Ubuntu :: Computer Will Not Boot From The HDD And Will Only Boot From The USB Drive That The LiveCD Is On?
Feb 26, 2011
i have downgraded from Ubuntu 10.10 to Ubuntu 10.04. I've had some bumps along the way and finally was able to install 10.04 successfully. Right now, my computer will not boot from the HDD and will only boot from the USB drive that the LiveCD is on. When I reorganize to set HDD as primary boot, i get:id-laptop login:d-laptop password:and I can put that in but then it just gives me a command line that ends with ~$ i believe. How do I get it to boot from the HDD instead of from the USB without running into this problem?
If I resequence the boot to HDD as number two, it will juts go into the LiveCD mode. Am I supposed to reinstall 10.04 again? I know 10.04 was successfully installed because it said it was and it needed to restart so i hit the restart button. It also had my old desktop picture there and all my files AND i checked the system info before restarting (it confirmed that lucid lynx was running).
View 4 Replies
ADVERTISEMENT
Feb 26, 2009
The Ubuntu installer think my /boot partition is (hd0,0). This is what it writes into grub menu.lst. My computer won't boot after install completes. The Ubuntu live CD shows this boot partition is (hd4,0) (sde1). But that doesn't work and after editing grub menu.lst to (hd4,0), the computer still won't boot. Some searching at the grub command line show the correct value is actually (hd1,0).
View 8 Replies
View Related
Jul 29, 2010
I burned the live version of OpenSUSE 11.3 (Gnome, 32bit) to a CD to test the compatibility of an HP Pavilion p6510f. Although Xubuntu 10.4 booted up fine, OpenSUSE did not. A message about RAID would appear (too briefly to read) and then the computer would reboot.I checked in the BIOS and found that the SATA drive has 3 modes: IDE, RAID and AHCI. The hard drive was set to RAID.
When I changed the hard drive mode to IDE, I was able to run the OpenSUSE live CD; but the change ruined my Windows installation. Windows doesn't boot under IDE or RAID mode. (I have reset the mode to RAID and am restoring the Windows installation.) Is there an option/argument that I can pass to the kernel so that OpenSUSE will work under RAID mode? (Since Xubuntu 10.4 was able to do it, I'm assuming OpenSUSE should be able to.)
View 9 Replies
View Related
Dec 30, 2010
i do software (learn keyboard) for blind people. I selected ubuntu and festival and TTS. Please i NEED (mandatory for disabled people) live cd what can be inserted into cdrom and everything is done - automatic boot, settings done, software is on start-up... created own distribution, programed software, done settings, but what kills me is : How i can run AUTOMATIC (without asking, no enter) boot from CD-ROOM. Now CD asking :
- 1) What language want you (here is only czech) - need ENTER (killer for disabled people)
- 2) Boot from CD or hdd - need ENTER (killer no. 2 for disabeld people)
- after 2) I m ok, i can handle it myself, works.
I edited file in isolinux menu.lst etc - I can edit text but i do not know how run defalut choice automaticly. timout 0 does not work I spent a lot of hours reading tutorials grub/isolinux and have nothing ...
View 3 Replies
View Related
Jan 11, 2010
How do I get a computer to boot from a USB flash drive with a bootable image when the computers bios does not have a USB device as a boot choice ?
View 1 Replies
View Related
Jan 9, 2011
I have a laptop with two partitions, one with Windows XP and one for storage (formatted in NTFS). I would like to install Ubuntu on the storage partition, but my problem is that I can't boot from CD (or anything else) because my BIOS is password protected. I obviously don't know the password. y question is: If I plug the laptop's hard drive into another computer, install Ubuntu as described above and then reconnect it to my laptop, will it work?
View 2 Replies
View Related
Dec 17, 2009
I had put a second Sata hard drive in my computer and was pleasantly surprised not to run into any problems. No BIOS changes, just start the partitioner, partition, mount, it worked.And then... my computer didn't boot today.I disconnected the new hard drive and it went a little bit further, allowing me to log in as root and remove some lines in /etc/fstab. After that, it booted without any issues.I then remembered that the new drive was /dev/sda and the old drive /dev/sdb. I assume this is the reason for not booting, there is no GRUB on /dev/sda. How do I fix this? Can I simply plug in the cable for the new drive where the cable for the old drive was?
View 4 Replies
View Related
Jan 4, 2011
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
View 9 Replies
View Related
Apr 8, 2011
I have a Western Digital 1Tb WD10EAVS Caviar Gp Hard Drive. It does not have an operating system installed but it have alot of my important files. The hard drive began making a clicking sound and when I boot up my computer I see my other drives and the sata slot for that drive remains blank. Can any one help me recover or fix my hard drive
View 1 Replies
View Related
Mar 21, 2011
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies
View Related
Dec 16, 2010
I followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
View 7 Replies
View Related
Jan 6, 2011
it started with rooting my Motorola Droid. I got quite interested in the whole rooting/linux "world". The only problem is, my hands move A LOT faster than my brain does. I'm an "educated novice" at best when it comes to all of this and still learning slowly, but surely. I followed an online tutorial and before I realized quite what i'd done, I had dual installed Ubuntu linux 10.10 on my laptop. ISO'd this, partitioned that and realized....i'm in way over my head. Then I started researching how to just go back in time and get my "safe" windows vista back until I'm ready to make the switch to linux and just ended up getting more confused.
How do I actually BOOT into Windows on a dual boot computer that I apparently just created? How, if need be, do I undo everything I just did in the past few hours and careless tinkering? If I decide to stay with Linux, how do I get my damn wireless router to recognize?
View 9 Replies
View Related
Mar 1, 2011
I have (had) a dual boot computer;Win XP and Ubuntu 10.10 64 bit.I decided it was necessary to enlarge my Root and Home Partitions. Using the instructions http://ubuntuforums.org/showthread.p...ome+Partitions I successfully enlarged the partitions and restored 10.10 (I used the copy command suggested by Irony). However when I boot the computer it boots to Ubuntu but no longer gives me the option of going into XP(it is not listed in Grub menu). Is there a fairly straightforward way of getting XP back on the Grub menu so I can boot to XP again?
View 5 Replies
View Related
Aug 5, 2010
I have been having a problem with my 11.1 recently, in that it gets stuck at a point in the boot process that tells me "INIT cannot execute /bin/sh" then it says "INIT: id 1 is respawning too fast please wait 5 minutes" and tells me there are no more preocesses in this runlevel and repeats this no matter how long I wait. Since I couldnt find any information on fixing that, I decided to just upgrade to 11.3 with a boot disc. Now my computer wont recognize the disc to boot from it and still gets stuck at the same screen.
View 3 Replies
View Related
Mar 20, 2010
Recently I got a new computer:
Intel core 2 duo E7500 chipset
Gigabyte s-series GA-G41M-Es2l
Intel G41 express chipset.
I inserted the ubuntu 9.10 disc in and I clicked on livecd option and few seconds latter I got a trace back report. Is it that my motherboard doesn't support ubuntu or what is wrong. Why can't I boot into livecd?
View 1 Replies
View Related
Apr 18, 2010
I'm trying to boot off a USB LiveCD of Ubuntu 9.10 in order to save some data off a botched UNR install. However when I try to boot off said USB drive, I get this error:
Code:
process 2425: arguments to dbus_pending_call_set_notify() were incorrect, assertion "pending != NULL" failed in file dbus-pending-call.c line 596 The error repeats constantly until I turn off the netbook (EeePC 1008HA).
I've tested the USB drive using the "Check disk" option in the boot menu, and it comes up clean.
View 9 Replies
View Related
Jun 23, 2010
I am currently triple booting between Windows, Mac, and Ubuntu. I was having problems booting earlier and somehow Grub2 got replaced by Grub 1.5 command line. I can't boot into Ubuntu anymore, I can only boot into a LiveCD, but I can't figure out how to re-install Grub2.. I tried using Terminal to install Grub, but it still did 1.5 command line. I did sudo apt-install grub and everything. Nothing worked..
View 1 Replies
View Related
Jun 28, 2010
Ubuntu Lucid Lynx 64bit, HP ZV6000
I've boon doing a lot of reading on booting problems in 10.04 and it seems as though there are a lot of booting issues after the upgrade or, in my case, out of the blue. I've only been using Ubuntu for about 6 months now, dual-booting my WinXP box, and for the most part haven't had any issues. I upgraded to 10.04 via the update manager (or whatever it was that said: there's a new version of Ubuntu out there, please update) sometime in May and never had a problem (although I did choose a wrong setting for the dual boot but that just meant I couldn't get into WinXP).
Out of the blue one day, after being on the laptop for a few hours I decided to shut down and go outside. I did the same normal shutdown I always do and shut the computer down. I came back to it a couple of hours later and it wouldn't boot. The HP splash screen pops up (as normal) giving me the opportunity to go into the BIOS if needed and then the GRUB 1.98 loader shows the available versions: Ubuntu kernel, ubuntu kernel and Win partition. If I choose either of the two Ubuntu kernel's my screen goes blank and I get a flashing curser in the top left corner. And that's it. I've let it sit for an hour and nothing.
I tried to boot from my LiveCD (9.10) but the computer will not boot from the LiveCD. I took out the HDD and slid it into a USB connector and plugged it into another computer and only the WinXP partition shows. I can't even look into the non-OS partition I created specifically for circumstances like these. I tried the "GRUB> find /boot/grub/grub.conf" command from the GRUB menu and nothing. It comes back with a "find is not a valid command" notice. I have some music and videos on there I'd really rather not lose. Unfortunately, the laptop is too old to boot from a USB (BIOS isn't being updated anymore) and I can't think of any other options. As far as I know, my only other option is to format the drive and start over.
View 2 Replies
View Related
Jan 20, 2011
for the past couple of weeks, I have been booting from an Ubuntu LiveCD. Here's why: When I boot my computer (emachines E528 laptop), it gets to the BIOS loading screen (the one where you have the option to press a function key to get to the BIOS settings), then it goes to a black screen and looks like it is going to load GRUB, but instead of loading GRUB, the computer reboots. It does this endlessly, unless I insert a LiveCD. So, it's not the BIOS. That's good. When the Mint GUI (Linux Mint was the LiveCD I was originally using as I just happened to have it on hand) loaded for the first time, I checked all of the hard drive partitions and they all seemed to load fine. So, it's not a mechanical problem with the HDD. That's good.
At this point, I figured the MBR had become corrupted somehow. Now I wasn't really sure exactly where the MBR was, or how it all worked, but I was pretty sure that if I just reinstalled GRUB, everything would be hunky dorey. Unfortunately, I hit a road block when trying to install GRUB. That's not good. I am trying to follow the instructions in this thread, but I get the following error:
Code: grub> find /boot/grub/stage1
Error 15: File not found So then I tried following the instructions here, but I don't know how to tell which drive is sda1, sda2, etc. I'm guessing there's some terminal command to figure it out, but I don't know it and Google was less than helpful. I feel like something that basic should be easy to find, but I digress.
At this point, I am getting very close to backing up everything and reinstalling everything. Only problem with that is that I am not sure how to access the files on my Ubuntu partition as they are encrypted (I wrote down the key when I started it up, I just don't know how to bring up a prompt that will let me enter the key). I really don't want to reinstall and set everything back up, but if I have to I will.
So, I guess I just need to know how to tell which partition is associated with which sda#, or how to access the files in my encrypted Ubuntu home folder, or (hopefully) someone who can tell exactly what's going on from why I have posted and can give me instructions for fixing my problem. Also, here's a breakdown of how my hard drive is partitioned. Not sure why, but I thought this might be helpful: linky.
TLDR: How do I tell which partition is associated to which sda#? How do I open my encrypted home folder from my Ubuntu partition? After reading my whole post, is there any further insight you could offer that I may have overlooked?
View 4 Replies
View Related
Dec 6, 2010
I am building a 10.04.1LTS server. I am putting the /root filesystem into a Software RAID1 partition. I want to keeo my /boot partition outside of RAID.Is there a way to have a boot partition on both sda and sdb so if one drive fails the second boot partition will work away - or should this be kept in with RAID also.
View 6 Replies
View Related
Dec 12, 2010
When i pop in the live cd to boot from it gets stuck on the loading screen the one that looks like this:Ubuntu. . . . .The dots move until like 2 mins in and then they get stuck and nothing happens i let it sit for like 30 mins.The reason im using the cd is i already have installed ubuntu but then i installed windows xp on another partition and so im trying to get the grub back using the livecd.
View 1 Replies
View Related
Mar 21, 2010
I've been trying to get my LiveCD (9.10) to boot but I can't get it to work. I get it to the main screen then I select "Try Ubuntu without making changes to my system" and I get a whole bunch of information to pop up... looks like techno giberish to me. Then I get what essentially looks like a prompt, except no matter what I type I get nothing out of it. I just want to be able to use my liveCD without issue.
P.S. I'm using a Toshiba Satellite Laptop that has windows 7 installed.
View 2 Replies
View Related
Jul 8, 2010
I'm having a lot of trouble with a PC that has been running Ubuntu for ages, since about 8.04 I think. I've run the distro upgrade a few times and it was running 10.04, but for some reason won't boot anymore. So I'm trying to do a fresh reinstall but I can't get the LiveCD to boot. I'm trying to install 10.04 AMD64 desktop.If I leave the CD to boot, I get to a Busybox screen showing the error "No init found. Try passing init= bootarg." and an (initramfs) prompt. This is all displayed at 1280x1024 res - the native image of the screen I'm using.It's an NVidia chipset - an older one. So I tried hitting a key during boot and putting the nomodeset option on. I get the same error, but at a lower resolution
View 1 Replies
View Related
Aug 28, 2010
I upgraded from 9.10 to 10.04 this past week. Foolishly, I tried to finish it quickly, and let grub fiddle with my Vista volume, sdb1. I realized it after I agreed. Shucks! Now, my computer won't boot unless I go to the ROM. A bit of history, my original 9.10 install was on a formerly dual boot 160 Gig IDE drive. This one was really just my main Ubuntu drive (sba1). I would have gladly gotten rid of the useless NTFS side of it, but never wanted to bother. The terabyte SATA drive is my Vista volume (and general data drive). It has no Ubuntu nothing on it. When I wanted to boot to Vista, I would boot to sda1 via GRUB2 and then select Vista. It would then come up to the Vista Bootloader, and I'd select Vista and boom, things worked fine.Then I did my ugrade. Somehow, the original grub on sda1 got messed up. I have no idea how. I get the somewhat familiar error: the symbol 'grub_puts_' not found and unceremoniously dumped to a grub rescue>_ prompt. Great! I can enter the ROM and tell it to boot from sdb1, then grub comes up exactly like before and I can select Ubuntu and 10.04 comes up!
So my MBR on sdb1 has now been ruined by GRUB2. Now I know I should never have allowed GRUB to write to sdb1, but why did it also mess up sda1?To make matters worse, I can't use the various boot-to-LiveCD solutions rather common out there. I downloaded the ubuntu-10.04.1-desktop-amd64.iso and burned it. But since I got my new 25" monitor for Christmas, I guess it's too much for the poor old LiveCD disk. I upgraded via the Update Manager, so the video wasn't an issue. Now, when I boot from the LiveCD, the screen turns black and that's it. Take the disk out, reboot, and you're back to the ROM or that beautiful grub rescue>
View 2 Replies
View Related
Sep 21, 2010
I have a MacBook Pro 6,2 that try as I might refuses to boot from live CDs. I have rEFIt installed, and both of the liveCDs I've burnt for 10.10 (32 and 64 bit) do not show up either in rEFIt or when I hold down "option" as my mac boots.
Both CDs will run perfectly as either liveCDs or Installations in Parallels, but I'm looking to (hopefully) someday replace Mac OS entirely with Ubuntu. Being completely unable to see these liveCDs presents a bit of a problem though..
View 5 Replies
View Related
Nov 17, 2010
A 10.10 LiveCD (burned from the ISO image) won't boot my system using my LG GSA-4167B DVD drive which has been working fine for several years.Upon boot, Ubuntu starts to boot up. The splash screen appears. The drive activity light flashes for a while and it sounds as if things are progressing. Then the drive gets into a funky pattern: click-click-spin fast. click-click-spin fast...
The purple splash screen is still present, with 5 red dots (not flashing) The LG drive happily boots up a Windows CD, BartPE CD, Ultimate Win CD, Macrium recovery CD, Gentoo distro CD, etc etc. Only the Ubuntu 10.10 LiveCD is problematic.Oddly, a 10.04 LTS LiveCD obtained with the book "Ubuntu for Non-Geeks" boots OK. (that CD is not burned at home). The LG GSA-4167B is 2005 vintage, with IDE interface. I swapped it for an even older (2004) LG DW1610 DVD drive. That drive boots the 10.10 LiveCD just fine.
I downloaded the 10.10 ISO image a second time and burned a second copy. Same results. The LG website had new firmware available for the GSA-4167B drive, so I downloaded that and flashed the drive. No change - it still won't boot the 10.10 CD. Are LG drives known to be problematic with Ubuntu? Are the CD-DVD drivers on the LiveCD limited in their functionality? If I go out and buy a new drive, should I avoid LG products? Perhaps I'l try burning the 10.10 ISO on to a DVD and see if that makes any difference.
View 9 Replies
View Related
Jan 31, 2011
I have Fedora 14 installed on my laptop (Installed with few issues) and I'm trying to install ubuntu on my desktop. I had ubuntu 10.04 installed before on a second (250gb) hard drive (Windows 7 on the other 1TB drive) with a few issues and kinda screwed a few things up trying to upgrade to 10.10. So, I said screw it, and downloaded the live .iso for 10.10 (x64) and burned it to disk. I boot from the live CD and choose the install option to use entire 250Gb disk. I choose my options, including to download updates and install 3rd party software and let the install run its course. Everything seems to be going fine and it asks me to restart. So I say yes, the disk pops out and the screen goes dark... and then nothing happens. The computer's still on but hasn't restarted yet. I hit the del key (Which I use to enter BIOS) and the computer finally restarts. I enter BIOS and tell it to boot from the 250Gb HDD, save and exit. However, it gets stuck at the point where it (It, I assume to be the motherboard) says "Loading Operations System ..." and with a blinking cursor on the line underneath. Nothing happeneds.
I tried again just this morning using the same procedure. I'm once again stuck at the "Loading Operating System .." screen.
EDIT: After poking around a bit more, I remembered I was confronted by a GRUB menu when I booted into Windows 7 HDD. So, I selected Linux from the menu and all seems good. Does anyone know why this is? It's very odd, well at least to me. Why would GRUB be on the windows hard drive? Is this something I should be concerned about?
View 2 Replies
View Related
Jun 18, 2011
I've got a Macbook Pro with rEFIt and Windows 7 installed (I'm not sure if this is relevant), and I'm running into an issue when I try to boot from the LiveCD or a USB (64 bit, due to 4GB RAM).
If I boot from the CD, the Ubuntu splash shows fine, but I run into the error message:
"(initramfs) Unable to find a medium containing a live file system"
I tried then to boot from the USB using rEFIt, but it just gets stuck at the grey screen with tux. The disk images both are OK.
View 9 Replies
View Related
Oct 7, 2010
The computer I'm using is a Dell Vostro 1000. If you need any specific stats, let me know and I'll post them, but I don't have access to anything that will list them.
As of this afternoon, Grub will not longer boot. I don't know what prompted it; the only change I made was to the power management settings and installing IcedTea. It brings me to "BusyBox" after saying "No init found. Try passing init= bootarg." Then it brings me to some command prompt that doesn't respond to most bash commands I know, and it says "(initramfs)."
I had that problem two or three weeks ago after Fedora broke Grub, but I fixed it by using "grub-install" in an Ubuntu LiveCD. (No easy task to find what command I needed to use, though.)
But, now the LiveCD won't load. It hangs on the splash screen that just says "Ubuntu" with the dots underneath that indicate it's loading. This exact same disk (and I've reburned it, of course) worked fine when I had to clean up the mess that Fedora made. I tried switching to a terminal at the point where it hangs and there are no messages at all.
I already tried using acpi = off and burning the disk at the slowest speed (from two different computers).
I tried with the Mepis LiveCD, but the GUI just shows a blank screen. I can run commands using Alt+F2, and the cursor is visible, but that's it. I can switch to a terminal, but I can barely use grub-install at all as it is, and I can't figure out how to mount a drive through the command line.
An older version of a Sabayon Linux LiveCD works fine, but, unfortunately, doesn't do anything useful. I haven't tried Knoppix because it never worked on this computer.
If there are any other distros that I can use to run grub-install (preferably lightweight; I'm getting impatient downloading so many 700 mb iso files), I'm open to suggestion. Those are just the ones that I'm familiar with already.
View 4 Replies
View Related
Aug 18, 2010
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows...
sda1 = Win7 system (default install)
sda2 = Win7 Main (default install)
sda3 = swap
sda4 = Extension (I think thats what its called)
sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
View 4 Replies
View Related
