OpenSUSE Install :: Deleting SDA Partition On Multi OS Disk And Grub Booting?
Mar 17, 2011
That is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
Windows 7 x64 was the only install with a separate boot partition which was already on the Dell laptop. I then shrunk the partition to allow me to put opensuse on. Then I made the stupid mistake of deleting the opensuse and boot partitions while in Windows. I was going to do this, copy pictures of my new born baby off then reboot and delete all stuff and redo all the partitions and installs again.Now I just get grub rescue with the following when I do ls command:(hd0) (hd0,1) (hd0,2)I would like advise on how to get the data off, I cannot afford to lose my babies pics as there are no other copies. I will then do a normal install of opensuse first then Windows 7 after it.
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3 sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code: root@PartedMagic:~# fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes
My cousin just deleted his Linux partition and another smaller partitio nand now Windows is not booting, no he does not have the recovery disc. When Windows tries to boot it goes to "GRUB" and says "partition not loaded". What are some GRUB commands? And is it possible to fix this without using the recovery CD?
I was dual booting windows 7 with opensuse 11.3 and then realized I wasn't ever using Opensuse. I then deleted the partition it was in and now I cannot boot into windows. Grub immediately takes over upon booting but doesn't detect any partitions. I tried booting from an opensuse cd and changing the boot order priority, but grub still comes up. I don't have a windows 7 installation disc
I'm trying to install a multi-disk (cd's) program and I've run into a snag. It's a windows program so I'm using Wine. The installer is asking for the second disk of a two disk set. However, the program won't release the drive so it won't open. I've searched a bit and discovered the command "eject" but it tells me I'm not root so I can't do that. I'm also worried about the consequences of typing a command I'm not familiar with (as root). I don't want to unmount the drive if that will disable it when I'm not confident I could remount it given my lack of expertise. I just want to eject the disk.
I tried the "straightened paper clip in the little hole on the drive" method. It didn't work. It knocks the drive out somehow and I had to cancel the installation to get it working again.
My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.
The OS is on both systems is openSUSE 11.1.
On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.
When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.
I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.
I have two questions:
- is my assumption correct, or is something else going on?
- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?
You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.
I have Windows 7 and openSuse on my Acer Aspira 5532. I find that after using it, I'd rather get rid of Windows 7 all together. However, I want to be careful not to remove the partition that has the Windows 7 Reinstallation boot disk just incase in the future I wish to go back to Windows. Is there a way I can make my entire computer Linux (no dual boot) but also not deleting the Windows 7 reinstallation partition?
Further, can someone example why, on Boot, I have like 5 options to choose from? Like two openSUSE versions, failsafe, Windows 1, and Windows 2....? To be honest, when I installed openSUSE, I just did the recommended partition job that it suggested. I don't know much about partitions.
I wanted windows to appear first in my grub2 menu so I renamed the 30_os_probe file(or whatever it felename is) to 09_os_probe so that it comes before the 10 linux file, problem is whenever these files get updated the updater is unable to find the 30_os_probe file since I renamed it and recreates it... leaving me with two versions (09 and 30) with 09 being of course outdated.
The updater also fails to run update-grub and instead attempts to update grub.cfg manually... and fails. I had to manually do a sudo update-grub.
Is there any way to fix this so its all updated automatically while leaving windows the top choice? No manual intervention required beyond clicking "install updates"?
Also, is it possible to JUST have the Windows and Ubuntu choices, no Ubuntu recovery, memtest, alternative(older) kernels for Ubuntu, etc in the grub menu?
I have two hard drives windows 7 is on one of them and Ubuntu 9.10 is on the other. Both drives are 320GB, but different models of drives by Seagate. Both drives are detected by the BIOS and both drives are detected by Windows, but only one drive is detected by Ubuntu during the installation process. I had to literally disconnect the Windows drive to get Ubuntu to recognize the drive I wanted it on. Now that Ubuntu is completely installed and a new Kernel has been downloaded and installed it finally recognizes both drives as existing.
There is some kind of problem with the Installer and the original Kernel that kept it from seeing the second drive. I will literally have to manually edit Grub to get it to boot the Windows drive. How do I edit Grub? and what kind of Grub command would do the trick? I searched for "multi-boot" and literally read them all, there was one thread about multi-boot on multi-drives, but it did not fit because the Installer recognized both drives with that thread. I have to change the boot order in the BIOS to get the drive to boot that I want currently.
I downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
I have a major problem with Windows 7's MBR. I deleted Ubuntu's partition last night, and when I restarted, I saw: Code: error: no such partition grub rescue> I looked it up, put some code into a LiveCD terminal, and I thought it worked. But now, I says that I definitely need to put in a Windows 7 CD and do that MBR fix method. I did not own a Windows 7 CD; my laptop came with it pre-installed, and I have no recovery partition anymore.
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
I want to install a minimal version of linux (probably oS 11.4) onto a partitioned 1TB USB drive to serve as a standalone, bootable restore mechanism for a couple of machines.
First off, is this feasible?
Second, how do I go about it? I was able to install the system to the drive but how do I make that drive bootable? So far, I can't even get it to boot from the grub menu on the first internal hard drive as the system complains loudly about not being able to read disk descriptors and such. I tried the various boot spec (chainloader, menulist, etc) with no luck. Do I need to disconnect all the internal drives then install as if it were the only hard drive in the machine with the DVD reader?
I am assuming that I need some sort of bootstrap code in the MBR of the USB drive to get started but I'm a bit lost here and would appreciate any input, especially from some one who has tried this, before I spend anymore time on it.
I'm a CS Major that wanted to experiment with Linux more. Great idea right?! Well, long story short, I have a HP Dv9815nr Entertainment Notebook PC with Vista pre-installed. I have 2 local SATA HDDs and installed Vista(250GB) and Fedora 12(160GB)(respectively). In order to make life simple for booting purposes, I partitioned the Vista drive to include a 3GB sector for the Fedora Boot partition, so that Grub would run properly.
I recently discovered Sun's VirtualBox (Open Source Virtualization software) and installed several flavors of linux inside of this application on the Vista Disk. Naturally, I installed Fedora 12 in the Virtual Box and reformatted the Linux drive (160GB + 3GB Boot partition).
Everything was fine and then I rebooted. Now I get a Grub error on boot. "Error 22 : partition not found". I would like to restore the Vista MBR using the Fedora 12 Live cd, but I can't repartition the Vista drive under the live installation.
Also, I extended the Vista partition to include the 3GB previously used for the Fedora Boot Sector.
I would like to build a sticky subject about repairing openSUSE boot.This article,once complete (not by me alone) should be made sticky (to have it in front of the forum)- these problems are frequent and disturbing.I know the great work done by please-try-again. But very often we don't need any script (and running a script from rescue mode is difficult) - that said I vote to have the pta scripts included in the rescue system !So I would like to focus on command line fixes.
I'm just using a plop boot cd...it does what I need, boot from hdc 2. or (hd2,1) I'm having an issue, because Im not sure how to change the mbr so when I boot the computer from the third hdd, it just works...where is the MBR, and how do I edit it, or better, is there a GUI interface I can use?
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
I installed Opensuse 11.3 on a separate partition to vista on my Acer 5115. It runs fine but the GRUB boot loader failed to show the Vista OS. I tried to add it by editing menu.As far as I can see (and I don't have much experience with these things) the Vista OS is there, on sda5, but doesn't boot correctly because the winload.exe is in the wrong directory. Why the sdax numbers are all rearranged is a mystery too, but I have reinstalled vista several times so that could be why.I don't have a vista recovery cd (wasn't given one), is there any way to fix this within opensuse (which works fine)?
I had to change disk order in bios and now I am unable to boot SUSE. My sda is now sdc(disk ID is still the same in fstab). Should I reinstall GRUB to MBR of hd0 or I will need to do something more.
I have been carrying out updates of both Vista & SuSE whenever i operate in them.
One (Not So) Fine Day, when i Choose from the Grub loader "Microsoft Windows Vista SP2" option it just din't boot into Vista. I have Tried many a time.
My First doubt was towards Vista only, so i choose the "Windows Recovery Mode" option from Grub. It went into the Recovery mode. I ran Memory Tests on Windows Partition, took its own sweet time, whatever missing indexes and all it carried out and finally gave the Thumbs Up result. After that, i carried out Startup Repairs, all came out well. So, Yet again i restarted and tried to get in Vista. Nope, dint work.
I'm dual booting Windows 7 and openSUSE. I attempted to start up my computer, and got ERROR 17 on the GRUB loading page. I am assuming this is related to me disabling the openSUSE uninstaller on startup in Windows.installer seemed completely superfluous.
Just did a clean install of 11.3. After first try, system couldn't boot for hard drive. When installing a second time, I noticed that booting from a boot partition and the MBR are disabled by default. I enabled both and proceeded with the install. System now boots fine. Since the automatic partitioning created a boot partition, I'm assuming that that is where the system is booting from and I didn't need to enable booting from MBR, but am not 100% sure. So make sure to at least enable booting from a boot partition
I'm wondering how I would go about dual-booting Ubuntu with openSUSE installed first?
I'm just a little bit concerned about the versions of Grub overwriting the openSUSE version or theme or something.
Would it work okay if I just shrink my openSUSE partition and then set the Ubuntu installer to install Ubuntu to the free space only or do I need to edit the grub file and stuff?
I'm having trouble getting a system to boot. Specifically, I think the MBR is trashed and I don't know how to repair it. I'm scared to experiment The system has a PATA DVD drive, a SATA drive via a motherboard connector and two 3ware RAID controllers. I can boot systems from the DVD drive but when I try to boot from the hard drive grub says Error 2 (which is a stage 1.5 error, I think).
The m/b SATA drive has both a 10.3 and an 11.1 system installed, on partions 2 and 3 respectively. Partition 1 is a swap partition. The RAID arrays are whole-disk LVM systems containing data. I want to run the 10.3 system. The BIOS is set to boot from the DVD then the m/b SATA, and NOT to boot from the RAIDs. Two issues worry me: grub's disk numbering and grub version dependency. If I boot into the rescue system on the 10.3 install DVD it shows the partitioned disk as /dev/sda. If I boot into the rescue system on the 11.1 install DVD it shows the partitioned disk as /dev/sdc. I suppose that means something in the kernel changed?
If I run grub in the 11.1 rescue system, I can say "find /boot/grub/menu.lst" and it reports two files on (hd2,1) and (hd2,2). If I run grub in the 10.3 rescue system it says error 15 file not found.I'm scared to use 11.1 grub to setup hd2 because when I've tried previously I've managed to overwrite the LVM metadata on one of the RAID arrays. Is there some way I might get the find command in the 10.3 grub to work? Or is there some way to test what the 11.1 grub will do that is non-destructive.
Every time I start my computer, I get a message saying:
I press any key, and the start-up completes without further problems. The first line on the screen after I press any key is
I`ve looked on the web, and grub stage 1.5 seems to be where the size of the hard drive is identified. Problems often seem to be linked to partitioning. My hard drive has (since new) a 115GB and a 5GB partition.
When I try to access the 5GB partition, I get the following error message:
HP 6930 laptop 120GB HDD It had Win7 64bit installed across the whole drive (100MB sys reserved and C: taking up the rest), I was successfully able to shrink the C: partition to 60GB. So I know have a working copy of Windows 7 on 60GB with 60GB or free space. I boot to 11.4, the installer works great so far and is real fast, I get to the spot where I choose my partitions for nix(tried both auto and manual) then I click OK at the warning to start writing to the disk and ....error 1007, the installer is unable to create the partitions.
i built a rpm package, which i figured out later that i wont be needing, so i deleted the rpm file and also the build package put together they were abt 5.8 GB... but my system monitor shows that only 700MB of space is available the 5.8 GB is not visible but its gone
