The Ubuntu installer think my /boot partition is (hd0,0). This is what it writes into grub menu.lst. My computer won't boot after install completes. The Ubuntu live CD shows this boot partition is (hd4,0) (sde1). But that doesn't work and after editing grub menu.lst to (hd4,0), the computer still won't boot. Some searching at the grub command line show the correct value is actually (hd1,0).
View 8 Replies
i have downgraded from Ubuntu 10.10 to Ubuntu 10.04. I've had some bumps along the way and finally was able to install 10.04 successfully. Right now, my computer will not boot from the HDD and will only boot from the USB drive that the LiveCD is on. When I reorganize to set HDD as primary boot, i get:id-laptop login:d-laptop password:and I can put that in but then it just gives me a command line that ends with ~$ i believe. How do I get it to boot from the HDD instead of from the USB without running into this problem?
If I resequence the boot to HDD as number two, it will juts go into the LiveCD mode. Am I supposed to reinstall 10.04 again? I know 10.04 was successfully installed because it said it was and it needed to restart so i hit the restart button. It also had my old desktop picture there and all my files AND i checked the system info before restarting (it confirmed that lucid lynx was running).
How do I get a computer to boot from a USB flash drive with a bootable image when the computers bios does not have a USB device as a boot choice ?
View 1 Replies View RelatedI had put a second Sata hard drive in my computer and was pleasantly surprised not to run into any problems. No BIOS changes, just start the partitioner, partition, mount, it worked.And then... my computer didn't boot today.I disconnected the new hard drive and it went a little bit further, allowing me to log in as root and remove some lines in /etc/fstab. After that, it booted without any issues.I then remembered that the new drive was /dev/sda and the old drive /dev/sdb. I assume this is the reason for not booting, there is no GRUB on /dev/sda. How do I fix this? Can I simply plug in the cable for the new drive where the cable for the old drive was?
View 4 Replies View RelatedI have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies View RelatedI have a Western Digital 1Tb WD10EAVS Caviar Gp Hard Drive. It does not have an operating system installed but it have alot of my important files. The hard drive began making a clicking sound and when I boot up my computer I see my other drives and the sata slot for that drive remains blank. Can any one help me recover or fix my hard drive
View 1 Replies View RelatedI've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies View RelatedI followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies View RelatedI have (had) a dual boot computer;Win XP and Ubuntu 10.10 64 bit.I decided it was necessary to enlarge my Root and Home Partitions. Using the instructions http://ubuntuforums.org/showthread.p...ome+Partitions I successfully enlarged the partitions and restored 10.10 (I used the copy command suggested by Irony). However when I boot the computer it boots to Ubuntu but no longer gives me the option of going into XP(it is not listed in Grub menu). Is there a fairly straightforward way of getting XP back on the Grub menu so I can boot to XP again?
View 5 Replies View RelatedDual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies View RelatedI'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
I have a Dell laptop with Windows XP installed, and for various reasons (Help: I borked my WindowsXP boot when installing OpenSUSE 11.3) I can not install a GRUB boot loader to the first hard drive (hd0).
I currently have a second hard drive in this laptop with a perfectly working OpenSUSE 11.3 instance, but no way to boot into it. I remember back in ancient times, a common option with Linux distros was to create a boot floppy to boot into Linux rather than installing GRUB or LILO to MBR. Since this laptop doesn't have a floppy drive I'd like to do the same thing with a USB stick. Is there any way to install GRUB (or something similar) to a USB stick? What I am not asking here is whether I can put a full, bootable Linux instance on a USB drive - I only want a boot loader on USB that launches to the appropriate mount point on (hd1).
Old Boot drive in new PC (XPPRO + Ubutnu) Run the XP repair BUT still have Error 21, used XP repair console to repair MBR still have problems.
View 1 Replies View RelatedI downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies View Relatedwe have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
I have a USB drive on which I want to install Arch Linux (using the installer, not unetbootin or something similar, as I want the drive to be persistent.) The computer from which I want to boot this USB supports booting from a USB floppy, not a normal drive. Is there any way for me to make a USB floppy on another drive and use that to boot the normal USB drive?
View 2 Replies View RelatedBack in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
I wanted to use a USB drive to boot slackware because I do not have a blank CD or DVD. So I went to [URL] first, but I couldn't get dd and syslinux to install on windows 7. So then I brought out my trusty puppy linux USB stick, and copied the file onto puppy. Then I typed in dd if=/(desktop directory)/usbboot.img of=dev/sdd1 bs=512 but when I booted my computer up with the usb stick I get the message "boot error"
View 3 Replies View RelatedI have an old computer (with floppy drive ) which does not support booting from USB drive.
However, it can boot from CD drive.
I have already created a USB disk with Fedora 10 which I use merrily in my another computer.
But how do I use it in the old computer?
Is there any way to initially boot via CD and then transfer control to USB Fedora?
Basicly I turned off. I turn back on and the Plymouth Graphical Splash just sits there when the "F" apears... I managed to get a text login by doing ALT+Control+F2 and managed to get on IRC and I got some help (I still can't boot normaly) but thanks to the solution by nirik which was to get a text-login and to run startx, that works, however it doesn't fix the problem of me not being able to boot normaly, If I add nomodeset to the KMS I get:[URL] strangly enough the reason why I reset is because the Internet wasn't working. This error seems to mention eth0 quite a bit..
---------- Post added at 03:18 AM CST ---------- Previous post was Yesterday at 09:31 PM CST ----------BUMP. Come on this is stoping games from working, ETC---------- Post added at 03:31 AM CST ---------- Previous post was at 03:18 AM CST ----------I relise I haven't posted much info..
I can't boot F14 on my computer because of a bug in the intel AGP driver.
[URL]
This is still a bug in the latest kernel
[URL]
but looks like it's fixed in 2.6.35-7.12
When will this kernel be release?
Is there any way to bypass this driver during boot up so I can install F14?
my hard drive originally had XP on it, then I installed ubuntu from a disc. I gave Xp 65 of the 200 gbs.I mainly use ubuntu, but sometime will use the xp. my power supply died, so I moved the HD from my old Hp to a much newer gateway. all is well except if i try to boot xp, it say "starting up", but never does.
View 1 Replies View RelatedAlright, so one day I was on Windows 7 and I install some hardware called "Flux" and then I get IRQL NOT LESS OR EQUAL bluescreened.. GAY. Luckily I had dual-booted with Ubuntu 10.10 ^__^.. So one day I was on Ubuntu and I was thinking of doing a system recovery for Windows 7. As I was backing up my files something went wrong I guess and then I went to my disk utility thing. I then found my main hard drive and decided to mess around with it(Because I'm Stupid) Now I accidently unmounted it or something. Then my Computer shuts down and comes back up saying "No Bootable Devices"... I then went on to run hp tests and found out my computer knows the HDD is there but its not detecting it as a bootable device UGH. So how would you suggest I fix this? I was thinking of putting bootfiles on a blank dvd and making ubuntu boot from my dvdrom. But what would happen to my old files? I really want to keep my old files. -__- Do you guys know how I can fix this?
View 2 Replies View RelatedI installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I have transferred FC10-liveCD on to 1GB USB using liveusb-creator.
But the computer cannot start up with this one, die after leaving following message:
Cannot find linux kernel image boot:
I don't know what's wrong. I got the same error message when I transfered boot.img onto USB.
