Ubuntu :: Mouse Takes Minutes To Start Working After Boot / Fix It?
Oct 13, 2010
This is kind of cross post from the 10.10 beta forum, but since that thread went by without a solution, forum (and thread) are locked and this problem still exists, I'll try again.
When I reboot my machine, it seems to go pretty quickly. However looking at the log it seems that most everything is running after about 8.6 seconds, and then USB starts loading up. The first log entry regarding USB comes at 32 seconds, second one at 62 seconds. The keyboard starts working at 84 seconds and the mouse at 166 seconds.
Note, this same system was running 9.10, 10.4 and various other distros I tested without such problems...
I've removed all hubs, everything is directly connected to the computer. code...
Hardware: Toshiba NB200 with Atom 280 & 2GB, 160 GB HD Everything works great except the boot time. My default boot is F11 & when the system starts in "yuk" Windows it only takes a few seconds! but when I start in F11 it takes 15 - 20 minutes for it to start. No error messages, nothing in dmesg, standard configuration. The same system with Win XP & F10 worked fine?
I just installed fedora 12 on my new harddrive, and it's booting up extremely slow (but once I'm logged into the system, it all seems to run fine). Right now my set-up looks like this: 1TB HD: new install of fedora 12 300GB HD: Windows xp & my previous install of fedora 12
My previous installation of fedora 12 never booted this slow until after I installed Fedora 12 on my new HD. It seems to freeze right before the log in screen, and after I log in, both installations take about a minute to get to a usable desktop. I pressed the Esc key during startup to see if anything was wrong, and it didn't hang up on anything. However, as it was loading the login screen (where it first begins to get sluggish), I was kicked out of the terminal view and forced to wait in the gui for log in.
It's been a while since this problem started. I have an Acer Aspire 4720z laptop with Ubuntu 10.10 installed. My laptop takes a whole damn 1.5 minutes to boot up and login (measured according to bootchart; I have auto-login enabled) (The majority of this 1.5 minutes is taken up after boot up, so it might indicate a problem with Xorg.)I don't know whether this is relevant, but when I boot up, a message gets displayed: "ata4.01: failed to resume link (SControl 0)". Also, this problem started right around the time I upgraded from Lucid to Maverick, so it could be some problem with my upgrade.find the source of this issue.ATTACHED: bootchart image from last login.boot.log:
Code: fsck from util-linux-ng 2.17.2 udevd[370]: can not read '/etc/udev/rules.d/z80_user.rules'
Machine Specs: Asus P5B Deluxe w/ Intel Core 2 Duo E8400, 8gigs of ram and an Asus GeForce 8400 GS. I downloaded and installed the x86_64 DVD Installation disc for Fedora 11 the day of the release. I allowed the installer to utilize 100% of the disk with the default partition configuration. I only installed KDE.
Upon first boot the machine didn't boot in under 20 seconds, but it wasn't slow enough to give it any though. Once logged in, everything ran great. The system has been running great since the launch date. I rebooted once or twice since them and thought the same thing as the first boot, not particularly fast, but not slow enough to care.
This morning I rebooted and it almost seemed broken. It takes about 20 minutes to get past the loading bar, and way too much time to log in. When the loading bar is going I hit escape. It looked like "Starting system message bus" took the longest, but it wasn't the only slow thing. After some more time, the background for the log in prompt appeared. Once the log in prompt fully appeared I mistyped my password. It took a good four minutes to authenticate unsuccessfully. I reentered my information correctly. It took another four minutes for the prompt to disappear, then it continued to load very slowly.
When booting up eb4 distro (eebuntu)mouse pointer although active during start-up disappears when gnome is started for 5-10 minutes, sometimes longer. Gnome failsafe it will appear but I can not identify the fault.
It takes a few minutes to start during boot and I just did a fresh install in a virtual machine. Haven't touched sendmail so it has default config. Someone told me it could be a DNS issue, but I can do DNS lookups and navigate the web well.
I have a Dell Vostro 200. Have been running Ubuntu on it for 18 months - no probs. Recently it became very slow to boot. 5-10 minutes before Ubuntu startup screen appears. Have installed Ubuntu 10.10 (on a reformatted hard drive) today. No change. It's fairly certain to be a hardware problem but I don't know where to start.
Title describes the problem rather well. After selecting Linux 2.6.23-22-generic 64-bit in the GRUB bootloader, I am staring at a black screen with a white flashing underscore for almost 2 minutes (usually between 1min40sec and 2min). The Linux kernel is loading here, and it's taking forever!
Once Plymouth starts it barely even manages to flash into view before it's done and I get to login, so bravo @ Canonical.
But seriously, I need that boot time cut down A LOT.
Since I'm assuming it has quite some relevance, here's all my installed programs: (So if you know any offenders you can point them out)
EDIT: I can see it also lists packages I've removed after installing them. Removed packages are listed as "deinstall" and are, obviously, NOT installed or functioning, but their config files remain I assume.
my laptop(dell xps m1330) takes around 2'30" to boot, I don't remember when it started but it wasn't always that slow. even looking at bootcharts I cant seem to figure out what that could be
I use fedora 13, recently updated. I used to have an issue with wine fonts but it got solved once i upgraded. What isn't solved with the upgrade is the awful long time it takes wine to load anything. any suggestions? It's hard to find a solution on the internet for this issue cause if i search wine takes to long to load it returns how long does wine have to stay in a cellar.
Is that normal for Ubuntu Linux to take 5 to 10 minutes for computers to show up in the Windows Network Neighborhood in Nautilus after startup. It also takes 5 to 10 minutes to show Samba shares on my windows computer using NetBios (not however by entering ip). Is there a lag because of a set time of netbios network broadcasts to exchange netbios information to resolve by WINS. Is there any way this can be sped up so I can use my network immediately? Is there any way to force these broadcasts?
I installed a theme the other day, along with some fonts and some icons. Immediately after that, the time from logging in until I see the desktop is horrible, several minutes. I've removed (as best I can tell anyway) the theme, fonts, and icons, but the delay is still present. Any tips on where I might look to find the source of the trouble? I've tried moving to a different virtual terminal after logging in at the Gnome display manager (this is on ubuntu 8.10), so I could hopefully look at the running processes but the delay happens there as well. Once the desktop becomes visible everything seems to run at normal speed.
After mapping iscsi storage from my netapp and scanning for new devices I run multipath -v2 to create the multipath device handle under /dev/mapping/. This normally takes about 2 seconds or less on every other linux distribution I use. On Stretch it takes a little over 3 minutes. I have tried several different versions of multipath.conf but the result is always the same.
My most recent multipath.conf file is available here : [URL] ....
and the output of multipath -v4 is available here : [URL] ....
I just installed a Brothers HL2170W printer on my desktop which is running Ubuntu 1004 I had no problem with the install and it is working. The problem is when I send a page to print it takes 5 minutes before it prints. Does anyone know if this is normal or if there is a fix. I have the printer connected with a USB cable.
I have been having trouble with Ubuntu 11.04 when connecting to the Internet via Wireless Networking. It will connect, and has good speed once it connects, however it takes upward of 10 minutes and over 20 times of me clicking 'Connect'.
Is there a way to connect to a wireless network quicker? My network is unsecured and without a keyring. It is not only slow connecting to my network, but the network of other's.
Using Excel 2010 on a regular basis and have just had a new server installed at work. Since all 6 computers are joined on our network we seem to be having problems with opening Excel and when it does eventually open, it takes around 3-5 minutes to save a spreadsheet.
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
I just installed 11.04, and the software center is almost unusable. I'm currently clocking about 32kb/s on my modern laptop. Does anyone know how to fix this? PS- During install, it took 20 minutes to download the language packs, and it said I would be there close to forever for the update downloads.
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
i am working with an old system that uses a BIOS meant for embedded systems. According to my coworkers this thing boot some version of debian about two years ago. currently I have used there old image and a new one I made of the latest Debian stable build. both images fail to get passed grub.
to be clear the BIOS simply replies "loading grub" takes ten minutes and then crashes.
has anyone ever had trouble with grub crashing systems? this problem seems odd since is did boot with this two years ago and i still have that image.
After logging into fedora about 5 minutes into the session everything except the mouse freezes on the screen. There is nothing that works. A hard reboot is done and the same thing happens after logging in. The system use to work fine up until a few weeks ago. I suspect it may be an yum update.
I just installed Narwhal alongside my Windows partition and whenever I enter a Windows 7 session following an ubuntu session my touchpad on my laptop is disabled and the taskbar has changed colors.
I had to change batteries on Rocketfish bluetooth mouse. The mouse re-installed fine, but when I use the mouse I have to double-click to make it work. How can I change it to work on one click?
I am using GNOME. I notice that KOrganizer takes about 30 seconds to start. Once launched it is fine though. Is there a method to speed up it's startup?
As a side note, what is your favorite calendar in GNU/Linux?
My Firefox used to start instantly, or at least near instant, but since yesterday it took about 30 sec to launch. Opening subsequent windows is near instant, but once all windows are closed it would take a long time to open again.
When I open it up in a terminal, it has absolutely no error message, clean start up and shutdown.
I turned up the CPU clock speed from 1.2GHz to 2.0GHz and it doesn't seem to help. Other programs starts fine too, so I kind of ruled out performance issue.
Yesterday I also tinkered with compiz settings and also installed the cairo dock and some media codecs. But I can't pinpoint when does it happen exactly, I also struggle to draw any relationship if there is any. And if it matters Firefox is 3.6.10 and Ubuntu is 10.04.
I am using qBitTorrent. But whenever i am trying to download, it is having few issues.
1. It takes a lot of time to start the download. Last night it did not even start to download even after 15 mins. But when i put the same torrent in utorrent in Win7 partition it started to download immediately.. can somebody point out what is going wrong?
2. do i need to keep the qBittorrent open all the time till it finishes.. Otherwise it is not downloading... But in my Win7, when i close it, it automatically docks itself to the task bar.. (hav been using Win for a long time.. thats why i am comparing it to Win.. )
I'm having trouble with Vim in any terminal emulator I use. I have a link (vi) to vim. Occasionally it will take very long to load, whether I use 'vi' or 'vi file'. Before, if I could I would restart X, and then it would load instantly again, but I waited this time and it did load, after a minute or so. Is this a problem with X or vim?
