I have installed Winxp & ubuntu 10.04. All are running excellently but i cannot brows my windows drive from lucid. in jaunty or karmic i use to work in ubuntu but all files were stored in windows drive. But in lucid i cannot find windows drives.
View 3 RepliesSo I made a text file on a windows machine and brought it home on a flashdrive. When I opened it in PCMan File manager it did not show, but executing ls in a terminal shows the text file just fine. It is the only one that appears to be missing in PCManfm. I've had a similar problem going the other direction (Linux to Windows, but with pdfs) many months ago. here is ls -l
Code: Select all/media/FE32-A2F6/Translation/Kevin$ ls -l
total 2344
-rw-r--r-- 1 feelactthink feelactthink 2374182 Feb 19 11:19 Artigo 3-SAGE V4.docx
-rw-r--r-- 1 feelactthink feelactthink 3686 Feb 19 15:21 HP Cable Recall
-rw-r--r-- 1 feelactthink feelactthink 3686 Feb 19 15:21 HP Cable Recall.txt
-rw-r--r-- 1 feelactthink feelactthink 4891 Feb 20 17:58 Translation.txt
The file is Translation.txt. What is different about this file that it would do such a thing? It doesn't look at all different from above.
i currently have lucid installed on my laptop hard drive. i took this drive out and then on a new drive in its place i have installed windows 7. reason why i couldn't put windows 7 on the same drive is that i have a BIOS based system and the hard drive is GPT based not MBR. therefore, i couldn't get windows back on it.
I figured that using an esata expresscard interface i should be able to use the Windows 7 drive externally without much speed penalty since ExpressCard in my case is implemented on PCI Express and not USB.
So i can update grub using
Code:
update-grub
and Windows 7 appears on the list. However, when i select this option during boot, it gives me errors that indicates that the external drive cannot be found (not surprising)
My guess is that when GRUB appears, the external hard drive has not been detected yet, and the modules for the expresscard may only be loaded during the boot process of lucid.
So I am wondering if there is anyway I can get this to work. meaning use lucid on my main drive and boot to Windows 7 from the external drive time to time.
I have a Onetouch 4 mini 160GB I bought a year ago. I t used to work fine but all of a sudden it started to become a problem device. My home pc has two operating systems on it: Windows 7 and ubuntu 10.04 lucid. the drive often fails to load on both systems. Sometimes it's recognized, but the reads are very slow and opening a folder on the drive takes around 120 seconds. Itried reformatting the whole drive, chicking it with chkdsk but it didn't help. Now I have around 70 GB of data on the drive. On my office pc I don't have such a problem and the drive works fine.
My home pc has an Asus P5B motherboard and intel core 2 duo cpu. I tried unplugging other usb devices, plugging in the extra power cord (data + data/power) and it didn't help. The drive also makes beeping sounds when I try to browes the files on it. I'm sure thid is not OS related as both Windows and Linux have the same issue. This is the output of dmesg | tail command on linux. You can see the os keeeps "resetting" the drive:
[Code]....
I have a Dell Inspiron 1764 with 4GB of RAM. I have Win7 and Lucid as a dual boot. My processor is quad core Intel Core i5 M430 @2.27GHz. The problem is that I should show 4GB of RAM but the Ubuntu side only shows 2.9GB and the readout on conky shows 2.88GB. Why is this? Is Ubuntu not utilizing all available RAM?
View 8 Replies View RelatedAll my other apps and Nautilus when I open a folder can display the menu perfectly, except for Filezilla. I need to use Alt + E to use the inner menu items. but the main menu is always invisible to me.
View 4 Replies View RelatedOn My Ubuntu 10.04 Lucid 64 Bit Server, top command showing CPU usage 9999% for java process.But htop command or ps -aux is showing accurate usage.After googling, i found that its bug related to "sum_exec_runtime', but the Patch given is not working. [URL]
View 3 Replies View RelatedAfter doing clean installs of the last two Ubuntu Releases, Jaunty and Karmic, I decided to try an upgrade to Lucid. The upgrade went well and I'm satisfied with it, however I have a question about the repositories.All the sources in /etc/apt/sources.list correctly point to Lucid, but in Software Sources / Other Software I still see references to Karmic. Is this something to be concerned about? Can I (or should I) change them to Lucid?
View 1 Replies View RelatedI have a load of partitioned hard drives and even though the are refrenced in fstab I still get Bookmark Icons and they are also visable in 'Computer'How do you remove these icon?I would also like the ones not refrenced in fstab to only be mountable via password - lucid seems to just mount when you click, I did change this as in another post but it also made USB keys need a password
Code:
gksu gedit /var/lib/polkit-1/localauthority/10-vendor.d/com.ubuntu.desktop.pkla
change the ResultActive=yes to
ResultActive=auth_admin_keep
i'm using ubuntu lucid.apt-get suggests me ubuntu updates from the lucid-proposed repository even if it's not enabled in my sources.list.Perhaps it was enabled in the past but now it's not.How can i avoid that unwanted packages ?
View 1 Replies View RelatedI have only been using Ubuntu since shortly after Lucid was released. I am a new convert and use it to run a back-up device / media server I have a total of 5 hard drives in the device. I have the Lucid system files written to /dev/sde. I am running a Raid 1 array with mdadm on /dev/sdc and /dev/sdd. I have been prepping to run a second raid 1 array with /dev/sdb and /dev/sda with the ext4 file system. I formatted /dev/sda to have a full partition of /dev/ sda1. I then went to do the same to /dev/sdb and the drive was missing from both gparted and the native disk utility. My array with sdc and sdd is still running with both drives working fine.I swapped the sata cable from sda and sdb with no change. The system will not recognize sdb no matter what I do but it does skip /dev/sdb in boot up which tells me it does see it.I have provide the output of the commands df, fdisk -l, and cat /proc/mdstat.
View 2 Replies View RelatedI can not see my usb stick on the desktop. I have set the options for storage media to automount, and when I run lsusb in as terminal, the usb stick is there. It just seems as if ubuntu is not realizing that the stick is a storage device... I can acess the device in windows XP, so i know that it isn't broken. This appeared when I upgraded from Xubuntu 10.10 to 11.04.
View 5 Replies View RelatedBackground: I'm a 20+ year Mac user, switched four years ago to Linux.I have NO experience with Windows to speak of. Whenever I've gotten a new box, it's either been home-built or a Mac.Now I have a new Acer Aspire AS7551 laptop, and although I have not yet booted into Windows, it comes with a Windows 7 Home Premium license. I've been running it with Ubuntu 10.04 off a flash drive and everything works perfectly.
What I want to do: I want to wipe the disk, install Lucid, and run Windows in Virtualbox (for the sole purpose of watching some Netflix and learning a little bit about Windows 7). For the purpose of this question, please accept that I DO NOT want to dual boot.The problem: From what I can find, I can't use the "recovery discs" that came with my laptop to create a virtual machine. This is confusing, because it seems like I paid for a legitimate Windows license for use with this laptop.
Questions:
1. Would MS exchange my recovery discs for a regular install disc to go with my license code if I explained this to them?
2. If not, is there a source for Windows ISOs that I can safely use with my license? (I am aware that the legitimacy of that approach is questionable, but I am quite comfortable with the ethics since I paid for Windows 7, own the license, and only want to use it on the same computer.
3.If not,is there any way in heck I can use my recovery disc to create something Virtualbox can work with?
4. If not, how are all of you people getting your Windows virtual machines going??
(I have read that Acer is a major hassle to get a refund from for the "Windows tax" so I might as well be able to use it--this is MS' chance to win over a fan if only they will let me!)
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I use a flash drive for regular back up and other work and this has been very successful until two days ago. None of my USB flask drives are showing in the Places menu when I connect them. I have a dual boot with Mint and they work perfectly in Mint. A few days ago I was unsuccessfully trying to get my Broadcom wifi card to work and was following threads to install and uninstall various firmware programs. I am not sure if this caused the loss of the USB drive. When I go into System Profiler and Benchmark nothing is showing under USB devices.
View 9 Replies View RelatedAlright. So recently I've been having computer trouble and need to clean install my OS on my main Hard Drive. That normally wouldn't be a problem but there's some stuff on my main hard drive that I really don't want to part with, SOOO I figured I'd pick up a new HD and OS and move the files I want to keep before clean installing. I have my new HD installed and everything and it even shows up as a option in the boot menu. I'm currently running Ubuntu from a Flash Drive but only my old hard drive will show up. How can I access my other HD?
View 1 Replies View RelatedI have an Ubuntu 8.04 machine, I have a NFS drive being mounted when the system starts up. The entry in /etc/fstab looks like:Code:server:/srv/Pictures /mnt/share nfs rw,hard,intr 0 0The drive is mounting fine, but I would really like it if the icon did not show up on the desktop for this drive.Is there anyway to keep it from showing?
View 3 Replies View RelatedI have an western digital elements external drive that is mounted on ubuntu 9.10. It mounts ok however when I go to a certain folder on the drive only some of the files show up. HOwever if I try to access it thru another program (xbmc file manager) all the files show up.
The files are there but I cannot view them. Also if I copy or move a file to that folder is dissappears but the file is still on the drive.
Any help. I also already hit show hidden files and nothing.
I just installed ubuntu, this is my first time with it so excuse my ignorance regarding it. My issue is that ubuntu does not show my secondary slave seagate hdd .. it only shows and installs on my western digital master primary one. I need to have access to my slave drive because it has data on it which i wanna use.
My secondary slave shows up in my windows and bios just fine. So what gives?
I have a Lucid Lynx server running with a 6 GB for /home and a data partition of 400 GB mounted inside home (/home/user/data). The data partition is shared through SAMBA for access by other windows machines on the network. However, the capacity of the samba share shows up only as 6 GB (or less) while the actual capacity is 400 GB. I am assuming that this because it is mounted within the home partition. I understand that 400 GB is still available even though the SAMBA drive shows only 6 GB (or less) capacity.
The problem is, I am trying to setup Windows 7 Backup and Restore on one of my laptop. The backup stops with an error that the network drive does not have enough disk space. I think that this is because the samba drive only shows up as 6 GB or less capacity even though it can store more.
How do I fix this problem? How can see the actual size of the SAMBA drive (in my case 400 GB) in stead of the remaining space in /home partition? I know I can reformat my drive and make my /home 400 GB. But I am not sure if this will fix the problem. However, I will prefer to this without formatting.
In my system i have 3 250 GB Hard drives in a RAID 5 configuration. unfortunately, i cannot see this volume in "Computer", so i am unable to access any of the files on the volume. wierd thing is that when i enter disk utility, it finds the drives, and recognises them as a RAID volume. any ideas on how i can access the files on this drive
View 3 Replies View RelatedI just added a new drive, formatted it, and everything is ready. except that it does not show up under "places" in dolphin. Removable drives show up almost instantly, and same with all my other useful partitions*, but not this one. I can add a link to the folder it is mounted in, but that is just not the same...
is there something I need to do to fix this?
*(swap are not usable partitions)
I had a 500gb hard drive that I wanted to use on my Ubuntu system as a media storage drive. The drive originally had two partitions on it,one was a Dell Recovery partition and the other was a Windows Vista partition. Using the Palimpsest Drive Utility that comes with Ubuntu, I deleted both partitions,created a Ext3 partition using 100% of the space and copied my data to the drive. After I finally got fstab to load the drive, I found another problem. First of all, when Grub loads, two options it offers are:
Windows Vista (loader) on sdc1
Windows Vista (loader) on sdc3
Aside from that, 100% of the drive is not being used by the Ext3 partition.It is showing 434.6gb available on the drive. Fdisk is not showing any other partitions on this drive, so A) why are the Windows loader options showing up under Grub and B) why do I not have 500gb available?Here is a copy of the output fdisk -l:
Code:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes[code]....
My HDD is not showing up anywhere in Ubuntu OR Windows (I Dual Boot)I got a new 1Tb Samsung HDD, It was showing up in Disk Utility, where I was partitioning it and adding a filesystem, but then I had a power failure, and obviously, it all turned off.
View 5 Replies View RelatedI just bought a brand new hard drive, installed fedora with no errors. However when I try to click on the hard drive i get this errorunable to mount physical volume, not a mountable file system, ( I only have 1 hard drive and fedora boots up fine so its got to be working)I installed hardware browser and no hard drives come up
View 10 Replies View RelatedI have a load of Maxell 2GB flash drives which I bought new.
It has a Public Partition and a Secure partition on the flash drive.
gparted and disk utility see it as 2 volumes. I need remove the 2MB secure partition to make the 2GB stick bootable. However since it's showing up as 2 volumes I can't see how to do it. Probably requires totally wiping the flash drive.
Can anyone recommend how I go about this?
I was foolishly messing around with Grub trying to get it so it only show my two most recent kernel versions of Ubuntu and Windows 7. The tutorials on how to do this were not clear, so I deemed it not a big deal and ultimately didn't end up making any changes. However when I restarted to boot into Windows 7 it was gone for Grub's boot list. I looked at the grub.cfg file and in it under os-prober, where i'm assuming Windows 7 should be there was only Vista (which wouldn't boot when I tried it, just a black screen). I had upgraded from Vista over the internet when Windows 7 first came out, then installed Ubuntu and it worked fine until this. I am using 64-bit Ubuntu 9.10, and have Grub 1.97 beta~4 installed, which was installed with Ubunutu.
View 9 Replies View RelatedI'm using Ubuntu and after updating it in gnome environment every window that I opened have not title bar and close, minimized and maximize button is not showing
View 4 Replies View RelatedRandomly my windows borders are either there are not, whats up with this? Its makin things a bit difficult minimizing windows switching windows etc, it doesnt happen all the time, just every other time i boot up, but its happened twice in a row now. And when it doesnt do it sometimes the borders close, minimize and expand boxes just disspear along with the title at the top i.e Firefox [URL]
View 9 Replies View RelatedI Currently am running Ubuntu 10.10 on a hard drive with three partitions. One with Ubuntu, a Media partition (Music, Videos, pictures, etc.) and the last is my Windows 7 installation. I can acess all of these partitions in nautilus as well. However when I start up my computer it automaticly loads into Ubuntu and when I manage to see Grub I only see 3 Entries Which are the Ubuntu kernel, Ubuntu recovery Kernal and memtest86+. How do I make Grub recognise my Windows 7 Installation?
View 9 Replies View Related