My computer froze and I had to do a hard reboot and now when I try to boot into Ubuntu the grub menu comes up and I choose my kernel but then I just get a blinking cursor. I can't even get into recovery mode!
View 2 RepliesI'm currently running it as a dual-boot together with Windows 7. I hadn't had any problems up till yesterday, when all of a sudden Ubuntu stopped responding (I wasn't doing anything special, running firefox and mathematica) while opening a new tab (.....). I waited for a few minutes, still no response, and then hard booted it. When starting it up again, all my panels had disappeared.. The pictograms on my desktop are also moving up and down about a pixel continuously about once a second. I'm still able to run a terminal using shortcuts, and thus launch any program, but I have no idea how to recover the panels, and am still wondering how to prevent them from disappearing. I can make a screenshot on request, but there is really nothing to see except for a few pictograms. I am also using two monitors and 10.10 if that is of any importance.
View 1 Replies View RelatedAfter the last update this morning, which involved, among other things, the updated version of the linux kernel, upon rebooting, the computer froze at the fedora logo.
View 14 Replies View RelatedI tried to install 11.3 on my acer aspire 7530 notebook to have dual boot with xp.
I made 4 partitions: one for xp, and the three for linux were made automatically.Before installation I got the warning that the partition wasn't entirely below 128 gb, I installed anyway to give it a try.
The installation froze at 92% and after the laptop wouldn't boot.
Now I've formatted the hard disk and installed windows on a partition leaving a free un formatted partition of 100 gb.
My system just froze while I was browsing, never had it happen before so I was quite shocked, anyway just restarted it and now it wont boot. Got all my school work on there so now Im stressing.
This is what comes up:
Gave up waiting for root devices. Common problems:
What can I do to recover this as I was stupid enough not to back up my school work?
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies View RelatedI followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
i have downgraded from Ubuntu 10.10 to Ubuntu 10.04. I've had some bumps along the way and finally was able to install 10.04 successfully. Right now, my computer will not boot from the HDD and will only boot from the USB drive that the LiveCD is on. When I reorganize to set HDD as primary boot, i get:id-laptop login:d-laptop password:and I can put that in but then it just gives me a command line that ends with ~$ i believe. How do I get it to boot from the HDD instead of from the USB without running into this problem?
If I resequence the boot to HDD as number two, it will juts go into the LiveCD mode. Am I supposed to reinstall 10.04 again? I know 10.04 was successfully installed because it said it was and it needed to restart so i hit the restart button. It also had my old desktop picture there and all my files AND i checked the system info before restarting (it confirmed that lucid lynx was running).
I have (had) a dual boot computer;Win XP and Ubuntu 10.10 64 bit.I decided it was necessary to enlarge my Root and Home Partitions. Using the instructions http://ubuntuforums.org/showthread.p...ome+Partitions I successfully enlarged the partitions and restored 10.10 (I used the copy command suggested by Irony). However when I boot the computer it boots to Ubuntu but no longer gives me the option of going into XP(it is not listed in Grub menu). Is there a fairly straightforward way of getting XP back on the Grub menu so I can boot to XP again?
View 5 Replies View RelatedI am working on the newest version of Ubuntu Linux on VirtualBox under a 64-bit Windows 7 host. When I was working, VirtualBox froze, and I hadn't saved my work in Ubuntu. What should I do?
(This happened after I installed the extension pack for USB 2.0 and I went ahead and tried to access a USB port. I suspect that this led to my current situation.)
I started the upgrade last night, and around 12:03 it locked up the system and became unresponsive. I could move the mouse around the screen, but nothing was able to be interacted with, and the keyboard commands I could think of were not working. The upgrade manager said 10 minutes were left and it was in the process of updating the boinc-client (not a compiled version the one listed in the package manager). I left it until about 4:30 this morning and tried to reboot since I couldn't seem to accomplish anything else. The system came up stating it could mount root and just about everything else. So I burned a CD with 11.04 and booted off the CD and am now using the "Try Ubuntu" mode. I checked the file system and the folders I would expect to be there were.
View 5 Replies View RelatedI tried to download Mp3 plugin but it froze. So i restarted and it was still frozen. Then I uninstalled it and reinstalled Rhythm box, hoping that I could downloading Mp3 plugin. But now the problem is that it doesn't Ubuntu in stores section. What can I do?
View 2 Replies View RelatedMachine is a Dell Optiplex GX260, Pentium 4 with ATI Radeon RV200 QW [Radeon 7500]. I believe this is an AGP graphics card. I also believe that the graphics card is the root of my problem. In Karmic, I could get the computer to suspend. but it would not resume. The monitor would not initiate and it seemed as though the system froze. Only way out was a hard reboot. Hibernate worked for me without any problems, so it was no deal breaker. Now in Meerkat, Suspend behaves exactly as before. However, I can not get the system to go into hibernation.
The monitor goes down, but the system seems to freeze and never go down. I have tried editing the options in the acpi-support file to no avail. I have tried disabling compiz (which works amazingly well with this card), to no avail. I am using the open-source drivers and I have not tried the closed-source drivers in this system. I tried the closed-source drivers in Karmic and they made no difference. I may try un-installing the ATI card and fall back on the on-board Intel chipset to see if that solves the problem. Only then, I will loose 3d effects, etc.
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies View RelatedI'm re-posting here since I've gotten no response in the Installation & Upgrades Forum.
While running the Update Manager my system froze and all that I knew to do was power down and power up again. I restarted the Update Manager and still have errors.
The original thread is at: [url]
This is not a crisis. I can re-boot and run without apparent errors. I thought about apt-get -f install but I don't understand enough. Is this a broken dependency problem? If this is a dependency problem will this (apt-get -f install) just clean-up the loose ends and then will the Update Manager pick up the pieces the next time I go through "check"? Is there possible harm doing this?
This system is at 9.10 and was up-to-date until I had this problem yesterday.
My recent setup was 32-bits Ubuntu 9.10 with / on a 20 gb partition and /home on a different partition on the same physical hard drive. Two days ago the system suddenly froze while idle. I rebooted and got the error message at start up that the system was unable to mount every unit that was listed in fstab. I troubleshooted by using a Live CD but could not find any reason to why i could not find the home partition. It lists in gparted but not in terminal using df.
I've made another install on a different physical hard drive and don't care about the previous installs, but I would like to get the data out of the home partition. If anybody have any idea what to try to access it
i can click on place and system and anything else but when i try to open application by just clicking on it i get froze for a minute and i can not open it i got ubuntu 10.4
View 1 Replies View RelatedMy system froze when watching a flash video and I had to do a hard reset. Now when I boot into ubuntu I can't open the software centre or the update manager. Is there a way to check what's wrong or a way to reinstall everything from terminal? Synpatic still opens and works.
View 1 Replies View RelatedI have been having some major issues with the update manager of ubuntu 9.10. I have had 3 instances so far where the updater froze either in the middle of updating or right after, and every time resulted in a corrupted file system. Two times it has happened to me which resulted in once having to completely reinstall and another was luckily saved by using Gparted on the live CD. But now my friend who i installed Ubuntu for has had the same problem. When it happened to me, I was forced to hold the power button to get the computer to turn off as it completely locked up the system. My friend however, was able to use the shutdown menu.
View 2 Replies View RelatedI have a netbook, on which I installed the netbook remix. It had ran fine until one day, I shut it down while it was updating. Now, on bootup, it will take me to the login screen and then basically freezes. The keyboard and mouse do not work and I cannot login to any profile. I tried a clean reinstall, but it only finds the preferences I have and sends me right back to the login screen.
View 1 Replies View RelatedThe Ubuntu installer think my /boot partition is (hd0,0). This is what it writes into grub menu.lst. My computer won't boot after install completes. The Ubuntu live CD shows this boot partition is (hd4,0) (sde1). But that doesn't work and after editing grub menu.lst to (hd4,0), the computer still won't boot. Some searching at the grub command line show the correct value is actually (hd1,0).
View 8 Replies View RelatedI currently do not have Wine. I have uninstalled it and plan to reinstall. The last time I had it on Fedora was like 2 days ago. I had a problem that was really irking me. I was playing Myth War 2 (which worked flawlessly on Ubuntu 10.10) and right after I started, I went to move my character in the game and I just froze. Wine would not do anything, so I force quit, restart and the same thing keeps happening over and over. I do not know what is going on. I have been told it is my graphics driver, but it is current and up to date.
View 7 Replies View RelatedI was looking for a command to log off the user who froze the screen. I logged in as a new user but I got some errors now all I see is the color screen, how can I log the new user off (the GUI)? I did the above command but nothing came in return?
View 8 Replies View RelatedKubuntu 10.10 froze on me randomly. I shrugged it and rebooted. Then less than an hour later, another freeze. This was rare, so I started up Memtest86+ and let it go.
The results... were not encouraging.
Stock voltage on both. Never overclocked.
After pass 0 complete, swapped around various tests and ranges to check.
At pass 38, switched from full-range to test #5 2048M-3327M.
After pass 80, switched to various tests. No tests other than #5 generated errors.
So now my question is multipart...
One, is there anything that can be adjusted within linux itself to avoid triggering these errors (need to keep using this RAM for at least another week before I can afford to RMA it)?
Two, I'm assuming this does indeed point to RAM malfunction/damage, but if I'm wrong, what is going on here?
Three, if there is a way to adjust for these errors, should I still be RMAing it? If I do, I'm going to attempt to get some the same size/speed of ECC RAM. When I ordered originally, I wasn't aware the motherboard I'd picked supported ECC. Now I am.
Seems I'm not able to RMA this RAM at present, working with the company I got it from, but that option's just about out. Now, I read something about a kernel module called badram, but I'm finding little detail on how to go about activating it properly. Seems like if I can disable the one chip these errors are all occurring via, that would solve the issue just fine.
Some of your private key files are encrypted for security reasons. In order to read them you have to provide us with the pass phrases. Server your.server.com:55 (RSA)
Enter pass phrase:
Server www.blahblahblah.com:55(RSA)
Enter pass phrase:
How to login ?
The cursor is blinking but I am unable to enter the pass phrase; the only thing I can do is press the power button to shutdown. Even if I leave the PC running for a hour I can't type anything.
I know how to resolve the problem if I am able to login.
I was logged in, but had not used the computer for about 48 hours. When I 'woke' the system, I could see that Thunderbird and Firefox were active, just as I had left them. I moved the mouse, the screen went black and the mouse pointer was visible (and could move). The system stayed like this for about 2 minutes, then wend down completely. I cut power, booted and got the login screen. Each time I put in my password, it looks as if it is loading but then just goes right back to the login screen. I have no problem logging in as root.
View 9 Replies View RelatedAny time i try to open skype it closes out fully in 5 seconds (not even in the processes anymore). I don't know why or how OR how to make it stop being so mean to me! i'm running ubuntu 10.4 32bit . I tried to boot it in safe mode and umm.. it froze? or crashed? well it was on the black screen with the blinking dot for like 20 mins before i gave up on it (Hiting enter or esc or anything didn't work). There was a key symbol on my panel before skype acted up(It closed and disabled something.. i've never seen it before). Adobe also crashed, and linux did a small update (nothing with skype).
View 14 Replies View Related