Ubuntu :: While Running The Update Manager System Froze
Mar 27, 2010
I'm re-posting here since I've gotten no response in the Installation & Upgrades Forum.
While running the Update Manager my system froze and all that I knew to do was power down and power up again. I restarted the Update Manager and still have errors.
The original thread is at: [url]
This is not a crisis. I can re-boot and run without apparent errors. I thought about apt-get -f install but I don't understand enough. Is this a broken dependency problem? If this is a dependency problem will this (apt-get -f install) just clean-up the loose ends and then will the Update Manager pick up the pieces the next time I go through "check"? Is there possible harm doing this?
This system is at 9.10 and was up-to-date until I had this problem yesterday.
I have been having some major issues with the update manager of ubuntu 9.10. I have had 3 instances so far where the updater froze either in the middle of updating or right after, and every time resulted in a corrupted file system. Two times it has happened to me which resulted in once having to completely reinstall and another was luckily saved by using Gparted on the live CD. But now my friend who i installed Ubuntu for has had the same problem. When it happened to me, I was forced to hold the power button to get the computer to turn off as it completely locked up the system. My friend however, was able to use the shutdown menu.
I upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found , W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
Installed from the 9.1 iso got everything set up all tickety boo. using it as a local development server. have been ignoring the update manager, but today for some reason I thought ok, do your thing fatal on restarting it gets as far as the splash screen then dies " * could not access PID file for nmbd" hit esc to get the grub thing up and tried recovery mode same deal so stuck really.
I can hit 'e' and get a basic emacs thing wit a few lines of commands, but not sure what to do there!
I'm not a big terminal user. I can do stuff I need to and leave it at that. Do I have to flatten this machine and re-install anything. Loathe to do that as I spent quite a while getting all the webby bits installed and working as I want to, adn don't really want to have to set all that up again.
While running the update manager my system froze and all that I knew to do was power down and power up again. When I first started the update said 18.5 MB and on restart it said 17.x MB. I restarted the update manager and it failed with errors.
The last message says "E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover:" but no progress in 1/2 hour. If I try to copy the messages to the clipboard it says that cntl-c will abort the operation so I haven't done that. From the top of the "Details" there are about eight "Invalid archive signature" messages. I don't know how to proceed.
I was running the Update Manager when my system froze due to the failure of Karmic to support motherboards using the Intel 845 chipset.
Although the update did not complete when I rebooted and invoked Update Manager it reported that the system was up to date. How do I reset the system so that I can install the updates?
I'm a little bit stuck and in need of advice from people who know what they're talking about. I've had Ubuntu on my office PC, home PC and laptop for about a year now and never had a problem that I couldn't solve, until now. I'd not turned my laptop (Lenovo N 500 with Ubuntu 9.10 64 Bit using GRUB2) on for about a month so when I did on Monday of this week I noticed that I'd not updated Ubuntu for 27 days, so ran the update manager. After everything was updated I carried on using it as normal but when I tried to turn it on yesterday I get the following issue...
GRUB loads and gives me all the possible boot options. Whatever one I choose, I get the same results. It starts to boot (I see the black screen with the white Ubuntu logo) but this remains on the screen for a very long time, then it goes to a flashing cursor at the top left of the screen and it just sits there indefinitely.
I've tried playing with Super GRUB Disc but admittedly I'm not too sure what I'm doing with it. I've tried using the Ubuntu Installation disc as a Live CD too but with no joy. The main HDD appears fine when in Live CD mode, all my files are there etc.. Is this actually a GRUB issue or something else? It's like GRUB's doing its bit and then it's failing slightly further down the line.
I'm totally out of my depth here and really don't want to have to reinstall everything, I'm sure there's a simply solution.
cc -pipe -Wall -DOPENSSL -O2 -g3 -ggdb -c -o md5.o md5.c md5.c:20:25: error: openssl/md5.h: No such file or directory md5.c: In function md5_mac: md5.c:28: error: MD5_CTX undeclared (first use in this function) md5.c:28: error: (Each undeclared identifier is reported only once md5.c:28: error: for each function it appears in.)
[Code].....
Running Ubuntu 9.10 (i386) with latest patches from update manager. If I try using the 4.2 archive I get the same result.
I have similar problems with aircrack-ng suite, but I'll leave that until later!
Last week I upgraded my Ubuntu 8.04 to a 8.10. While my ever so loyal machine was performing this business, I started my diner, once in a while having a quick look at how things were going. And they were going fine. The last thing I noticed on the screen was that upgrading was at about 3 minutes from finishing, and when I got back to my PC I was confronted with a black screen. Later on I found out that the reason for the crash was a malfunctioning USB-hub in which my mouse was located.
Anyway, I couldn't get my Ubuntu running, the only thing I got to do was reach the log-in screen, enter my username and password, after which the screen froze. Typing CTRL+ALT+F1 gave me a terminal window, but I had no clue what to go looking for or where/how I could find it.
In the mean time I re-partitioned the HD (75GB), placed the old Ubuntu on a 30GB partition and gave the other 45GB to a new partition on which I re-installed my Ubuntu 8.04. Working from that partition I was able to find out that the old version had indeed upgraded to 8.10 but was missing the <gnome-power-manager> file.
My question now: If I can in any way restore that missing file or point me out some kind of tutorial where I can learn how to do it?
Untill now I have been looking through about a few hundred tutorials, but most of them are written by people who know the terminal inside-out, and frankly are not really easily understandable for newbies.
The fact is: in that old version I have many maps and files which I would like to save (yes, you are completely right: I should have saved them in the first place!) but some of them are for some reason write-protected and I do not know how to get root-priviliges to un-lock them.
I originally tried Ubuntu 9.10 via a windows installation through Wubi. I had a VERY complex problem with a "Kernal Panic" due to an update through update manager and my system would not run proficiently. I wanted to know if that bug was exclusive to Wubi installations or does it also exist with this method of installation. I'm not going to update ANYTHING until I know for sure.
After the last update this morning, which involved, among other things, the updated version of the linux kernel, upon rebooting, the computer froze at the fedora logo.
Machine is a Dell Optiplex GX260, Pentium 4 with ATI Radeon RV200 QW [Radeon 7500]. I believe this is an AGP graphics card. I also believe that the graphics card is the root of my problem. In Karmic, I could get the computer to suspend. but it would not resume. The monitor would not initiate and it seemed as though the system froze. Only way out was a hard reboot. Hibernate worked for me without any problems, so it was no deal breaker. Now in Meerkat, Suspend behaves exactly as before. However, I can not get the system to go into hibernation.
The monitor goes down, but the system seems to freeze and never go down. I have tried editing the options in the acpi-support file to no avail. I have tried disabling compiz (which works amazingly well with this card), to no avail. I am using the open-source drivers and I have not tried the closed-source drivers in this system. I tried the closed-source drivers in Karmic and they made no difference. I may try un-installing the ATI card and fall back on the on-board Intel chipset to see if that solves the problem. Only then, I will loose 3d effects, etc.
My system just froze while I was browsing, never had it happen before so I was quite shocked, anyway just restarted it and now it wont boot. Got all my school work on there so now Im stressing.
This is what comes up:
Gave up waiting for root devices. Common problems:
What can I do to recover this as I was stupid enough not to back up my school work?
My system froze when watching a flash video and I had to do a hard reset. Now when I boot into ubuntu I can't open the software centre or the update manager. Is there a way to check what's wrong or a way to reinstall everything from terminal? Synpatic still opens and works.
It's taken a lot of work, but I have figured out over thecourse of many many fresh installs over the past few days that the kernel updatefrom the update manager in ununtu is breaking my system. This is both for the -22 and -27 updates.Is anyone else having problems with these and/or is there a fix?
I'm running Ubuntu 10.10 Maverick Meerkat and I'd like to know when does the update manager upgrade the system to Ubuntu 11.04 Natty Narwhal. I do not want it to do the upgrade too early,as this might cause problems.I heard they're going to release Natty by the end of April,when it passes the beta stage but it will take 3-4 months for the bugs to be fixed. Also,please answer my other thread,it has new posts: [URL]
I was doing software update under administration, but I can't update. I just installed F12 I get errors like the ones below. Click on links for the pics [URL] and [URL]
Yesterday my wife was using our laptop and an upgrade manager dialogue box came up. She clicked yes to install upgrades, but at some point during this process the machine froze. She restarted, and I haven't been able to successfully boot since then. the final screen when trying to boot from the hard drive reads:
Killed mount: mounting /dev on /root/dev failed: No such file or directory mount: mounting /sys on /root/sys failed: No such file or directory mount: mounting /proc on /root/proc failed: No such file or directory Target filesystem doesn't have /sbin/init. No init found. Try passing init=bootarg.
[Code]...
I'm slowly getting the hang of Ubuntu. By now I know enough that a Live CD can fix most problems. So that's where I went after doing several searches about the error messages that were appearing. The menu screen works, but I can't get it to boot into the "Try ubuntu" mode. I tried changing the boot parameters to no avail. As the boot tries to load I can see a line by line report of errors- some are I/O errors and are in white, but many were in red, which seems bad from my mostly ignorant perspective. I saw lots of SQUASHFS errors among other things. I took a snapshot of the screen that was displayed when the boot failed- it's attached to this post (lots and lots of text to be typed otherwise). The reason I know it failed is because I've tried a half dozen times with the same exact result- once I let it sit for an hour+ just to make sure it was really frozen (a bit optimistic).
Relevant info: Ubuntu is running on a Dell Inspiron 8600 laptop. I think it's version 9, but could be 10. The Live CD I'm using is version 10 burned 1/4/2011. I'd be thrilled to hear any suggestions that folks might have.
I have a netbook, on which I installed the netbook remix. It had ran fine until one day, I shut it down while it was updating. Now, on bootup, it will take me to the login screen and then basically freezes. The keyboard and mouse do not work and I cannot login to any profile. I tried a clean reinstall, but it only finds the preferences I have and sends me right back to the login screen.
I recently installed Ubuntu 9.04 off of a disc and it worked perfectly, however after I downloaded and installed the system updates from the update manager, it stopped working and it won't even see my device. I have a Zonenet ZEW2500 USB wireless adapter.
Network-manager-gnome caused an error during system update.Quote:network-manager-gnome: Depends: network-manager (>=0.8.99 but 0.8.4~git.20110319t175609.d14809b-0ubuntu3 is to be installedHow can I update network-manager?
I am having issues with Update Manager after cancelling an Update.The Update Manager shows a number of required updates, but when I click on Install Updates... Nothing happensWhen I launch sudo dpkg --configure -a in a terminal I receive the following message:dpkg: status database area is locked by another process.On another forum i saw something regarding a gksu.lock file that needed to be deleted... but I can't find any such file....If I try to launch update manager via a terminal: sudo update-manager I get the following error:
requiredDownload could not be calculated: E:Unable to parse package file /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_karmic-updates_main_binary-amd64_Packages (2), E:Unable to parse package file /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_karmic-updates_main_binary-amd64_Packages (1), E:Unable to parse package file /var/lib/apt/lists
I was logged in, but had not used the computer for about 48 hours. When I 'woke' the system, I could see that Thunderbird and Firefox were active, just as I had left them. I moved the mouse, the screen went black and the mouse pointer was visible (and could move). The system stayed like this for about 2 minutes, then wend down completely. I cut power, booted and got the login screen. Each time I put in my password, it looks as if it is loading but then just goes right back to the login screen. I have no problem logging in as root.
when i am tryg to upgrade to lucid from karmic, update manager starts and shows my system is up-to date. command used "update-manager -d"os karmic 64bit.
Ubuntu 10.04 64 bit I have not been able to update using the update manager or by using the package manager. It seems when the update manager tries to download all the requests fail.Anyone else had this problem??
using mint 10, now after updates my system is barely working. The programs were no longer showing in the task bar, and the system was running much slower.
[code]...
This repeated over and over again. My temperature was never to high 40-55, and I found a suggestion to update my kernel to 2.6.37-020637. After doing so there is no longer the thermal limit exceeded error but the computer is still running poorly. The system is slow and again no programs are showing up in the task bar when open.
