my laptop(dell xps m1330) takes around 2'30" to boot, I don't remember when it started but it wasn't always that slow. even looking at bootcharts I cant seem to figure out what that could be
full-size bootchart here: [URL]
btw it powers down in less than 5 seconds
i am working with an old system that uses a BIOS meant for embedded systems. According to my coworkers this thing boot some version of debian about two years ago. currently I have used there old image and a new one I made of the latest Debian stable build. both images fail to get passed grub.
to be clear the BIOS simply replies "loading grub" takes ten minutes and then crashes.
has anyone ever had trouble with grub crashing systems? this problem seems odd since is did boot with this two years ago and i still have that image.
Title describes the problem rather well. After selecting Linux 2.6.23-22-generic 64-bit in the GRUB bootloader, I am staring at a black screen with a white flashing underscore for almost 2 minutes (usually between 1min40sec and 2min). The Linux kernel is loading here, and it's taking forever!
Once Plymouth starts it barely even manages to flash into view before it's done and I get to login, so bravo @ Canonical.
But seriously, I need that boot time cut down A LOT.
Since I'm assuming it has quite some relevance, here's all my installed programs: (So if you know any offenders you can point them out)
EDIT: I can see it also lists packages I've removed after installing them. Removed packages are listed as "deinstall" and are, obviously, NOT installed or functioning, but their config files remain I assume.
Code:
acpi-supportinstall
acpidinstall
adduserinstall
adium-theme-ubuntuinstall
aisleriotinstall
[Code].....
I just installed fedora 12 on my new harddrive, and it's booting up extremely slow (but once I'm logged into the system, it all seems to run fine). Right now my set-up looks like this: 1TB HD: new install of fedora 12 300GB HD: Windows xp & my previous install of fedora 12
My previous installation of fedora 12 never booted this slow until after I installed Fedora 12 on my new HD. It seems to freeze right before the log in screen, and after I log in, both installations take about a minute to get to a usable desktop. I pressed the Esc key during startup to see if anything was wrong, and it didn't hang up on anything. However, as it was loading the login screen (where it first begins to get sluggish), I was kicked out of the terminal view and forced to wait in the gui for log in.
It's been a while since this problem started. I have an Acer Aspire 4720z laptop with Ubuntu 10.10 installed. My laptop takes a whole damn 1.5 minutes to boot up and login (measured according to bootchart; I have auto-login enabled) (The majority of this 1.5 minutes is taken up after boot up, so it might indicate a problem with Xorg.)I don't know whether this is relevant, but when I boot up, a message gets displayed: "ata4.01: failed to resume link (SControl 0)". Also, this problem started right around the time I upgraded from Lucid to Maverick, so it could be some problem with my upgrade.find the source of this issue.ATTACHED: bootchart image from last login.boot.log:
Code:
fsck from util-linux-ng 2.17.2
udevd[370]: can not read '/etc/udev/rules.d/z80_user.rules'
[code]....
I use fedora 13, recently updated. I used to have an issue with wine fonts but it got solved once i upgraded. What isn't solved with the upgrade is the awful long time it takes wine to load anything. any suggestions? It's hard to find a solution on the internet for this issue cause if i search wine takes to long to load it returns how long does wine have to stay in a cellar.
View 10 Replies View RelatedIs that normal for Ubuntu Linux to take 5 to 10 minutes for computers to show up in the Windows Network Neighborhood in Nautilus after startup. It also takes 5 to 10 minutes to show Samba shares on my windows computer using NetBios (not however by entering ip). Is there a lag because of a set time of netbios network broadcasts to exchange netbios information to resolve by WINS. Is there any way this can be sped up so I can use my network immediately? Is there any way to force these broadcasts?
View 1 Replies View RelatedThis is kind of cross post from the 10.10 beta forum, but since that thread went by without a solution, forum (and thread) are locked and this problem still exists, I'll try again.
When I reboot my machine, it seems to go pretty quickly. However looking at the log it seems that most everything is running after about 8.6 seconds, and then USB starts loading up. The first log entry regarding USB comes at 32 seconds, second one at 62 seconds. The keyboard starts working at 84 seconds and the mouse at 166 seconds.
Note, this same system was running 9.10, 10.4 and various other distros I tested without such problems...
I've removed all hubs, everything is directly connected to the computer. code...
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
Hardware: Toshiba NB200 with Atom 280 & 2GB, 160 GB HD Everything works great except the boot time. My default boot is F11 & when the system starts in "yuk" Windows it only takes a few seconds! but when I start in F11 it takes 15 - 20 minutes for it to start. No error messages, nothing in dmesg, standard configuration. The same system with Win XP & F10 worked fine?
View 4 Replies View RelatedI installed a theme the other day, along with some fonts and some icons. Immediately after that, the time from logging in until I see the desktop is horrible, several minutes. I've removed (as best I can tell anyway) the theme, fonts, and icons, but the delay is still present. Any tips on where I might look to find the source of the trouble? I've tried moving to a different virtual terminal after logging in at the Gnome display manager (this is on ubuntu 8.10), so I could hopefully look at the running processes but the delay happens there as well. Once the desktop becomes visible everything seems to run at normal speed.
View 1 Replies View RelatedAfter mapping iscsi storage from my netapp and scanning for new devices I run multipath -v2 to create the multipath device handle under /dev/mapping/. This normally takes about 2 seconds or less on every other linux distribution I use. On Stretch it takes a little over 3 minutes. I have tried several different versions of multipath.conf but the result is always the same.
My most recent multipath.conf file is available here : [URL] ....
and the output of multipath -v4 is available here : [URL] ....
I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.
View 2 Replies View RelatedI have been having trouble with Ubuntu 11.04 when connecting to the Internet via Wireless Networking. It will connect, and has good speed once it connects, however it takes upward of 10 minutes and over 20 times of me clicking 'Connect'.
Is there a way to connect to a wireless network quicker? My network is unsecured and without a keyring. It is not only slow connecting to my network, but the network of other's.
lspci information:
Using Excel 2010 on a regular basis and have just had a new server installed at work. Since all 6 computers are joined on our network we seem to be having problems with opening Excel and when it does eventually open, it takes around 3-5 minutes to save a spreadsheet.
View 1 Replies View RelatedI just installed 11.04, and the software center is almost unusable. I'm currently clocking about 32kb/s on my modern laptop. Does anyone know how to fix this? PS- During install, it took 20 minutes to download the language packs, and it said I would be there close to forever for the update downloads.
View 8 Replies View RelatedBeing a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
I log on to a lot of different servers at work to do some tasks and install new software. However, sometimes I find myself wanting to know what has been done to the computer recently. This usually involves me going through log files and just observing the filesystem for new folders/files (usually in /tmp).
Is there some kind of a master log file which logs all (or nearly all) "activity" on the computer. Even getting a list of most recent command line 'history' from different users would be helpful to see what they did in the last couple hours. I only need to know the big things:
new software installs
important files being changed
new users/groups being made
Am I asking for too much from my system? If this doesn't exist I might just develop a tool to do it. In that case, which files should I be looking at to extract the information I want?
my system stopped booting after recent update.When I select desktop it goes to splash screen an dies.Have to hit reset key.If I select nomodeset it boots fine excepts graphic resolution is 1280x1024 instead of 1680x1050.System is sandy bridge, Asus P8H67-M EVO, Intel Graphics enabled no other grapics cards, Suse 11.4 64 bit.I do my updates with zypper up.
View 9 Replies View RelatedI have a Fedora 11 distro running on a desktop machine. It has always reported a hard disk may be failing but have not had trouble with it for over a year. This past week, I had to reboot the machine and it took several tries before it succeeded. How can I replace the offending drive and save my current software installations and data?
View 3 Replies View RelatedUpgraded to 2.6.32-32-generic, it takes about 20 seconds after login at boot up; previous version only takes about 13 seconds. They are at the same environment and service status.(ubuntu 10.04)
View 1 Replies View RelatedI recently changed my computer so it would auto boot into Ubuntu, but if I hold down the shift key, I can bring up the GRUB menu so I can choose Windows in the rare times I use it[URL]Anyway, I noticed that when I did that, it actually took longer to boot. I timed it today and it took 45 seconds from the time I pressed the power button to get to the login screen! My friend uses Linux a lot and says even with Ubuntu (which he thinks is "too slow") it shouldn't take that long.
View 1 Replies View RelatedI am having this problem with F 10. First I get the infamous message: Could not detect stabilization, waiting 10 seconds. at the beginning of the booting process. then after I initiate startx, I use gnome, all works fine and only for few minutes and the system freezes. At first the mouse freezes, then after 30 seconds or so, the mouse's cursor can move but clicks are ineffective, not even Ctrl+Alt+Backspace, or Ctrl+Alt+Del. I have to do hard reset.
View 14 Replies View RelatedServer with Centos 5.6 stop boot up for about 90 minutes. He stop:
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1307803697.466:2): selinux=0 auid=4294967295 ses=4294967295
[Code]...
I've been having this glitch since Maverick. I hoped installing Narwhal would solve it (clearly not), I like Ubuntu, but this makes the OS frustrating and pretty much unusable, forcing me to stick with Windows.
The glitch appears randomly but mostly within 5-10 minutes after booting.
Another thing : when you want to screenshot the glitch, it usually gives you a perfect image, with everything OK. I have no idea why it worked now. I have a Packard Bell Dot M Netbook.
Less than 2 days ago i upgraded from slackware 13.0 to 13.1.Since then, I have not been able to use my laptop for more than 15-20 minutes, 'coz the KDE screen freezes all of a sudden without any crash report and in some time the screen goes blank with just a mouse pointer to be seen (Black Screen of Death?)I can do a CTRL-ALT-F* to switch to a console a continue, or reboot (using console) to get the X server started again. (CTRL-ALT-Backspace does not work either).
View 9 Replies View Relatedi have 2 installations of ubuntu 9.10KK on 2 different computers. Both ahve cpu clocks of 3+ Gigahertz, 64 Bits, and both have 2 gigs of ram. So, my secondary laptop is just sitting there, not being used, and i wanna put it to good use considering that its still a like new laptop.
How to use it was to make it a server farm (or whatever its called) where the head computer takes the slaves power for itself. I know this is possible (i.e their called super computers but its just 2 high power laptops. I googled around and searched on the forums too and found nothing.
When I first turn on I get the windows boot manager where I can choose between openSUSE 11.2 installer (LOCAL) and Windows Vista. Selecting either has the same result of trying to boot the openSUSE. This results in error 17 and pressing any key takes me to the GRUB4DOS where I can get to the command prompt.
View 9 Replies View RelatedWhile booting Linux it takes ages for 'enabling swap space'
I have allocated swap space twice that of the RAM.
Is there a way to fix it? What should I do to avoid this in the future installs?
my fedora 10 booting stops at starting udev for 5-6 minutes.when i pressed 'i' for interactive , i see ata3(i think its my DVD-R/W) responding too slow. so, booting stops there till it responds.o/p of
Code:
dmesg | grep -i ata3
gives
[code]...