Can't seem to update apt-get. Can anyone help with this? I've attached a screenshot of the output of
Code:
sudo apt-get update After trying this once, I decided to verify that there was an internet connection. I pinged some IP addresses and almost each ping went perfectly. If that can be ruled out, what is the next step?
I grabbed an old laptop (a Dell Latitude D600) and installed Ubuntu 10.10 from the CD.Straight from the CD, it worked fine, including a reboot. I then ran an update, and now booting gives me the following message:
Code:
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word,
[code]....
having somewhat of an issue when it comes to updating through Update Manager.
I get "Failed to download repository information Check your Internet connection."
details :W:Failed to fetch http://ppa.launchpad.net/jonoomph/op...source/Sources 404 Not Found, W:Failed to fetch http://ppa.launchpad.net/jonoomph/op...-i386/Packages 404 Not Found, E:Some index files failed to download. They have been ignored, or old ones used instead.
Running 11.04, no major modifications.
I will try to be as helpful as possible.
also, I believe I have a few hard drive faults- I have reformatted several times, but I still have issues in the boot process.
I am not able to install any package through sudo apt-get install <package name> and when I run sudo apt-get update , I am getting the below output .
onadmin@ubuntu:~$ sudo apt-get update
Err http://us.archive.ubuntu.com maverick Release.gpg
Something wicked happened resolving 'us.archive.ubuntu.com:http' (-5 - No address associated with hostname)
Err http://us.archive.ubuntu.com/ubuntu/ maverick/main Translation-en
[Code]...
I just completed the latest updates to Fedora 14 - I have mono and wine on the system as well - so they were also updated. Now the only screen I can get is the failsafe (bash).
How do I recover my KDE desktop? (I noticed there were some updates for the KDE as well). I suspect something has failed during the update (selinux was also updated).
While running the update manager my system froze and all that I knew to do was power down and power up again. When I first started the update said 18.5 MB and on restart it said 17.x MB. I restarted the update manager and it failed with errors.
The last message says "E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover:" but no progress in 1/2 hour. If I try to copy the messages to the clipboard it says that cntl-c will abort the operation so I haven't done that. From the top of the "Details" there are about eight "Invalid archive signature" messages. I don't know how to proceed.
After performing the periodic update on 2010-05-26 including libc, libc6 and libgtk2.0 my system fails on boot with the following error message:
Code:
run-init: /sbin/init: no such file or directory
Kernel panic - not syncing: Attempted to kill init! If I boot from the 10.04 live CD, all partitions on the hard drive are visible, mountable, and pass all file system checks.
This morning my update manager came up so I clicked to update. About halfway through the update an error message popped up & said to restart my system. I restarted my system and now have a black screen with the following message:
mountall: symbol lookup error: mountall: undefined symbol: udev_monitor_filter_a
dd_match_subsystem_devtype
init: mountall main process (344) terminated with status 127
I read around earlier & tried to use a Ubuntu disk and reboot but I have the same error.
I'm using a Dell Inspiron computer, it's just over a year old. I keep up with all the updates but unfortunately cannot say for sure which updates were taking place because I just hit the update box.
After a kernel update ubuntu would not boot. So found this procedure using the live update cd. Update grub.cfg & delete everything down to but not including the first line that starts with 'menuentry' . Then boot works ok. A couple of weeks ago it started on my notebook. Is anyone @ hq listening & able to fix this problem permanently?
View 9 Replies View RelatedWhen I try to update my system(10.04 Lucid) it gives me this error message.
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_karmic_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
On a Xp host I installed last version of VirtualBox and I created a 9.10 Ubuntu 'guest'.While I can surf the net, I cant 'sudo apt-get update' nor do a 'reload' from 'Synaptic Package Manager'.
PS Here are some facts:
<<
Host:
PC:
Thinkcenter 9640-7BG
Network adapters:
[Code]...
I was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
I created a separate /home partition after installing Karmic on a new computer using this HowTo :
[URL]
I copied all the files from /home/user using
find . -depth -print0 | sudo cpio --null --sparse -pvd /new/
On booting after the change, the new /home is correctly on a separate partition BUT during boot I get a message :
Could not update ICEauthority file /home/user/.ICEauthority
I checked and the ownership and permissions for /home/user/.ICEauthority are correct. The suggested remedy of deleting the file & waiting for it to be recreated doesn't work either. But when I compare other hidden files in the new /home/user directory, quite a few now have their ownership changed to root. & I am unable to connect to my external monitor because of a permission problem (probably connected).
I was updating the kernel and left the computer to let it do its business. There was power failure and I don't know if the update completed or if it was in the middle of it. Now if I start the computer, it freezes up at the login screen. I tried to recover from grub, by selecting "Ubuntu, with Linux 2.6.32-21-generic (recovery mode)". There were no prompts for input after this. The recovery screen is not updating anything after:
[2.348886] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[2.349015] EXT4-fs (sda1): write access will be enabled during recovery
[2.577641] EXT4-fs (sda1): recovery complete
[2.578072] EXT4-fs (sda1): mounted filesystem with ordered data mode
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
When I come out of that screen (ctrl-alt-del), the problem repeats.
I'm having a problem with this command: sudo yum update
I get the error: "Loaded plugins: presto refresh - packagekit
error:no such table: packages.
I created a group using vi /etc/sudoers
saved it using :wq!
but can't get it to work.
Previously on 10.10 "sudo update-grub" took 2-3 seconds.
I upgraded to 11.04 and it now takes 10 - 15 minutes.
Is unity generally much slower than GNOME?
Error messege: sudo dpkg configure a' to correct the problem. I used synaptic package manager to install WIne....It stalls on"ttf-mscorefonts-installer (3.0". So, I try update manager and it asked me to restart computer which I do. When I try to re-run synaptic manager I get the above error.
View 2 Replies View RelatedI am from India, and I tried to update my Ubuntu system today. Code: $sudo apt-get update The update failed because the connection to the India mirror timed out: Code: [URL] Could not connect to in.archive.ubuntu.com:80 (111.91.91.37). - connect (110: Connection timed out) I tried the update a few times, with the same result every time.
I had firestarter running at this time, and noticed that I would get new security events every time I tried an update. I checked the events list, and it turned out that the machine at the ip address 111.91.91.37 (the in.archive.ubuntu.com machine, to go by the above error message) had been trying to make connections to seemingly random ports on the machine every time I tried the update: see the attached screenshot. I then changed my repositories to the Main Server using Synaptic, and tried the update again (from the command-line). This time it worked without a hitch, and firestarter did not report any unwanted incoming connection. why is the India mirror trying to open connections that the Main server apparently does not need in order for me to do the update? Should I (we) be concerned?
Just got a sudo update from the update manager-does anyone know what this specific update does?
View 4 Replies View RelatedMy current situation is I have two physical hard disks, one with Windows 7 (sda) and another where I recently installed Ubuntu 9.1 (sdb). At this time there were no issues.
Now after getting used to 9.1 I selected to upgrade to 10.04 from the update manager. During this install I was told I needed to upgrade GRUB which I understand is the bootloader and was told to choose where to install it.Now at this time I had no knowledge of drive naming conventions in Linux and there was no option to cancel the upgrade to look for help, so instead I followed the advice in the help box to simply select every device listed
The result was a fully working Ubuntu installation but at the cost of an unbootable Windows 7.Windows is showing on the GRUB menu but selecting it gives only a blank screen with a flashing cursor and no ability to do anything besides ctrl-alt-delete.
After a few hours of googling solutions including downgrading GRUB, there was no change and it seems that I actually have a version of GRUB on both drives. The one on the windows drive (sda) is the default loaded GRUB that shows Windows 7 but cannot boot it. The second GRUB install on the Ubuntu drive (sdb) is the one I am able to configure through Ubuntu but does not list Windows 7 on its boot list even after using "sudo update-grub"
I basically needed to run "sudo apt-get install subversion" but I was told that I need to update my "apt-get".So when I try "sudo apt-get update". I got the following errors:
Ign http://us.archive.ubuntu.com intrepid Release.gpg
Ign http://us.archive.ubuntu.com intrepid/main Translation-en_US
Ign http://us.archive.ubuntu.com intrepid/restricted Translation-en_US
[code]....
I've got this very strange problem in karmic. When I do "sudo apt-get update", the update process fails to download some repo files.
I'm pasting the whole output of the command here
Code:
If possible so that I can update my system. Due to this problem i'm not able to install libqt4-opengl which required for virtualbox.
Also, an off topic question, I can't autocomplete words in shell specifically after sudo apt-get and in some cases after sudo also. The autocompletion is working in all the other cases.
I am having issues with Update Manager after cancelling an Update.The Update Manager shows a number of required updates, but when I click on Install Updates... Nothing happensWhen I launch sudo dpkg --configure -a in a terminal I receive the following message:dpkg: status database area is locked by another process.On another forum i saw something regarding a gksu.lock file that needed to be deleted... but I can't find any such file....If I try to launch update manager via a terminal: sudo update-manager I get the following error:
requiredDownload could not be calculated: E:Unable to parse package file /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_karmic-updates_main_binary-amd64_Packages (2), E:Unable to parse package file /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_karmic-updates_main_binary-amd64_Packages (1), E:Unable to parse package file /var/lib/apt/lists
[Code]....
I tried to execute sudo apt-get update in the terminal today, and I got the following output:
Code:
joseph@ubuntu:~$ sudo apt-get update
[sudo] password for joseph:
Get:1 http://dl.google.com stable Release.gpg [189B]
Hit http://us.archive.ubuntu.com karmic Release.gpg
Ign http://us.archive.ubuntu.com karmic/main Translation-en_US
[Code]...
Duriing an up date pc requested a restart to complete. Then it rebooted so far and has stopped.I have a disc that I installed Ubuntu with and vaguely remeber the operating system could be run from the disc. Can I put the disc in and start the pc from it and still read what I had on the Hard drive?Or is everything gone and lost?Prior to the calamity the pc was running Ubuntu 9.10 and nothing else.
View 6 Replies View RelatedThe last two times that I updated I received a failure notification for gzip. I do not know what I did to cause that to happen;
I recently downloaded " hearts for gnome " which is a gzip file but i was not able to install it. Perhaps that jammed up the gzip!!
I'm getting an error when typing in
Code:
sudo apt-get update
I receive:
Code:
E: Could not get lock /var/lib/apt/lists/lock - open (11: Resource temporarily unavailable)
E: Unable to lock directory /var/lib/apt/lists/
I'm running Umbuntu 10.10 and am quite new to all this
I wanted to installed transmission on my buntu server box 10.10 tonite so from my laptop top i ssh'd into it...which took an unordinary amount of time.. went to type in sudo apt-get install transmission half way through each word at the terminal prompt it would just hang...had to wait then it would recognize my typing and i could continue....pressed enter waited a long time; then noticed i coulnd't connect to the repos?
So i manually (as in sitting at the box not over ssh) tried to ping google nothing....sudo apt-get update....nothing....
- i restarted the machine twice
-sudo ifdown eth0 /sudo ifup eth0
sudo nano /etc/networking/interfaces made sure it said
Quote:
I have my router saved to assign 192.168.0.100 to the machines eth0 MAC of 00:14:2a:e9:15:0b so i can always use my webUI w/o having to guess my ip ifconfig shows my broadcast running i dunno i'm sooo confused and lost scared...a lil' cold....kinda hungry..pretty tired....
I'm on cli no gui anyone ever have this?
Quote:
I can't check any update and can press button install Updates. I have this warning message. If I use terminal for update, I have this error (sudo apt-get update):
GPG error: [URL] natty Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 638ABCA0FA3A1271
Today I installed suse 11.1 on my computer. After some time i was able to connect to the internet and the auto update program prompted for updates. after the updates were installed more updates were prompted. but now i get an error when i try to install them. edit: the error is "PackageKit Error internal-error: Installation aborted by user " if i try it manually i get an message "access denied to ......" how can i make my system update normal?
View 8 Replies View Related
