The microdia driver although notprovided by the manufacturer or ubuntu was available online and supported upto 9.10...but not instead of supporting it natively the support has been completely removed...i am able to compile the driver but it doesnt get inserteda complaint was also made on the launchpad bugs section and the ubuntu brainstorm page also but no action seems to have taken.....
View 1 RepliesThe Fedora 14 (and 13) pwc Philips Webcam Driver.is only supporting 160x120 resolution (and nothing higher such as 640x480). Also not supporting some other things correctly, I suspect.I say so having tested multiple web camera software and either they don't work (because they have no setting for low res) or they do work if settable to low res., but not for any higher res.I also have a working setpwc tool which shows the driver does not support framerate resetting.I have a Toucam and Toucam Pro - same for both.Also these units worked fine under Fedora 11, and under earlier versions even Red Hat 4.But I usually got the latest pwc from Saillaird.org and compiled it to get full support but there are no more current sources there anymore, and the older ones don't compile.But as I am saying under F11 it was fully correct, now under F13 and 14 it is broken.
View 14 Replies View RelatedI seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
how to find out what driver my webcam is using and where its located the webcam it self works but goes from normal to dark after a minute of use and would like to fix it
View 2 Replies View RelatedI was wondering if Ubuntu supports webcams, I mean I want to buy a webcam (for example logitec or intex) but their specifications tells me that the drivers are only supported on Windows platform.
View 9 Replies View RelatedI have a several-year-old Logitech webcam, device ID 046d:09a1, which is not currently supported by the uvcvideo driver version 0.1.0 included in my 5.5 centosplus build. The uvcvideo site points to build instructions at the linuxtv.org site, which indicates one should be able to build modules for "vanilla kernels" 2.6.16 and higher. My attempts to compile from their source resulted in various layers of of errors, and I'm way out of my depth in figuring out the changes necessary to compile successfully.
My searches haven't yet turned up any detailed info about building these modules specifically for CentOS 5.5, so I was hoping someone here may have had experience doing this, and might be able to steer me in the right direction.
Alternatively, are there any plans on the horizon to update uvcvideo to a version greater than 0.1.0 in future kernel updates?
I have a webcam ( sn9c120 (0x0C45:0x6130) ) which I don't get to work anymore.
Module sn9c102 is loaded.
Plugging in gives me:
usb 3-3: new full speed USB device using ohci_hcd and address 2
usb 3-3: New USB device found, idVendor=0c45, idProduct=6130
usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-3: Product: USB camera
[Code]....
Just upgraded my kernel to 2.6.35 and now my broadcom 57780 WLAN card is not recognized. Trying to reload the proprietary driver fails. Anybody else with this specific card got it working on 2.6.35?
View 1 Replies View Relatedand also I need to find answers for following two questions.How to find mountable devices and their device files in Linux?How can I allow a regular user to mount a device in Linux?
View 2 Replies View RelatedUsing Ubuntu 9.10 I installed Ubuntu onto a second hard drive and everything seems to work fine except for the fact that I cannot install the driver (it says not supported or something) when I downloaded it from the website. I downloaded the driver made for Linux. The driver manager claims "no proprietary drivers." At the moment it shows to be using integrated graphics, but I need the full hardware graphics to play games. The open source alternate driver didn't work either.
View 2 Replies View RelatedI am trying to install set up of wanpipe for E1/T1 card. First of all downloaded the source code from [URL] and did all step needed for rpmbuild and copy the source code into /usr/src/kernels. Below is kernel information uname -r 2.6.18-194.3.1.el5
rpm -q kernel-devel
kernel-devel-2.6.18-194.3.1.el5
uname -a
Linux localhost.localdomain 2.6.18-194.3.1.el5 #1 SMP Thu May 13 13:09:10 EDT 2010 i686 i686 i386 GNU/Linux
Now point is when I run the ./Setup install for wanpipe its ask for path of kernel source which is present in /usr/src/kernels. its show : Kernel source 2.6.18-prep in /usr/src/kernels/kernel-2.6.18/linux-2.6.18.i686 is not supported! and set up is halted.So can somebody guide me why kernel source is not supported.
[URL]. I now have both monitor working and noticed my drivers are not current. I have the older ones installed. The 260.19.06 one. I installed via the suggested restricted driver utility in ubuntu 10.10. I don't have full use of the graphics and would like to install the latest driver.
Question:
1. Do I uninstall nouvea and nv drivers (still installed)
2. Do I uninstall the current nvidia driver, then do a manual install of the latest driver from nvidia?
I am migrating to Ubuntu and so far I find it superior. But there are a few things that are a little difficult to grasp. The installation of a webcam driver is intricate. I've downloaded the driver ov511-1.65.tar.gz which is applicable to my old and faithful Creative webcam. From [URL] I got the OV511 Installation Instructions:
But I fail at the first step, to become root. This is what I get:
Code:
coco@coco-desktop:~$ su
Contrasea:
su: Fallo de autenticacin
coco@coco-desktop:~$
I tried several times and wrote the password I use to start the session, the only one I have. It doesn't help that you are blind to the results of typing, but I tried again and again. I can't be that wrong always.
Also I can't decompress the driver.
How will i install our webcam driver ,if i don't know what is my cam model.
View 2 Replies View RelatedKernel : 2.6.35-24 generic.
Version: Kbuntu 10.10
======
WebCam:
======
. Genius FaceCam 312.
. Plug and play (doesn't work).
I can't determine which gspca I need.
just wanna ask how many firewall chains are supported by kernel? and what are there..?
View 1 Replies View RelatedI juset reinstalled my ubuntu and i can't update to the latest kernel. I'm stuck at 2.6.31-15. Also my grub is v1.94 Beta4 and can't upgrade it to grub2.
View 7 Replies View RelatedI know the latest kernel for 10.04 is 2.6.35.4, however all Synaptic shows is 2.6.32 versions.How do I get the latest kernels to show up in Synaptic? Barring that, is there a .deb package somewhere that installs it?
View 2 Replies View RelatedThis is old P4 laptop, Intel845G graphics (which I know is very troublesome).However, it works fine with the 2.6.35.22, but the update to 2.6.35.23 kills X during the boot process. Everything else works fine.Anyone else experiencing any difficulty with X and this kernel update?
View 3 Replies View RelatedI am looking for instructions on how to install the latest 3.0.3 kernel, and I can't seem to find much. I downloaded the necessary files from kernel.org, and they are currently contained in my downloads folder.How do I install this, now? Is there an easier way, like a PPA option to download and install from?
View 8 Replies View RelatedI want to have a linux distro thata has the newest kernel thats out now ,which kernelss would yuou recommend? or how would you download the newest kernel for fedora 13? or ubuntu. im using a acer aspire netbook and want to get some things to work.
View 6 Replies View RelatedI got tired of not being able to run any 3D apps on my integrated Intel and went out and came home with a ATi Radeon HD 4650. Skip the bit about how I could have gotten an nVidia (they didn't have any HTPC compatible low-profile nVidias on shelf).
Actually the card works very well, it runs all the 3D apps I've thrown at it so far (and quite a bit faster too).
My problem is with video playback: it is jerky. The framerate stalls and then speeds up and is out of sync. When not out of sync, there is tearing. Yes I have tried turning Compiz off, didn't do anything. Weird thing is the CPU utilization is really low, so everything should be working.
I figured I would update the video drivers to the latest available on ATi website (following the instructions here) but I've ran into trouble with the installer:
Code:
How do I proceed from here? If you've got a fix for the video with the drivers in the repositories that is cool also. I don't necessarily need the latest drivers.
I am looking to buy my own unlocked/never-locked mobile broadband modem, and I want it to work well on my 64-bit 10.04 Ubuntu system (triple-booting MacBook 4,1). Is there a list of mobile broadband modems supported in the linux kernel out there somewhere? I did try to find one myself, but no luck. The Huawei E220 looks good, but it is discontinued.
View 2 Replies View RelatedI read somewhere that if you run nVIDIA, that a PAE kernel won't work with it. Not supported, IIRC... Any truth to this? - My linux is (so it seems anyway) OK & I'd rather not mess it up. But I WOULD like to "use" all 4G of memory I have.
View 11 Replies View RelatedAn error occured when I install my r8101 dirver. I have got the message:
/home/driver/r8101/src/r8101_n.c:1: error: code model 'kernel' not supported in the 32 bit mode
/home/driver/r8101/src/r8101_n.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[3]: *** [/home/driver/r8101/src/r8101_n.o] Error 1
[Code]......
I'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
I have been trying to install the FGLRX driver for a Radeon HD 4850. According to this page and others on the web, it says that Xorg 7.5 isn't supported by the driver. I was just wondering is it possible to install Xorg 7.4 on Fedora 12, if not what release of Fedora should I use (i.e does Fedora 11 support Xorg 7.4?)
View 2 Replies View RelatedI just got a new computer and I have been busy setting it up with openSUSE 11.2. I am trying to install the Nvidia proprietary driver for my graphics card, a Geforce GTX 260, but it will not work. I added the Nvidia repository and I am installing the driver for GeforceFX series cards but every time I restart I get a command prompt and if I try to start x it says that my card is not supported. This is really getting frustrating, I need the proprietary driver so I can play DDO with Wine.
View 2 Replies View RelatedI would like to get driver source code and list of supported hardware for CentOS.If one can get (some of) these from CentOS-5.6-x86_64-bin-DVD-1of2.iso, where or how could I get?
View 2 Replies View RelatedI reported a bug at [URL].., then I had been asked to test the latest generic kernel in order to test whether the bug exist in latest kernel or not. I had read the information at [URL]... I installed the most current version of generic kernel. After that, I restart my computer and try to use the latest installed kernel. Then, the laptop freeze. Then, I restart my computer by turning off and on again, select the older kernel, successfully boot into Ubuntu to post this thread. What can I do since I am required to test the latest generic kernel?
View 2 Replies View Related