I'm trying to boot Ubuntu from a CD on a Windows XP Home laptop. The CD was burned correctly; i saw all the files on the disk. I restarted the laptop with the disk installed and all I'm getting is a screen that says Ubuntu with five flashing dots in sequence. Nothing else. It has been running for more than 10 minutes now like this.
View 2 Replies
I have been using Fedora 13 for about 3 and a half months now maybe more and i have made the decision to switch back to windows. It is not that i have any complaints about Fedora but trying to get vent to work has been an uphill battle and i like to try many diffrent games and Fedora is just not compatible with all the games i would like to play, anyway my problem is that i cannot boot from the windows install disk i have it just loads Fedora no matter what i do.
View 9 Replies View RelatedMy dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
I'm having trouble using Ubuntu 10.10 (64 bit) to create an installation on a USB (read-write) drive. I've had to use PLOP to boot the system, since I want the usb drive on a high-speed controller, and my machine is such that the on-mainboard USB is slow. So, I put the empty USB (16 GB) on the fast controller, boot from the Ubuntu installation DVD, and install the OS.
Then I switch to booting PLOP, the boot manager, and use it to boot from USB. Everthing works fine, and I can use ubuntu -- but only the first time. Once I shut down, and try to boot again, PLOP doesn't start the boot from the USB drive. It apparently crashes (the star field simulator doesn't continue). It does try to (at least) load the USB drivers, but stalls without finding the USB boot medium (my flash drive).
Anyone have any idea what's happening? Also let me know if there might be a more trusted way to boot from the high-speed USB drive (like, it would be great if the installation disk had an option to install the USB drivers and then do a secondary boot). Plop is nice because it can be on read-only storage (a DVD or CD) and
so can't be corrupted after the fact.
Is there any way of being able to access data/files from a disk with Ubuntu operating system on it with another disk running Ubuntu? Don't worry, I'll give an example of what I mean, haha. For example, I used to use hard disk 1 as my main drive with the Ubuntu operating system on it. I removed that drive a long time ago and am now using hard disk 2 with Ubuntu on it. Is there any way that I can just retrieve files from hard disk 1 without having to boot into it, ie, treat hard disk 1 like a data drive and be able to copy and paste files from there onto my now main drive, hard disk 2?
If possible, would the process be more complicated if hard disk 1 used a password to log in?
I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?
Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.
I have a working dell deminsions, no problems 2gb of ram, all that good stuff running xp.I have an older HP Pavilion with about 1Gb of ram, running windows 98. There were some issues with the partitions and registries and i want to install Linux over it to fix all issues and make it a working computer again.I burnt the ISO as an image on a cd using, Nero. no problems with the cd. I could not get the Hp to recognize the cd, and it wont boot. So i took the HDD out of the HP and put it into my dell. I can get to the Install part of the setup and that's where it goes to just a black screen with a flashing cursor.I am considering, booting to XP and reformatting the disk, and trying to install it using the HP again.
View 1 Replies View RelatedI have newly installed Ubuntu 10.04 lts. Everytime when I am boot my system, Ubuntu try to check my harddisk. I am stopping that by pressing "c" key.Why it is so? anything problem with my hard disk or I need to disable anything for avoiding it for everytime?
View 2 Replies View Relatedi am having some issues with dual booting my SL6.1 and Windows. The situation is that i recently acquired an old hard drive from a non-working computer of mine with Windows already installed (i know the windows is functional, as i tested it on my new PC with SL6.1 currently installed & everything runs fine)
The problem is that after editing the grub.config to include windows, windows will no longer boot after an attempt to install a legit version of McAffee anti-virus software which coincidently was only after the first attempt at running both OS's in a dual-boot fashion. Except past the windows start up screen before the dreaded blue-screen.
Which is weird because SL6.1 OS will still boot & works perfectly fine like always, so it doesn't really make sense.
My current setup is:
Disk 1: Solid-State:
Boot Partition
SL6 LVM1: Root Partition
Disk 2: Hard Drive:
SL6 LVM2: User, Temp & Swap Space Partitions (Different LVM to Root)
Disk 3: Hard Drive:
Windows 7 Professional 64-bit
My guess is its windows MBR. The reason i say this is because the Hard Drive contents of the Windows software still appears intact when accessing the drive from the Linux OS. I don't won't to go through the rigmarole of re-installing both OS's. So hopefully their is a relatively simple solution.
I want to install a minimal version of linux (probably oS 11.4) onto a partitioned 1TB USB drive to serve as a standalone, bootable restore mechanism for a couple of machines.
First off, is this feasible?
Second, how do I go about it? I was able to install the system to the drive but how do I make that drive bootable? So far, I can't even get it to boot from the grub menu on the first internal hard drive as the system complains loudly about not being able to read disk descriptors and such. I tried the various boot spec (chainloader, menulist, etc) with no luck. Do I need to disconnect all the internal drives then install as if it were the only hard drive in the machine with the DVD reader?
I am assuming that I need some sort of bootstrap code in the MBR of the USB drive to get started but I'm a bit lost here and would appreciate any input, especially from some one who has tried this, before I spend anymore time on it.
I'm trying to get it on my own computer at home to work on. I have an iMac, and I also have a disc with Fedora on it (along with sabayon and slax and a few others). I tried booting my computer from the disc, but when I got to the localhost login bit, I couldn't get any further. I have searched for this query already, but seemingly all the answers assume that it was installed beforehand. I haven't installed anything, just put in the disc and changed the settings to 'boot from disc' before restarting the computer. Am I missing something? Also as a separate query, how do I partition the hard drive so I can run Fedora alongside Leopard? And what is the story with virtual machines?
View 6 Replies View RelatedFor various reasons, when I installed our server, I configured it so that it would boot off a USB flash disk. The flash disk mounts as /boot and / mounts on our RAID array.
It all works very well, but I would like to have backup so that if/when the flash disk goes, I can pop in another one.
I have tried to make copies of the flash disk (using both cp and dd), but it doesn't work. When the server starts its bootup sequence, instead of Linux loading, a cursor starts blinking endlessly.
If I put the original flash in, it works fine. If I put the copy in, it doesn't work.
I can't see any difference between the copy and the original. They seem to have the same content. If I do blkid both have the same label and UUID. The label is /boot, and /etc/fstab refers to this
We are running Scientific Linux 5.4.
I am a ubuntu user and I tried to install ubuntu on my sister's netbook too. The problem is that the netbook has a broadcom wi-fi n that is not supported by linux for now because I searched for drivers and other stuff an I found that it is not supported. After that I tried to format the disk and reinstall windows 7 but the problem is that the installation procedure gives me this error: "windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
I tried to do all the things that are described here: [URL] but it's still not working.
Obviously when I format the drive with ubuntu and I put it in the netbook it's not working, it stops at the logo and the only thing I can do is entering BIOS.
I formated the drive with a windows os and then the pc makes the boot from usb but the problem persit...I still can't install because of that error :"windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
Before installing ubuntu the sistem had kaspersky antivirus and detected 1 Trojan, it could be that a virus destroyed the bootsect...I don't think so.
I've read that, when configuring a dual-boot system, you should install Windows first to avoid any issues.Some questions: I'm assuming this has to do with the boot loader so: How is Windows boot loader so different that this matters? If I'm totally off, please explain.Is this the same case with Windows 7 and Windows XP? Depending on question 1 of course: Will installing Windows later on mean that it will definitely not work or just that you might encounter issues later on? Some tutorials are kind of ambiguous about that point.
View 3 Replies View RelatedI have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
i had installed fedora and windows on my internal Harddisk earlier,then tried to install fedora on external USB hard disk,now my computer failed to boot from internal hard disk,when i unplugged the hard disk.
View 9 Replies View RelatedI have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
I want a debian server running dhcp/tftp/pxe containing a tarball of a 'client' debian installation.I want a client that pxe boots, talks to the server, creates a ramdisk, untars the 'client' tarball to the ramdisk and boots into it. Once that's working, I want an NFS map back to the server for the users home directory.Can't find any really helpful howto's... wondering if anyone on here has done this?
View 2 Replies View RelatedBackground: I'm a 20+ year Mac user, switched four years ago to Linux.I have NO experience with Windows to speak of. Whenever I've gotten a new box, it's either been home-built or a Mac.Now I have a new Acer Aspire AS7551 laptop, and although I have not yet booted into Windows, it comes with a Windows 7 Home Premium license. I've been running it with Ubuntu 10.04 off a flash drive and everything works perfectly.
What I want to do: I want to wipe the disk, install Lucid, and run Windows in Virtualbox (for the sole purpose of watching some Netflix and learning a little bit about Windows 7). For the purpose of this question, please accept that I DO NOT want to dual boot.The problem: From what I can find, I can't use the "recovery discs" that came with my laptop to create a virtual machine. This is confusing, because it seems like I paid for a legitimate Windows license for use with this laptop.
Questions:
1. Would MS exchange my recovery discs for a regular install disc to go with my license code if I explained this to them?
2. If not, is there a source for Windows ISOs that I can safely use with my license? (I am aware that the legitimacy of that approach is questionable, but I am quite comfortable with the ethics since I paid for Windows 7, own the license, and only want to use it on the same computer.
3.If not,is there any way in heck I can use my recovery disc to create something Virtualbox can work with?
4. If not, how are all of you people getting your Windows virtual machines going??
(I have read that Acer is a major hassle to get a refund from for the "Windows tax" so I might as well be able to use it--this is MS' chance to win over a fan if only they will let me!)
I'm an experienced Linux developer who has run into a little problem. I'm using a National Instruments 8170 chassis, among the normal ports, it has a FDD and USB port but this model does not allow booting from a USB CDROM ( I tried a BIOS update, that didn't help either ). I made this cool customized 550MB FC8 LiveCD wtih X, GCC, various apps, etc. and a kernel 2.6.30 & 2.6.18 boot floppy disk with all the needed drivers. The floppy boots to a shell with all the busybox utils, etc. and detects the USB CDROM media and all its files.
My Question is: How do I get the kernel and initrd on the Live CD to start or boot after booting from the Floppy disk ?, I mean, I want to load linux again but this time from the CD after booting linux from floppy, if that makes sense. I'm just using the floppy to boot and recognize the USB CDROM. This can be done with MSDOS and loadlin but loadlin has an issue(it hangs) with the newer kernels (2.6.18 and greater). I searched for the loadlin source code to port it to linux but was unable to find it on the net.
Keep getting the same error message trying to install via Wubi under Windows XP. When I download and run wubi.exe, I get an error message that I can't dismiss that reads: Windows - No Disk There is no disk in the drive. Please insert a disk into drive .(sic) I've tried downloading the appropriate .iso and putting it in the same directory as wubi
View 2 Replies View RelatedI have successfully migrated my linux install to a new /, /home, /boot partition on my ssd. Everything works fine, except that it won't make the root directory on the right disk. When I change the root=uuid=<drive id> to my new drive everything is fine, but I can't automate that... in other words I have manually typed the uuid of my root-partition for about 100 times now and I am fed up with that how I can save the uuid of my new drive in the startup parameters?
View 2 Replies View RelatedMy DVD drive has gone bad and with new Fedora 14 just launched I decided to install the same through the usb flash disk.
First I used dd: dd if=/home/prabhat/Download/Fedora-14-i386.iso of=/dev/sdb
It went on nicely and copied the iso nicely. But I could not boot with it.
Second time I tried livecd-tools: livecd-iso-to-disk /home/prabhat/Download/Fedora-14-i386.iso /dev/sdb1
It went on nicely, and finally declared something like - usb disk is not live .... But here again when I tried to boot it says MISSING OS. I checked the contents of the flash disk. It contained raw DVD iso image, one images directory, one syslinux directory. I checked the contents of the images directory, and I found it had the install.img. And yes, the /dev/sdb1 is bootable.
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
View 2 Replies View RelatedThat is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI am in the process of re-DL-ing the ISO as the checksums didn't match.
Mind you, that was with a shell extension in Win-Lose. Who knows.
Anyway:
I have the ISO (that I had previously) on a USB courtesy of UNetBootIn. All appears well until, quite quickly, I receive an error after the loading process which goes something like:
Code:
Error: cannot find disk at [hash-code - looks like 0ace5f etc etc, is about 12 char's in length.]Something very similar (but not same error I think) happened when I tried to do the same with my OpenSolaris or Fedora install. I.e., gets as far as the very beginning of the loader and then: bork.
At least one of them said "will reboot in 120 secs". Saves me the trouble!
Not sure how to explain so I'll jump right in, in 2 weeks i have to install windows for a class I'm taking, i've got a partition on my first HDD for this, i also have a partition on it for ubuntu, and one for storage. Windows 7 is installed on another HDD, and has its own partition there. Because I am going to be moving the drive with ubuntu 2 times a week, and I won't always have it,I want to leave my boot intact, and have my windows 7 boot menu show ubuntu as a choice, which then shows grub or w/e. grub is intact atm, but to get to ubuntu I have to reboot and unplug all my other drives, this gets old.
Neither OS knows of the other, i installed windows first, a month or 2 ago, then to make sure i didn't interfere with my main drive i unplugged it for the install of ubuntu. i assumed it would be as simple as opening a boot.ini file, copying the windows entry, and changing the hard drive to 0,2 but I've learned that windows 7 doesn't have such a file
I'm a noob when it comes to this kind of stuff, so bear with me. Ok so my computer has 4 hard drives, a 640gb, 500gb, and two 320gbs. I have the larger two on a raid 0 array, which is also where I have windows installed. I installed Ubuntu on one of my spare 320gb drives, so that I wouldn't have to worry about partitioning. But now every time I boot my raid array in order to boot windows, grub will load and my computer will boot Ubuntu instead.
View 1 Replies View RelatedBoot Info Script 0.55 dated February 15th, 2010============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
[code]...
