Ubuntu :: Computer Farming - Head Takes The Slaves Power For Itself
Aug 17, 2010
i have 2 installations of ubuntu 9.10KK on 2 different computers. Both ahve cpu clocks of 3+ Gigahertz, 64 Bits, and both have 2 gigs of ram. So, my secondary laptop is just sitting there, not being used, and i wanna put it to good use considering that its still a like new laptop.
How to use it was to make it a server farm (or whatever its called) where the head computer takes the slaves power for itself. I know this is possible (i.e their called super computers but its just 2 high power laptops. I googled around and searched on the forums too and found nothing.
View 7 Replies
ADVERTISEMENT
Nov 15, 2010
I recently changed my computer so it would auto boot into Ubuntu, but if I hold down the shift key, I can bring up the GRUB menu so I can choose Windows in the rare times I use it[URL]Anyway, I noticed that when I did that, it actually took longer to boot. I timed it today and it took 45 seconds from the time I pressed the power button to get to the login screen! My friend uses Linux a lot and says even with Ubuntu (which he thinks is "too slow") it shouldn't take that long.
View 1 Replies
View Related
Oct 28, 2010
my laptop(dell xps m1330) takes around 2'30" to boot, I don't remember when it started but it wasn't always that slow. even looking at bootcharts I cant seem to figure out what that could be
full-size bootchart here: [URL]
btw it powers down in less than 5 seconds
View 6 Replies
View Related
Mar 30, 2010
This computer freezes, requiring power-off, somewhere between 2 seconds and 2 hours after boot-up, most every time I use it. Sometimes I've had to power-down perhaps six times in 10 minutes. When it freezes I have a movable mouse-pointer that can select nothing. Right-
click does not operate. I don't seem able to isolate a single cause. I ran a RAM check with no errors showing. Matters not which version of Ubuntu I choose when booting. I've replaced mouse and keyboard. Only running 256 meg of ram and do plan to
View 9 Replies
View Related
May 16, 2010
just recently I upgraded from 9.10 to 10.04. Now whenever I shut down computer gets stuck after umounting disks etc, so I have to shut down using power button, similar to this error[URL]
View 2 Replies
View Related
May 23, 2010
In 8.04 even a non-power user could turn off the computer even if other people was logged in, not anymore. How do I enable it again. I don't want to let all my user be power-users, but I will let them turn off the computer locally even if someone else is logged in.
View 4 Replies
View Related
Mar 1, 2011
I have critical battery, it's always on 1%. Today the power went down so i tried to shutdown computer. I clicked on Shutdown, it asked me if i am sure and that was it. But when power was on i tried to turn on computer but get error. It's blanc screen with some text. Here is text at the end:
[code]...
What to do to fix this?
View 4 Replies
View Related
Dec 15, 2009
This OS is has been cloned from the drive of another computer. The motherboard is now an SIS730. I assume the hardware is sufficiently different to prevent the OS from shutting down the computer.How do I fix this? ---without installing, if possible.
View 2 Replies
View Related
Feb 3, 2011
So everytime I resume Ubuntu from hibernation, it remains black for a time then 2 messages on the screen appear for about 10 seconds before I can log-in:
Code: [ 0.556247] [drm:init_ring_common] *ERROR* render ring head not reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000 [ 0.556320] [drm:init_ring_common] *ERROR* render ring head forced to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
View 3 Replies
View Related
Aug 20, 2010
It seems that the updgrade that I made in my ubuntu 9.10 to 10.04 turned to be a downgrade... I am having some glitches here!
First, started off that I couldn't turn off or reset my computer using the power buttons, it simply logs out.
I found a similar problem in a thread and I got this solution:
Code:
Then I forced it to shut off with the command: sudo poweroff
When I turned it on again my icons like Trash bin, Netowrk meter, Keyboard layout have disappeared from my panels...
And it doesn't shut off anymore (it did for a couple times only).
View 2 Replies
View Related
Dec 31, 2010
I've been using Windows Home Server as a Backup Appliance, Media Server and Share Server at home for some time. I decided it was costing me allot of juice so very early on added the "Lights Out" add-on to ensure it was only running as and when needed.
I'm now looking to switch to a Linux based server and I'm looking for a similar tool/set of tools for advanced power management.
Now the question;
Anyone got any all-in-one suggestions (i.e with client parts for both Windows and Linux and a server part for the Linux server), or can anyone simply verify that I'll need to set-up all the individual bits for this myself separately?
View 4 Replies
View Related
Jul 8, 2009
I have a Genius K627 Keyboard with Power, Sleep and Wake buttons. ACPI is unsupported on my computer, but it can turn off its power supply when the system halts (PM is ok). I would like to bind the Power key on the keyboard to execute the /sbin/halt command. What I already know is that I can specify an event in inittab (kbrequest) that would execute a command. What I don't know how I can make my system receive pressing Power button as a kbrequest. The scancodes of Power button on the keyboard (by showkey): 0x74 0xf4
This is the line I was talking about in my inittab:
Code:
ce:12345:kbrequest:/sbin/halt
I think I should edit /etc/console/boottime.kmap.gz but don't know how I could insert this scancode into it.
View 8 Replies
View Related
Dec 31, 2010
How to setup LXDE (a linux desktop environment) to hibernate a PC after the power button on the computer is pressed?
View 1 Replies
View Related
Oct 13, 2009
I am running Centos 5.3. I ran no updates, performed no installs, nor changed any configuration immediately prior to this issue. My problem is this: when I run the command startx (default runlevel 3), it is a long time (5-10 minutes) before Gnome startx, and once it does start applications will not run. Also, when I try to use sudo (from any environment, even ssh), it is a long time (5-10) before the command is executed.
I cannot say for sure, but it seems like this is an intermittent problem. Sometimes X takes a long time to start, but once it starts it will launch programs. Sometimes X takes a long time to launch, but once it starts it will only launch certain programs. Though presently X always takes a long time to start, and I cannot successfully launch any programs.
A while back a had a similar problem to this (x taking long time to start, sudo taking long time to execute) and it ended up being a DNS problem. Unfortunately, I cannot remember exactly what it was and I stupidly did not document it. Maybe this is also DNS related, I don't know.
I don't know what log files to look at for problems with X, Gnome, and sudo taking a long time to start.
View 19 Replies
View Related
Jun 21, 2010
I am using Ubuntu 10.04 64-bit and I purchased a new ALFA AWUS036H wireless card. I would like to know if this "1Watt" wireless card is configured for full power. iwlist wlan0 txpower results:
wlan0 unknown transmit-power information. Current Tx-Power=27 dBm (501 mW). It appears to me that I should be able to increase the power. "iwpriv wlan0 highpower 1" does not work. Do I need to patch the new default driver that comes with Ubuntu 10.04 64-bit with the aircrack one following these directions:[URL]...? Monitor mode and a injection tests seem to work fine with the driver I have installed.
View 2 Replies
View Related
Jun 4, 2010
I use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
View 2 Replies
View Related
Apr 4, 2011
I'm looking for any power monitoring devices for Linux to allow monitoring power quality, voltage changes, and outages. This would be for North American three phase power system. I want to have this data fed live to my own program. It should be something much better than just jury-rigging a circuit to fee the power waveform into 2 or 3 audio cards.
View 10 Replies
View Related
May 28, 2010
On the last release, I had this app installed where I could pick my power profile. I could use power conservatively, and performance would suffer a bit, but longer batt life,or I could have it automatically detect, or I could have the apps use all the power they want and then some. I'm looking to reinstall that app. What was the name of it?I can't remember, and so far, can't find.
View 2 Replies
View Related
Oct 30, 2010
I had unplugged my PC last night as sometimes there's storms at night this morning I plugged in PC and the power light is blinking and the PC wont come on at all tried different power cord, same result
PC is a AMD athlon64 3300+ 2.4ghz SiS graphics
probably the power-supply or what?
If it is the power supply, how do I find new one as I've never had to replace anything on it or any other PC?
Also, I really need access to the hard drive but it's a weird hard drive and was wondering if I could put that hard drive in my K7 PC, which already has 2 drives in it can a pc have 3 drives? do I have to add/have another ribbon cable for 3rd drive?
View 4 Replies
View Related
Oct 15, 2010
After much research, I have found the solution to my intermittent wireless problem!Whenever the laptop is plugged into power, wireless is perfect, when I'm on battery, wireless is horrible.Here is the fix:
Code:
sudo iwconfig eth1 power off
Unfortunately, I have to type this in everytime I unplug the laptop.
[code]....
View 3 Replies
View Related
Feb 6, 2010
Why is it telling me that my hard drive cylinder head count isn't supported by bios when I've been using this hard drive with this bios for over a year? I mean Linux is booting off the hard drive this is supposedly unsorted apparently and managing telling me is unsupported... so it can't be that unsupported now can it? Sounds more like linux trying to blame bios for linux's problem.
View 3 Replies
View Related
Mar 16, 2010
I'm setting up my menu.lst for GRUB Legacy (downgraded from GRUB2 in 9.10) and I'm just having difficulty getting my head around converting the /dev/sda1, sda2 etc to hd(0,0), (0,1).
My partitions are as follows:
sda1 = Windows XP (ntfs primary partition)
sda2 = Windows Vista (ntfs primary partition)
sda3 = Linux boot (small ext2 primary partition)
sda4 = extended partition
sda5 = Windows XP second different installation (ntfs logical partition)
sda6 = Ubuntu 9.10 root (ext3 logical partition)
sda7 = linux-swap (swap logical partition)
As I said, I am trying to set these up in GRUB, but cannot work out what all the hd(0,x) equivalents are. I *thought* it was just a case of subtracting 1 from the sdax number, but it doesn't appear to be that way.
View 2 Replies
View Related
Apr 1, 2010
I would like to be able to change the Head Line / Title to include the working "fixed, solved" or some thing similar, in bright green ot red, maybe blue
View 2 Replies
View Related
Jun 18, 2010
My problem arises two days ago. Power button of my keyboard has stopped working,why?It works well when I use windows.
View 2 Replies
View Related
Jun 14, 2010
I am trying out conky for the first time and rather enjoying it. I have a small frustration though. I have a dual head setup and would like to have identical conky's showing on both monitors. I have tried creating two .conkyrc's (.conkyrc1 & .conkyrc2) and then using:-
Code:
$ conky -c config1
$ conky -c config2
to launch them, this results in only one of the two conky's displaying. I did at first think that maybe they were on top of eachother, but one conkyrc is set bottom_left, the other bottom_right so they should not be right??
When I try to run them as above terminal shows:-
Code:
gregg@burt:~$ conky -c config1
Conky: invalid configuration file 'config1'
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: invalid num arg for top. Must be between 1 and 10.
Conky: forked to background, pid is 7017 .....
#NETWORK
${font Sans:size=9:weight=bold}${color grey}NETWORK ${hr 2}$color${font Sans:size=8:weight=bold}
${color grey} DOWNLOAD UPLOAD
${downspeedgraph eth0 30,115 000000 00ff00} ${alignr}${upspeedgraph eth0 30,115 000000 ff0000}$color
Processes 8 & 9 do not appear in my conky, just blank space between 7 & 10?? Also, the swap %age displays 'No swap%'?
View 6 Replies
View Related
Jun 19, 2010
I just installed lucid on my laptop with a second screen. Unfortunately, I cannot display any video. Neither on the laptop screen nor on the second external screen. In contrast, rebooting without attaching the external screen allows me to display videos again.
I never experienced this kind of behavior with Ubuntu 9.10.
Graphic card: Intel 945
Let me know if you need further information.
View 2 Replies
View Related
Jul 19, 2010
I have been trying to figure out if Eyefinity will work in Ubuntu 10.04 for three monitors. I can test this at work where we have three monitor, one with a display port connection. I just want to know if it is worth trying, and if so what catalyst drive might work.
So I have done a lot of searching and have found a number of yes and no answers.
To start with Lanchpad has a change log saying it should work.
[url]
This guy says it work once did but does not now.
[url]
Then someone tries and fails with Catalyst 10.6. Seem like a lot of other good info here.
[url]
Then to finish it up these guys have some rumors that seem to say Catalyst 10.7 will support this.
[url]
I think I will wait for Catalyst 10.7 and then give it a try.
View 2 Replies
View Related
Jul 11, 2011
I'm trying to get rid of my dedicated media center and connect my desktop to my TV instead. No matter what I change I get no picture at all on the TV when connected to the desktop. I already have two LCD monitors using nvidia's "TwinView" mode and I want the TV to just be an extension of this, at a lower resolution.
My system information is below, but note that anything in the tag " ### NEW {}" in the xorg.conf is my attempt at getting this to work, the rest was already there. Two LCD monitors are screens 0 and 1, the TV is screen 2.
Code:
View 1 Replies
View Related
Jan 11, 2011
I'd like to convert some of my backed up ripped DVDs to an .avi with separate subtitle file. I have been looking at MEncoder but I can't get my head around the commands or how multiple .VOB files become a singular .avi file.
View 2 Replies
View Related
Jan 28, 2010
I'm looking at the 2009 apple mac mini ([URL]and wondering if anyone has gotten dual head working? I'm putting two 17" or 19" monitors on, so nothing too adventurous. I know that I'll require the "Mini-DisplayPort-to-DVI" to get Dual DVI Adpaters, but I wanted to confirm that dual head would be supported from the start. I'm aware that there are issues with rebooting the device, possibly as a result of the wireless drivers. That doesn't bother me. Dual-head is a requirement I intend installing 9.10 and dual booting macos for firmware updates.
View 1 Replies
View Related
