Ubuntu :: Apt-get Update Failure
Apr 15, 2010
I've got this very strange problem in karmic. When I do "sudo apt-get update", the update process fails to download some repo files.
I'm pasting the whole output of the command here
Code:
If possible so that I can update my system. Due to this problem i'm not able to install libqt4-opengl which required for virtualbox.
Also, an off topic question, I can't autocomplete words in shell specifically after sudo apt-get and in some cases after sudo also. The autocompletion is working in all the other cases.
View 1 Replies
ADVERTISEMENT
Sep 19, 2010
Duriing an up date pc requested a restart to complete. Then it rebooted so far and has stopped.I have a disc that I installed Ubuntu with and vaguely remeber the operating system could be run from the disc. Can I put the disc in and start the pc from it and still read what I had on the Hard drive?Or is everything gone and lost?Prior to the calamity the pc was running Ubuntu 9.10 and nothing else.
View 6 Replies
View Related
Jan 18, 2010
The last two times that I updated I received a failure notification for gzip. I do not know what I did to cause that to happen;
I recently downloaded " hearts for gnome " which is a gzip file but i was not able to install it. Perhaps that jammed up the gzip!!
View 5 Replies
View Related
Dec 10, 2010
I grabbed an old laptop (a Dell Latitude D600) and installed Ubuntu 10.10 from the CD.Straight from the CD, it worked fine, including a reboot. I then ran an update, and now booting gives me the following message:
Code:
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word,
[code]....
View 5 Replies
View Related
Aug 3, 2011
having somewhat of an issue when it comes to updating through Update Manager.
I get "Failed to download repository information Check your Internet connection."
details :W:Failed to fetch http://ppa.launchpad.net/jonoomph/op...source/Sources 404 Not Found, W:Failed to fetch http://ppa.launchpad.net/jonoomph/op...-i386/Packages 404 Not Found, E:Some index files failed to download. They have been ignored, or old ones used instead.
Running 11.04, no major modifications.
I will try to be as helpful as possible.
also, I believe I have a few hard drive faults- I have reformatted several times, but I still have issues in the boot process.
View 2 Replies
View Related
Aug 23, 2011
Can't seem to update apt-get. Can anyone help with this? I've attached a screenshot of the output of
Code:
sudo apt-get update After trying this once, I decided to verify that there was an internet connection. I pinged some IP addresses and almost each ping went perfectly. If that can be ruled out, what is the next step?
View 1 Replies
View Related
Jul 1, 2010
cannot update fully because of apt authentication failure. what is this? what can I do to resolve it?
View 8 Replies
View Related
Mar 26, 2010
While running the update manager my system froze and all that I knew to do was power down and power up again. When I first started the update said 18.5 MB and on restart it said 17.x MB. I restarted the update manager and it failed with errors.
The last message says "E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover:" but no progress in 1/2 hour. If I try to copy the messages to the clipboard it says that cntl-c will abort the operation so I haven't done that. From the top of the "Details" there are about eight "Invalid archive signature" messages. I don't know how to proceed.
View 7 Replies
View Related
May 28, 2010
After performing the periodic update on 2010-05-26 including libc, libc6 and libgtk2.0 my system fails on boot with the following error message:
Code:
run-init: /sbin/init: no such file or directory
Kernel panic - not syncing: Attempted to kill init! If I boot from the 10.04 live CD, all partitions on the hard drive are visible, mountable, and pass all file system checks.
View 2 Replies
View Related
Sep 30, 2010
This morning my update manager came up so I clicked to update. About halfway through the update an error message popped up & said to restart my system. I restarted my system and now have a black screen with the following message:
mountall: symbol lookup error: mountall: undefined symbol: udev_monitor_filter_a
dd_match_subsystem_devtype
init: mountall main process (344) terminated with status 127
I read around earlier & tried to use a Ubuntu disk and reboot but I have the same error.
I'm using a Dell Inspiron computer, it's just over a year old. I keep up with all the updates but unfortunately cannot say for sure which updates were taking place because I just hit the update box.
View 1 Replies
View Related
Mar 25, 2011
After a kernel update ubuntu would not boot. So found this procedure using the live update cd. Update grub.cfg & delete everything down to but not including the first line that starts with 'menuentry' . Then boot works ok. A couple of weeks ago it started on my notebook. Is anyone @ hq listening & able to fix this problem permanently?
View 9 Replies
View Related
Jun 9, 2011
When I try to update my system(10.04 Lucid) it gives me this error message.
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_karmic_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 2 Replies
View Related
Dec 13, 2009
even from a terminal it wouldn't update? Maybe because I put my bootsector as ro ?
I don't know here is the message:
View 4 Replies
View Related
Mar 20, 2011
I just completed the latest updates to Fedora 14 - I have mono and wine on the system as well - so they were also updated. Now the only screen I can get is the failsafe (bash).
How do I recover my KDE desktop? (I noticed there were some updates for the KDE as well). I suspect something has failed during the update (selinux was also updated).
View 4 Replies
View Related
Mar 26, 2010
I created a separate /home partition after installing Karmic on a new computer using this HowTo :
[URL]
I copied all the files from /home/user using
find . -depth -print0 | sudo cpio --null --sparse -pvd /new/
On booting after the change, the new /home is correctly on a separate partition BUT during boot I get a message :
Could not update ICEauthority file /home/user/.ICEauthority
I checked and the ownership and permissions for /home/user/.ICEauthority are correct. The suggested remedy of deleting the file & waiting for it to be recreated doesn't work either. But when I compare other hidden files in the new /home/user directory, quite a few now have their ownership changed to root. & I am unable to connect to my external monitor because of a permission problem (probably connected).
View 3 Replies
View Related
Sep 12, 2010
I was updating the kernel and left the computer to let it do its business. There was power failure and I don't know if the update completed or if it was in the middle of it. Now if I start the computer, it freezes up at the login screen. I tried to recover from grub, by selecting "Ubuntu, with Linux 2.6.32-21-generic (recovery mode)". There were no prompts for input after this. The recovery screen is not updating anything after:
[2.348886] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[2.349015] EXT4-fs (sda1): write access will be enabled during recovery
[2.577641] EXT4-fs (sda1): recovery complete
[2.578072] EXT4-fs (sda1): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
When I come out of that screen (ctrl-alt-del), the problem repeats.
View 3 Replies
View Related
Mar 3, 2011
So I ran the update manager to install the latest kernel. It goes fine and was sitting at the restart prompt. I was playing minecraft and the entire system locked up - couldn't restart X or anything. Hard restart and I get a multitude of errors mostly dealing with not being able to find things in /dev/... It gives me a command line but I'm lost as to where to go from here to repair my system
View 2 Replies
View Related
Feb 28, 2010
After running a system update, on next boot I was unable to connect to the internet. I am running Fedora 12 KDE 4.4 x86_64 with a dsl connection. Network manager was keeping my ethernet card disabled. If I disabled NM control of the card I could manually enable it and connect to the internet, but on reboot it would be disabled again. I saw that the update did apply to NetworkManager so I did a downgrade. yum downgrade NetworkManager That seems to have fixed the problem.
Here's an interesting thing I noticed. When I did the downgrade, yum wanted to "Install" for dep NetworkManager-glib for the lower version, however didn't do anything to the same file on the latest version. Almost as if it wasn't installed. Now, with the downgraded version as current, yum wants to update both NetworkManager and NetworkManager-glib to the latest version. I couldn't swear to it, but I think the original update to NetworkManager did not include the *-glib dep, but now it does. Maybe that was the problem all along?
View 9 Replies
View Related
Aug 10, 2010
I was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
View 10 Replies
View Related
Apr 1, 2009
Just tried updating 5.2 to 5.3; using both pup and yum, and both get the same error:
Error: Missing Dependency: libgpod.so.0 is needed by package rhythmbox
If I remove rhythmbox (I don't use it on this machine) the upgrade works, but I thought I'd post in case someone wanted to take a look at it.
View 4 Replies
View Related
Jun 16, 2011
I upgraded the kernel of my machine with a yum update, and now it will not boot. I am running Fedora 14 on a 64 bit machine. I really really need it to boot. Help!
I did Ctrl+Alt+F2 and managed to log in. I have kernel x86_64 2.6.35.12-90.fc14 installed. How do I log in as usual? I never get to a login screen.
View 4 Replies
View Related
Mar 14, 2010
Dual Boot: Fedora 12 and XP Dell 505I've had trouble with the latest kernel update.I updated a bunch of packages recently (including Xorg and kernel), and noticed a severe flickering after the update on my center monitor (Samsung T260 - the laptop display did not exhibit the flickering behavior). I backed out all the changes and started updating package by package. After I updated the kernel (again) I rebooted and here's where the fun part is -
I no longer get anything, except the cursor. No grub menu, no grub prompt. I rebooted and ran the rescue disk and followed the procedurery and point grub at the right boot partition - see here. However (obviously or I wouldn't be posting) that failed to work. I still get a blinking cursor and dead system on boot up.
View 9 Replies
View Related
Sep 16, 2010
After migrating my dual-boot system (XP & Suse 10.3) to a new hard drive my system boots to XP OK but when it begins the linux boot process it gets stuck looking for the old drive, even though I have rewritten the fstab using the old "/dev/sda5" notation to identify the drive. An error comes up referring to the "/dev/by-id" name for the previous drive, not the new one. For some reason the devices are not rescanned as is evident from the contents of /etc/lvm/.cache and the listing under /dev/by-id. Is there some simple way to force a rescan during the boot process?
View 1 Replies
View Related
Oct 15, 2010
latest update to 11.3 a complete failure afterwards on reboot I'm instructed that I must first install kernel and to strike any key to exit which return me to grub menu. thats it for me and Osuse. 11.3 has been one bug after another and to much for me overcome. I will return once a day to see if anyone can fix this/
View 9 Replies
View Related
Jan 19, 2010
When trying to do an update or upgrade, I get the following:
Running Transaction Warning: RPMDB has been altered since the last yum transaction. Traceback (most recent call last):
[Code]....
I have tried yum clean all, yum clean metadata, rpm --rebuilddb, and even removing /var/cache/yum. yum info and yum list both work fine. Naturally, this yum problem is preventing me from updating my system.
View 8 Replies
View Related
Nov 4, 2010
Toshiba notebook is set up to triple boot win7, mepis 8.5 and os 11.3.Recent update of os11.3 left system with boot failure, "file not found".I booted mepis and used utility to reinstall grub, but no joy.
Appeared to install ok but on reboot, sda5 identified as 'mepis' not os11.3 and would not boot. Win7 & mepis boot ok.
Next, booted live Parted Magic and repaired as per another thread here, but again, no joy.NONE of the systems will boot.Rebooted mepis live cd and reinstalled grub again. Sda5 still identified as mepis and will not boot. Win7 & mepis boot ok.
View 3 Replies
View Related
Jul 13, 2009
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies
View Related
Feb 21, 2010
Last night i closed down the VB as 'save current state' but i think i might have been hasty with shutting down the Ubuntu machine at the same time.
This morning when i loaded up VB it came up with the following message:
View 5 Replies
View Related
Apr 16, 2010
- I have an 64-bit machine here w/ winXP installed
- It has no CD drive so my move will be installing via USB
- I downed the latest ubuntu image and made a USB bootable via UNebootin [forgive the spelling]
- Now, my usb boots up the alternate version of karmic ubuntu with all computers except this machine that i am using.
- When i boot my USB, it says "Boot error"
- Then thats it. i go back booting up windows.
View 1 Replies
View Related
Jul 12, 2010
I have tested it in windows and confirmed that the problem does not lay in the firewall and is just in ubuntu.
Simply what happens is I can connect, or rather network manager tells me im connected. If I leave it for approx 30 seconds it will fail.
If I open terminal services client it will allow me to connect to the server and even get passed the login screen but will just simply fail and the TSC program will crash.
below are a list of forums and fixes I have attempted. I am beginning to think that the open VPN program supplied with ubuntu is completely inadiquate (based on the number of other people with problems) and I cannot see why ubuntu comes shipped with it on CD when it clearly undermines the good work they have done to produce the rest of the OS.
[URL]
Anyway, I have tried using MPPE, refuse-eap = yes
I have tried changing EVERY single option available in the VPN properties and restarting the network after each one.
As an alternative are there any other network managers available for ubuntu 10 that anyone can recommend to avoid using the standard one?
View 1 Replies
View Related
