i had installed fedora and windows on my internal Harddisk earlier,then tried to install fedora on external USB hard disk,now my computer failed to boot from internal hard disk,when i unplugged the hard disk.
View 9 RepliesI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI have windows 7 installed in my internal laptop hard disk and I have installed Ubuntu 9.10 "the Karmic Koala - released in October 2009 and supported until April 2011", on my external hard disk. The problem I am facing is that the GRUB have been installed on the hard disk, for that reason if my laptop have restarted I need the hard disk to be attached to it to load the GRUB and to log in to windows. I need guidance in moving the GRUB to my internal hard disk or return the windows boot loader in charge, so I can boot my windows without the hard disk.
View 3 Replies View Relatedjust got Fedora 15 up and running and i have a 2nd internal HDD which i want to use for backups only, how do i format it exactly, mount point? file system? I've tried few options but when i try to point at it with Deja Dup i can't access it?
View 5 Replies View RelatedI'd like to know if there is a software or a distro which does the following: Imagine having two PCs. What the software should do is allow to turn one PC's hard disks to be accessed as external hard disks. It would be great if I could tell which USB port and which hard disk should be accessible like this. Now when everything is selected properly one could just plug in the other PC's USB cable and have access to the selected drive.
View 5 Replies View RelatedI have a dvd I want to boot from, on a certain laptop. The problem is this:
DVD will NOT boot in laptop [1] with this DVD.
DVD WILL boot ok in laptop [2] with this DVD.
- Conclusion, DVD is ok.
* laptop [1] and laptop [2] boots other media in the cd/dvd drive ok.
I can see all files on DVD in both laptops. As a workaround I copied the DVD image off the DVD drive to internal hard disk with following command and the result was as follows:
- result of dd command
# dd if=/dev/sr0 of=/dev/sda4
6298816+0 records in
6298816+0 records out
3224993792 bytes (3.2 GB) copied, 473.18 s, 6.8 MB/s
How do I make that partition [/dev/sda4] bootable ?
I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a little/big problem. This morning, I dont know why, but suddently my hard disk was full. I thougt that the temporary space grew too mucho and I thought if I restart my machine, everything would be nice but no. Now in the logging screen comes messages that some components cant be load and so I can't go in my Fedora
I tried to access to my partition with Knoppix-livecd and free some space, but it seems that Knoppix can't access to that partition. I have installed fedora 12.
I have newly installed Ubuntu 10.04 lts. Everytime when I am boot my system, Ubuntu try to check my harddisk. I am stopping that by pressing "c" key.Why it is so? anything problem with my hard disk or I need to disable anything for avoiding it for everytime?
View 2 Replies View RelatedI have 2 IDE drives, Windows XP is on the Master drive & Fedora 12 is on a partition the other drive. I purposely installed the Linux boot loader on the same drive as Fedora because want to use NTLDR as the primary boot loader. According to a guide I found [URL], I should be able to copy the Linux boot sector to a file & put that copy on the Windows drive & then modify boot.ini, so I am prompted to with an OS choice a startup.
The problem is the command the guide gives to copy the Linux boot sector (dd if=/dev/hdb1 of=bootsect.lnx size=512 count=1) has outdated syntax and does not work. What syntax would make this command work in Fedora 12? Another guide I found ([URL]-vista-already) suggested using: Grub4Dos & modifying boot.ini. This method almost worked until grub gave an error that there was no kernel loaded. What would I type into the grub prompt to load the kernel? How would I automate the loading of the kernel, so I don't have to specify the kernel each time?
I went through the Fedora 11 DVD setup process up to the partition screen, which does show my external SATA drive correct as; /dev/sda when connected by eSATA, but it shows the internal drive which is a standard IDE, as; /dev/sdf , when it should be as; sdb, why ? I did run that fdisk -l in a terminal from one of my other installed Linux, and it did show drives as correct, ( sda, sdb ). I think this may be a issue related to the digital media card reader built into this 2006 Gateway desktop computer being detected as drives like Windows does and assigns drive letters, or is this some bug in Fedora 11 ?
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x826d56f6
Device Boot Start End Blocks Id System
/dev/sda1 * 1 26 208813+ 83 Linux
/dev/sda2 27 1958 15518790 83 Linux
[code]....
I've just put together a new machine and as I expected, there are some issues with hardware. I've just tried to set up the installation of ubuntu, got to the partitioning section and only my external hard drive is being picked up. The internal hard drive is a 1TB SATA drive plugged into a 6GB/s DATA port on my m/b (Gigabyte GA-P55A-UD4 running Intel i5 760 processor). I'm probably going to try the alternate CD to see if that works, but does anyone know if this is a common problem for any of my hardware? (I did a google but couldn't find anything).
View 3 Replies View RelatedI have appealed to anyone on this forum site for any help on installing Unbuntu 10.04.1 LTS on a MACBOOK PRO (Mid 2007 Model. Basically I've followed a few threads & posts on how to Quad boot a Macbook Pro & it seems pretty straight forward,however. Ubuntu is not playing ball for some reason?? The first attempt I tried I had the partitions as follows:
I am using a 500gb sata internal hard drive.
WIN 7 - 125gb
STORAGE - 15gb
WIN XP -125gb
MAC OSX - 180gb
FREE SPACE 50gb - Formatted DOS - Which would become the EXT4 & SWAP FILE partition.
After following instructions:
http://hydtechblog.com/2009/01/26/du...windows-vista/
[Code]...
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI face "read error " while booting. sometimes it start normally. someone told me to check hard disk for errors. i used gsmartcontrol for this. but from its result i am unable to decide is this hard disk failure or just minor errors. can somebody tell me do i require to change my hd or it just something else to cause such error.
View 5 Replies View RelatedI was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
I'm having trouble using Ubuntu 10.10 (64 bit) to create an installation on a USB (read-write) drive. I've had to use PLOP to boot the system, since I want the usb drive on a high-speed controller, and my machine is such that the on-mainboard USB is slow. So, I put the empty USB (16 GB) on the fast controller, boot from the Ubuntu installation DVD, and install the OS.
Then I switch to booting PLOP, the boot manager, and use it to boot from USB. Everthing works fine, and I can use ubuntu -- but only the first time. Once I shut down, and try to boot again, PLOP doesn't start the boot from the USB drive. It apparently crashes (the star field simulator doesn't continue). It does try to (at least) load the USB drivers, but stalls without finding the USB boot medium (my flash drive).
Anyone have any idea what's happening? Also let me know if there might be a more trusted way to boot from the high-speed USB drive (like, it would be great if the installation disk had an option to install the USB drivers and then do a secondary boot). Plop is nice because it can be on read-only storage (a DVD or CD) and
so can't be corrupted after the fact.
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
I have a Sony VAIO AR series, it contains two separate 120GB hard drives that were originally configured in a raid. They're called hd0, and hd1. I disabled the raid and partitioned hd1 in 3 ways, one medium sized partition for the operating system (ext4), one large partition for storage (ext4) and one small partition for Swap space. I then installed Ubuntu onto hd1 with help from UNetbootin. After installation went fine I loaded up Windows installer, created two NTFS partitions, one medium and one large, and installed Windows 7 of the medium sized partition. Now I can't figure out how to boot into the Ubuntu side on hd1. Needless to say, in Windows, hd1 is not visable at all. I can see my two NTFS partitions fine.
When booting up I go through two main screens. The first screen "Matrix Storage Manager Option ROM," lists the physical disks (0, and 1.) and gives me the option to enter configuration with [cntrl+i]. The second screen gives me a list of options to boot from, Yet they are all Windows options and many are redundant. The list includes "Enter Command Line," which when selected tells me "Boot failed! Press any key to enter command line." command line brings me to "grub>" I tried booting Ubuntu from this command line, but don't have much to work with here. I followed this guide, but it didn't take me to completion and I'm not sure where to go from here. http://www.mepis.org/docs/en/index.p...m_command_line
[Code]...
I have 3 hard drives installed to my system, 1TB, 2TB and 500GB drives with the following configuration:
ledi@ledi-ubuntu:~$ sudo parted /dev/sda print
Model: ATA SAMSUNG HD103UJ (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[Code]...
I can boot to the Ubuntu installation in the 2TB drive. My problem reversed when I reinstalled grub to one of the Ubuntu installations in the 1TB drive. I can boot to any of the OS's in the 1TB drive, but not to the Ubuntu in the 2TB drive. The error message is the same as above. I have no idea what am I doing wrong and I would be really grateful for any assistance.
If an old bios and mainboard is being used, such that it cannot handle the large size of HD, then is it useful to say use a live CD and from its initial menu (pressed a key), choose 'Boot From First Hard Disk'? Would this be similar in getting around a bios and disk size limitation I wonder - like - does the use of a live CD in this way avoid using the bios to point to the active partition??
The reason for asking is that a friend has a couple of quality old rack mounted server machines and wants to use Ubuntu having now fitted 80 GB empty drives. Live CD seems ok, and 11.04 install goes ok but on boot up grub comes back with an error.
I recall that early machines cannot see larger(?) HDs for booting purposes even though installs go ok in very large HDs. I wondered if a live CD to boot up temporarily - trouble shooting - would be worth trying for this reason, or am I way off?
I have a dual boot machine with WinXP/Linux Mint on it. I am looking to erase both of them and put up Ubuntu 11.04.
I have chosen to go with a live USB install for this. The live USB boots fine and everything seems usable. However, when I tried to install it would tell me that I do not have 4GB available for the install which seemed a bit weird since I have a 160GB Maxtor HDD.
After digging around a bit I realized that the system does not see my hard drive. Running fdisk -l would only show the USB drive that I am booting from and not the main HDD.
I tried to have a look in /dev to see if my HDD is there and not mounted. But aside from sda which is the USB I did not find an sdb or hd entry.
Has anyone encountered a similar problem while trying to install Ubuntu 11.04?
P.S.: The HDD works fine, I can see it in BIOS and in the other 2 OS-es that I have installed.
I am finding it hard to get 2 seperate hard drives to work each having different OS..... windows XP and Ubuntu 10.10. Making Ubuntu the master, it can recognise the drive but cannot boot from it. If XP is the master it does not recognise the Ubuntu drive at all.
View 3 Replies View RelatedI am a ubuntu user and I tried to install ubuntu on my sister's netbook too. The problem is that the netbook has a broadcom wi-fi n that is not supported by linux for now because I searched for drivers and other stuff an I found that it is not supported. After that I tried to format the disk and reinstall windows 7 but the problem is that the installation procedure gives me this error: "windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
I tried to do all the things that are described here: [URL] but it's still not working.
Obviously when I format the drive with ubuntu and I put it in the netbook it's not working, it stops at the logo and the only thing I can do is entering BIOS.
I formated the drive with a windows os and then the pc makes the boot from usb but the problem persit...I still can't install because of that error :"windows cannot be installed on this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enable in the computer's bios menu."
Before installing ubuntu the sistem had kaspersky antivirus and detected 1 Trojan, it could be that a virus destroyed the bootsect...I don't think so.
I need to get Debian 8 running on my laptop. It is a Toshiba Satellite C40-C which seems to be a fairly new model. It is also a budget type, like a glorified netbook, but has come with Windows 10.
I have installed various versions of linux before on laptops and desktops no problem using a CD or DVD but this machine has no optical drive so I have been trying to use a usb stick. The bios is 32-bit uefi and the cpu is a dual core 64 bit Celeron. It has 2 gb ram and a 32 gb sd/mmc card built in instead of a hard disk. Windows 10 is installed with a recovery partition.
Progress so far:
I have resized the windows partition to give around 10gb available for Debian install.
I have downloaded the first DVD image and created a bootable 16gb usb stick with it with one of the recommended windows apps (not unetbootin) and this stick seems to work fine.
I have disabled Secure Boot in the bios. There is no option to change the 32 bit uefi to either 64 bit or to a legacy setup.
I have ran the Debian 8 install which seems to have worked. 2 partitions were created 8gb for the root filesystem ext4 and 2gb for swap.
The problem I have is after the install is finished and I remove the usb stick then reboot it just boots into Windows 10, there is no sign of Grub giving options of Debian or Windows. I believe that this problem is caused by the fact the SD/MMC card is used in place of a proper hard disk but I don't know how to fix this.
I have searched and read numerous articles but they either assume I can run a live cd (which I can't because of the 32 bit uefi bios) or have another linux machine, which I don't. I have a 32 bit Macbook with Snow Leopard on which I also plan to migrate to Debian so both will be the same, but will take a look at that after first resolving the problems with the Toshiba.
Ultimately I want to get rid of Windows 10 and just have Debian but want to make sure I can get everything working first. The Broadcomm ethernet adapter does not have a driver found during the install so there may be some other bits of hardware to sort out as well.
I have been messing around with the ubuntu family for some time now, and usually have no problem finding my answers. This one, however, is giving me some trouble. I have been using ubuntu on my laptop for some time now, and recently got a new 2TB hard drive for my desktop. I cloned the old hard drive to the new one, and decided to install ubuntu onto a third drive. The third drive was IDE, the new one is SATA. I disconnected the other hard drive, and so my current set up is a SATA drive with Windows 7, and an IDE drive with Ubuntu (11.04 of course)
Well, I am unable to dual boot between the two, unfortunately, and would like to figure out how. I would like to say the problem is with Windows, since that is the primary drive. No GRUB shows up upon booting when both drives are plugged in, and the Windows Bootloader does not show my installation of Ubuntu, instead it goes right to Windows.
mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedHow to install either Fedora 11 or 12 from the hard disk of this old ragged laptop? USB or CD installation are not an option, and since the documentation keeps crashing and I stagger saliently in the messy script that is hid behind the windows interface runtime gimmick, I would like to know which switches would make the rebooting operation take to reckognizing the linux package?
View 1 Replies View RelatedI'm trying to install Ubuntu 10.04 amd64 on a system I recently built that currently has Windows 7 installed.
Strangely, when I booted from the install disk, I got an unrecoverable error. [URL] said in that case, try to install from a live session, so I did that.
Live session install worked fine until I got to the partitioning section of the setup. Nothing displayed in the partition space and all my partition options were greyed out!
I have tried several things. I tried booting from my Lubuntu 32 bit that I know works (running on my laptop), it could not detect the hard disk either.
I tried booting into Windows 7 and shrinking the partition in the Windows partition manager and seeing if Ubuntu's installer would detect the space that way...no such luck.
cfdisk would not work either. Gave a big fat cannot access the disk error.
fdisk -l displays nothing. Gparted from the live session is a no-go as well.
BTW, relevant hardware:
GIGABYTE GA-770TA-UD3 AM3 AMD 770 SATA 6Gb/s USB
Western Digital Caviar Blue WD5000AAKS 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
I wouldn't think that Ubuntu should have a problem detecting this...