Ubuntu :: Installing Latest Generic Kernel?
May 6, 2010
I reported a bug at [URL].., then I had been asked to test the latest generic kernel in order to test whether the bug exist in latest kernel or not. I had read the information at [URL]... I installed the most current version of generic kernel. After that, I restart my computer and try to use the latest installed kernel. Then, the laptop freeze. Then, I restart my computer by turning off and on again, select the older kernel, successfully boot into Ubuntu to post this thread. What can I do since I am required to test the latest generic kernel?
View 2 Replies
ADVERTISEMENT
Jan 4, 2011
I am trying to figure out how to load the generic kernel in Grub2.
I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:
Code:
Why this will not load.
View 10 Replies
View Related
Dec 11, 2009
What is the most efficient way to install the different kernels, in particular the latest?
View 1 Replies
View Related
Feb 24, 2010
I want to compile a custom kernel, because I need a path for a device. Here is what I've done:
Code:
$ cd /media/work/temp/
$ apt-get build-dep --no-install-recommends linux-image-$(uname -r)
$ apt-get source linux-image-$(uname -r)
$ cd linux-2.6.31
[Code].....
View 1 Replies
View Related
Aug 26, 2010
What is the difference between those kernels that you can install from this PPA:
[URL]
ppa:kernel-ppa/ppa
...which currently has 2.6.35-19.25-generic
AND
[URL]
...which currently has 2.6.35.3-maverick (even has later version 2.6.36-rc2-maverick)
AND
[URL]
...which currently has 2.6.35.3 (even has later versions 2.6.36-rc2 and 2.6.36-rc2-git4)
Are they the same? Which is newer? Is 2.6.35-19-generic = 2.6.35.3?
View 6 Replies
View Related
Jun 27, 2011
Just installed the patches/upgrades for the 2.6.35.30 kernel. Ubuntu will not boot without me typing "y" and hitting enter and later hitting the enter key again. Just have a blank screen unless I do this. Discovered what to do by booting into recovery mode. Had to make a display selection. Just guess at the enter key the second time the boot process stopped. I new to Ubuntu so don't know where to look in the logs to provide additional information to help trouble shoot the problem. If some one can guide me as to where to look I'll post log info. Hope this is the right place to post this. If I need to make a bug report let me know.
Forgot to add: HP Pavalion dv5000 (dv5020us to be specific). AMD Turion64 processor. ATI Radeon Mobility 200M video.
View 7 Replies
View Related
Sep 2, 2010
I installed Mint 9 and directly after installation there were updates to download and install, which I did. One of the updates is a newer kernel, 2.6.32-24-generic.
When I manually install the nVidia driver 256.44 and restart gdm it works. When I reboot I land in low resolution, have to remove and re-install the older (195.36) driver through "Hardware Drivers". Somehow the new kernel and the latest nVidia don't match together. Am I the only one suffering from this or are there more people with this problem,and what to do about it?
View 1 Replies
View Related
Jan 9, 2011
I just noticed I'm not running with the latest kernel.
This box was originally installed as Ubuntu 10.04, then upgraded to 10.10.
I just recently noticed that, even though kernel 2.6.35-24-generic is installed, this box seems to insist on booting up with 2.6.32-24-generic.
Looking at /boot/menu.lst, it looks ok. (default is 0, and first kernel in list is 2.6.35-24. 2.5.32-24 is the *last* one in the list!)
View 3 Replies
View Related
Aug 5, 2010
Trying to compile Kernel 2.6.35 on Ubuntu 9.10 (2.6.31-14-generic).
got: The UTS Release version in include/linux/version.h""
does not match current version:
"2.6.35-xxx"
Please correct this
make[1]:***[debian/stamp/install/linux-image-2.6.35-xxx] Error 2
make[1]:***leaving directory `/usr/src/linux-2.6.35'
make:*** [kernel_image] Error 2
Can any one tell me what should I do? Is this Ok for using the compiled vmlinux image?where can I find the correstponding initrd file if this kernal compile is Ok?
View 1 Replies
View Related
Mar 16, 2010
I've recently upgraded from Ubuntu 9.04 Server edition to Karmic Koala 9.10 server.Earlier when I ran uname -r it showed: KernelVersion-serverNow the current version I've upgraded to shows 2.6.31-20-generic-pae.Should the Ubuntu server edition be using a generic-pae kernel?
View 9 Replies
View Related
Mar 22, 2010
My sound was working in the past, but since I upgraded to kernel 2.6.31-20, it's no longer working. I am using Ubuntu on a Macbook and followed instructions from the Macbook 6,1 wiki on [URL]... I just installed the lastest alsa-driver using the following commands:
[code]...
View 4 Replies
View Related
Jun 4, 2010
I installed Ubutnu 9.10 Server on my Dell Server for LAMP & OpenSSH server. After the install was complete, I noticed the the kernel installed on the server was 2.26.31-14-generic instead of 2.26.31-14-server.I am wondering why would generic kernel be installed from ubuntu-server 9.10 cd? And how do go about chaning to server kernel? Or do I even need to do that? Would generic kernel work as server kernel ?
View 2 Replies
View Related
Aug 30, 2010
I have problem with my laptop, the last week I update my kenel to 2.6.32-24-generic-pae and in this moment the wireless drive dosen't work.
View 1 Replies
View Related
Sep 6, 2010
I did the kernel update via Update Manager today. Unfortunately , after this , disaster happened whereby sh.grub> prompt appeared on screen.
I got no idea how to rescue or repair the grub. I installed Ubuntu 9.10 in my E: under Windows 7 partition and labeled as "ubuntu". It has dual boot capability.
View 6 Replies
View Related
Nov 30, 2010
This week my ubuntu 10.10 was updated via update center. I obtained the new kernel headers 2.6.35-23-generic but now I can't boot using this kernel version and I have to select manually 2.6.35-22-generic in grub. I can see the ubuntu plymouth splash screen but it never rise gnome. where are the boot logs and how to activate them, In /var/log/ I have "boot" file but is empty and in "boot.log" I cant see any usefull information (I have BOOTLOGD_ENABLE=yes in /etc/defaul/bootlogd).
View 4 Replies
View Related
Feb 27, 2011
I'm on Ubuntu 10.10 - fresh install 2 days ago, I marked all packages for upgrade in Synaptic, everything upgraded except 'linux-image-2.6.35-22-generic' kernel image. Now everytime I use apt-get or synaptic it takes ages as it tries to update the kernel image every time. The error I am receiving is as follows:
[Code]....
View 3 Replies
View Related
Mar 7, 2010
I was previously using kernel-huge until a slackware update caused some problems for me, so I switched over to kernel-generic but now I'm wondering if it uses both of my cpus on my dual core processor.
View 1 Replies
View Related
Jun 15, 2011
One thing I always do is switch to the vmlinuz-generic(-smp) kernel in /etc/lilo.conf and build an initrd (see /boot/README.initrd for details). The "huge" kernel used by default is only meant for installing and not recommended for everyday use. It has a lot of drivers you don't need built-in and uses more RAM than the "generic" kernels.
still trying to find my feet and get to know Slackware. In one of my previous threads, 'things to do after installing' i was told the above message. When i installed, it used the huge kernel, but i'm unsure if that was the one that got installed. when i start slackware up, above the login screen it say, �wecome to Linux 2.6.37.6-smp (tty1)� I was wondering how to swich to the generic smp kernel, do I just change the vmlinuz to the desired, in lilo?
View 9 Replies
View Related
Jun 30, 2010
Upgraded to latest kernel 2.6.32-23. Ubuntu 10.04 I run a twinview video configuration of 2 screens @ 1920x1200. On booting, X wanted to go to low res for the session, which reverted to one screen (that is, I lost the twin view), but actually kept the 1920x1200 res on the one. I restarted X on got both screen working with the second as a replica of the first. Something has changed in this version of the kernel. Reverted to the previous Kernel version (22) and all is sweet (twin view is back working). But this can only be a temporary workaround.
View 9 Replies
View Related
Jun 30, 2010
I have an ATI radeon HD 3400 series video card, and the open-source drivers make my computer run really hot. I tried installing FGLRX by using "Check For New Hardware Drivers", but it did not work, so I installed the ATI catalyst 10.5 package from AMD's website, and am using Xserver-xorg-core-1.7.6-2ubuntu7+backclear1 from k0ekk0ek's PPA so there is no lag when minimizing windows and such.
Everything was perfect until the 2.6.32-23 kernel update came along. I let it update, and rebooted, but the ATI driver no longer starts, even when I uninstall and reinstall it.
I am just using the 2.6.32-22 kernel for now, as the 2.6.32-23 kernel still runs hot without the ATI driver enabled. I would like to start using the new kernel at some point...
View 4 Replies
View Related
Apr 2, 2010
I'd like to compile a generic kernel for my netbook on my desktop. They are both F12 64bit. On my desktop can I do:
make xconfig
make
make modules_install
Then copy the folder to my netbook then:
make install? Is there a better way? I don't really want to make .rpms.
View 1 Replies
View Related
Apr 8, 2010
I've changed for huge kernel to a generic+initrd setup per the instructions in the README.initrd file however my machine fails to boot using that method. I get the following errors:
/boot/initrd.gz: Loading kernel modules from initrd image:
mount: mouting /dev/sda2 on /mnt failed: No such device
ERROR: No /sbin/init found on rootdev (or not mounted)
1. I've created the initrd using the results from /usr/share/mkinitrd/mkinitrd_command_generator.sh
mkinitrd -c -k 2.6.33.1 -f ext4 -r /dev/sda2 -m usbhid:ehci-hcd:ext4 -o /boot/initrd.gz
2. my root fs is ext4 on /dev/sda2
3. I've changed all necessary links in /boot
4. I've changed my /etc/lilo to:
image = /boot/vmlinuz
initrd = /boot/initrd.gz
root = /dev/sda2
label = Linux-Generic
read-only
View 12 Replies
View Related
Sep 19, 2010
I am going to change my hardware soon, just a new motherboard and cpu, same sound card,gfx card and other stuff. Will it boot and run ok ( like a live cd/dvd) until I have time to do a reinstall or does it have specific ports the hardware is installed on now?
View 6 Replies
View Related
Mar 20, 2011
I was interested in the idea of the btrfs subvolumes, so I made a virtual machine and installed Slackware as per the instructions here: [URL] It all went very well, but when I tried to switch from the huge kernel to the generic kernel and use the initrd.gz generated from step 29 (except that I used 2.6.37.4-smp instead of whatever's there) in lilo.conf, it failed to boot. I also noticed that in the instructions themselves, the poster doesn't actually add the initrd.gz to lilo.conf, so I'm guess the huge kernel has everything it needs to boot properly.
View 13 Replies
View Related
May 3, 2011
I've installed Slackware64 on a Toshiba Qosmio laptop (booting with ext4, SAMSUNG HM500JI HDD, 3 GB Ram, Intel Core 2 Duo Processor, Intel chipset and graphics).The system boots the huge kernel just fine. But after booting with the generic kernel AND after having prepared a mkinitrd with the mkinitrd generator, the boot process crashes at ~4sec with a panic.
View 14 Replies
View Related
Jun 20, 2010
Now, after restarting my ubuntu, I couldnot boot back into ubuntu.
After reaching the boot menu and choosing the "Ubuntu 9.10, kernel 2.6.31-22-generic" option, I get a new black screen with these in white letters
Boot from (hd0,5) ext3 507cefd1-74f3-489a-920a-d588e36b6476
Error 15 : File not found
Press any key to continue ... _
I had a previous thread which led me to this thread about re-installing an older version of the kernel [url]
How to re-install my kernel?
View 3 Replies
View Related
Jul 4, 2010
I recently updated the kernel to the newest version(2.6.32-23-generic) using the update manager and now I am unable to boot in to my Lucid installation.
My setup is LVM on top of a RAID 0 array. My computer had been running in this configuration since Lucid was released.
The Error Code I get on Boot is to the effect of: /dev/mapper/ubuntu-os is not available.. and then I get kicked in to Busy Box.
Once in Busy Box if I try to use mdadm to mount the RAID array I get this error:
If I boot in to the live CD I can mount all of the partitions and LVM volumes, so it does not appear to be a failed drive or volume.
I have looked in the mdadm.conf, lvm config and grub config files and searched the "Google" for an answer with no-avail...
Ultimately I would like to find a solution which doesn't involve a re-installation.
View 6 Replies
View Related
Dec 29, 2010
I upgraded my Linux kernel from 2.6.35-23-generic to 2.6.35-24-generic and the Broadcom wireless STA driver stopped working. If I try to reinstall it with Jockey it fails and shows this in the log:
[Code]....
View 3 Replies
View Related
Feb 16, 2011
My Slackware boots using the huge kernel. I am not using LILO; I am using GRUB from the extras directory on the DVD. I followed the tutorial @ [URL] up to the point where it discusses modifying LILO. My /boot/grub/menu.lst reads, in part:
# Linux bootable partition config begins
title Slackware Linux on (/dev/sda7)
root (hd0,6)
kernel /boot/vmlinuz root=/dev/sda7 ro vga=normal
# Linux bootable partition config ends
This boots the huge kernel. What changes must I make to the above menu.lst entry to boot using the generic kernel?
View 3 Replies
View Related
Mar 15, 2011
i'm attempting to configure the vmware server on the above mentioned system,without luck.i can't get the vmmon to compile. I have tried this out-dated guide [URL] but no luck. I have setup made the necessary links as explained in this guide [URL] I haven't managed to try out the any-any patch since no link to the patch is alive anymore.Since slack 13.37 is using 2.6.37.3 kernel I wonder if anyone has found a way to compile the vmware modules on these recent kernels.
View 12 Replies
View Related
