecd-iso-to-disk /home/prabhat/Download/Fedora-14-i386.iso /dev/sdb1
It went on nicely, and finally declared something like - usb disk is not live .... But here again when I tried to boot it says MISSING OS. I checked the contents of the flash disk. It contained raw DVD iso image, one images directory, one syslinux directory. I checked the contents of the images directory, and I found it had the install.img. And yes, the /dev/sdb1 is bootable.
View 3 Replies
View Related
Apr 29, 2011
I am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies
View Related
