Ubuntu :: No Audio After Laptop Lid Opens From Sleep In Lucid?
May 2, 2010
All audio and sounds work just fine until I close my laptop's lid for a spell and reopen. On resume, there is simply no sound at all. It's all fixed when I restart, but being a laptop, I like being able to close the lid and come back to it every now and then.
I believe it's an issue from when Ubuntu changed their audio in the transition between Jaunty and Karmic, and it never got fixed. FYI, it worked just fine in Jaunty.
From past postings and research, it seems to be a lack of something 'waking up' or restarting when the lid opens. However, it's not 'alsa restart' or 'pulseaudio restart' or whatever. It's one little bug that keeps me from having sound without a restart.
View 1 Replies
ADVERTISEMENT
May 16, 2010
I am using ubuntu 10.04 . Even though i have set power options where it says "put power options to sleep" to "never"the computer goes to sleep after 5minutes. I again have to give the password to unlock .
View 1 Replies
View Related
May 28, 2010
I upgraded a couple weeks ago and now my monitor doesn't go to sleep like it used to.
The settings in powermanagment show that it should go to sleep after 10 minutes.
Can someone point me in the right direction?
View 2 Replies
View Related
May 4, 2010
You know that glitch where your monitor doesn't come back after switching off for power saving? That's gotten WAY worse since switching to Lucid. It used to happen every other day or so, now it happens 2-3 times a day. Songbird used to keep it from switching off on Karmic, but Songbird doesn't work on Lucid so that's out the window.
Also: as similar error happened when restarting after the glitch happened this latest time. Ubuntu started running its routine disk check and I hit C to skip it. The screen went down like it does in the Monitor Sleep glitch. I reset again, it did it again. Eventually, I just let it do the check. This has NEVER happened before.
View 5 Replies
View Related
Mar 28, 2010
I've got my Lenovo T60 laptop wireless running without too much trouble, the only problem is when i close my laptop lid and open it again the wirelessconnection is down and i simply cant click on the network icon in the notification area to re-connect as wlan0 is inactive. If i go to System>admin>network i cant activate the interface either as the 'active' button is greyed out, the only way to get the thing to come alive again (other than a full reboot) is to toggle the wireless switch on my laptop off and then back on.Not sure this should be required, i've got the interface configured to start automatically but it doesnt seem to care.
View 4 Replies
View Related
Dec 4, 2010
Whenever I resume my laptop, there is no audio... the only way to make it work is to restart my comp ...I am using fedora 14 on Thinkpad x201 .
View 1 Replies
View Related
Jul 4, 2010
user of Kubuntu 10.0.4. So far, one of the major things I miss is the ability to have my system sleep when I close the lid of my laptop. Any tips on how to enable this behavior? Note: as I said, I'm brand new to linux, so the simpler you can explain things, the better!
View 2 Replies
View Related
May 31, 2010
I have a laptop and wanna have it set up for going to sleep and waking up at certain time and then run certain files/programs. I used a single program for this back in windows but cant remember the name. Do yo know a program that will do this for me?
View 6 Replies
View Related
Nov 8, 2010
Did an upgrade from 10.04 to 10.10 and it was very smooth. One minor issue is now when I close my laptops lid (Sony Vaio) it does not sleep it just shuts downs. Same with habernate. It just shuts down all together. Then when I boot I get a brief error message to fast to read and the old 10.04 password screen rather than the new 10.10. This does not happen when I just shut down from inside Gnome and this never happened in 10.04. I am using generic video settings and all else works a charm.
View 7 Replies
View Related
Jan 8, 2011
I had screwed up a unsolvable Ubuntu install, so I had to reformat and reinstall. I did all that, installed my apps, but then saw and was convinced to upgrade to 10.10. It took forever, but it downloaded and installed the upgrade package. Since then, I have had a few issues that I had never had in 10.04. The other ones are in their own threads though. So, now when I either close my laptop lid or hit suspend, I can see it do some things, then either A. It goes to sleep. Or B. It just freezes.
No HDD activity, just those messages it displayed for suspending like it does when it works. I have screenshots attached of that. Also, in the default applet that provides you with the sleep option and shut-down, etc, sometimes the option Hibernate disapears. Now, I have seen how the menu is without it and like it that way. I think I need to be looking for a prefrence file for it, because I would like the option Hibernate to be removed from that menu.
1. How can I get the machine to go to sleep properly? This is mainly because I hate loosing what I am doing.
2. How do I remove the option "Hibernate" from Indicator Applet Session 0.4.6?
View 3 Replies
View Related
May 24, 2010
I'm running a fresh 10.04 x86-64 on a thinkpad w500, using the default video driver. The monitor shuts off randomly, sometimes while I'm using it and requires me to trigger sleep mode and waking up to bring back the screen. When it shuts off, everything else seems to be running. (i.e. its not going to sleep) I've turned off screensaver, sleep, hibernation and installed the Caffeine util to no avail.
pm-suspend.log: http://pastebin.org/273444
pm-powersave.log: http://pastebin.org/273445
View 3 Replies
View Related
Jan 21, 2011
Running Ubuntu 11.04 on a Gateway LT3103U netbook. It's running fine except for that fact that when it goes to sleep (timeout or lid closed) or going into suspend or otherwise restarted/shutdown, my router restarts. It's a DLink DIR-655 that has been working fine until I changed this netbook to Ubuntu.After installing Ubuntu on the netbook, it found my SSID being broadcast and I added the connection by supplying the WPA2 password. I have full network access (local and internet).
It's just the router restarts and all my other machines lose connections. The router is using DHCP but supplying IPs based on MAC. Netbook is set to use DHCP.
View 3 Replies
View Related
Apr 11, 2011
I have a HP laptop with an internal tv-tuner card, which i use once in a while, because i don't have a tv. The problem is, that the kernel module i installed to make this piece of hardware work, for some reason makes my laptop unable to sleep. So if i want to suspend my pc, i have to first unload the module, using
[code]...
View 10 Replies
View Related
Apr 24, 2011
My laptop won't wake from sleep. I hit the powerbutton and it'll blink a few more times, turn green and the keys will light up but the screen stays black.
Running sony vaio s with windows 7 and 11.4 duelboot. I really need it to be able to suspend and wake because I'll be taking it to college in the fall.
View 9 Replies
View Related
Sep 15, 2015
I am using a old laptop as a server now and its running great! I would like to disable sleep/hibernation when I close the lid (i would prefer the screen still shut off if possible) ...
This has to be done via command line because I don't use a gui ...
View 3 Replies
View Related
Aug 3, 2010
Installed openSUSE into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.
Reopening the lid and will see a screensaver password screen immediately.
Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?
This also happens with Debian that this laptop is dual booted with.
View 1 Replies
View Related
Oct 19, 2010
I have an old Acer laptop that I am trying to use as a server for Vortexbox (Fedora distro that turns computer into a media server for use with DLNAh Squeezeboxes).Randomly the laptop will go into standby mode and I cannot figure out why. It's very annoying since when the laptop goes to standby the server goes down and all my boxes disconnect. Everything reconnects when I simply press a key on the laptop and it wakes up and the screen turns back on.Here's what I've tried:I've tried checking the BIOS for power management settings and there are none.
I think my CMOS battery is fried since the time keeps drifting. I tried to replace it but could not get to the battery (either through the keyboard or the back of the laptop) so I put in a cron.hourly script that would fix the time every hour and it's keeping things on point in terms of the time but the sleep issues are still there (of note the script does not run when the laptop is sleeping). This is my first script eveo I'm a big newbie...The laptop battery is nonfunctional (I leave it plugged in all the time anyway). Not sure if that has anything to do with it.I installed FreeNX and NoMachine for remote desktop to Gnome. When I have a remote desktop session open on another computer it SEEMS to last longer between sleeping.I tried reading about ACPI and sleepstates and I'm totally lost. I downloaded some thing called ACPItool and ran it to get the following output:
[vortexbox.localdomain ~]# acpitool -e
Kernel version : 2.6.30.10-105.220090320 - ACPI version : 20090320
Battery #1 : present
[code]...
View 3 Replies
View Related
Apr 18, 2016
Note: I use debian testing.GUI very frequently completely breaks for me, it looks like this:URL....It usually happens after a short freeze or after going back to GUI from TTY (which doesn't display because of a known Nvidia proprietary driver issue).And sometimes my laptop goes into sleep state by itself while it's being used. This is lenovo ideapad z510 laptop, with intel+nvidia GPU (nvidia Optimus). To use nvidia GPU I use bumblebee.
View 2 Replies
View Related
Aug 2, 2010
Installed Squeeze into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.Reopening the lid and will see a screensaver password screen immediately.Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?[Solved]Managed to found out what I've done wrongFor KDE users, go to the menu-> Power Management-> Chose the Profile as Powersave
View 1 Replies
View Related
Feb 14, 2016
I have Debian Jessie 8 installed on a Acer 5733 Laptop. After I closed the screen, it goes sleeping, and when I open it, aleatory, it freezes. I don't have graphical interface, and the tty are not accessible. Sometimes, I get access to the computer 10 seconds, and then freeze.I have to shutdown the computer...and lose my work I was doing.I thought it was a X-problem, but the tty don't work too, so it's not ? When I restart the computer, it shows Code: Select allclearing orphaned inode <some inode number.
View 0 Replies
View Related
Feb 3, 2016
I have a strange problem in my new debian 8.3 LXDE install. Every time I boot my laptop it goes in to sleep mode automatically after a min. It is a default install and I have not configured any power management options. How do I find out the reason for the automatic sleep and how can I rectify it?
View 4 Replies
View Related
May 1, 2010
i was recently running the latest xubunto, and decided to upgrade when the upgrade manager offered me however ever since vie upgraded my sound no longer works neither does wine. I have reinstalled wine but nothing has happened but i am at a loss of what to do with the sound. It used to work with no extra configuration before the upgrade i am running a dell inspiron 530.
View 4 Replies
View Related
May 6, 2011
I preface this by saying that all other forms of CDs and DVDs work perfectly in this machine - the problem relates exclusively to Audio CDs, either burnt or bought.
When I put and Audio CD in the drive, the mounting process starts, takes longer than usual, and during this process, the desktop icons flash off then back on again, then the CD mounts and I get an icon on the desktop.
If I right-click and select Open, the desktop icons flash off and on again, and nothing else happens.
If I right-click and select Open with Rhythmbox, the same thing happens - desktop icons flash off and on, and nothing else happens. Rhthymbox is not listed in the active processes either.
If I open Movie Player, and click on Movie in the menu, the Play disc 'Audio disc' option is greyed out.
If Rhythmbox is running, and I insert an Audio CD in the drive, Rhythmbox crashes and won't start again until I remove the Audio CD, then all is well again.
When I select Eject to remove the Audio CD, the desktop icons flash off and on again, then the CD ejects.
View 4 Replies
View Related
Feb 27, 2010
As far as i know VLC is the best media player for linux bc it suppurts all file types. But there is one anoying problem - when i want to listen to song it opens VLC, but when i open another song it opens another new VLC window. And this problemug or whatever didnt apear in Windows version VLC player.
View 4 Replies
View Related
May 3, 2010
I've tried to use Amarok and Rhythymbox, and neither one will play an Audio CD. Rhythymbox will play music files from an external hard drive, but won't play a CD.
View 1 Replies
View Related
May 12, 2010
I am having problems burning audio CDs with Brasero 2.30.0 after my upgrade to 10.04. I was trying to burn a .wav file to CD but Brasero ejects the media without burning anything after transcoding the wav file and creating an image. I'm attaching the error log to aid in debugging.I can burn data CDs fine. My burner, a Samsung SM-308B, can't burn DVDs so I don't know about burning them.
View 9 Replies
View Related
Jul 25, 2010
In 10.04 lucid my SONY CRX 140E drive reads data CDs but does not even read and audio CDs. This was not the case in Hardy and I dual boot and just checked in Windows and audio CDs are no problem there.
View 8 Replies
View Related
May 20, 2010
I upgraded to Lucid a week or two ago. Sound has worked fine, then suddenly, yesterday, I have no sound for any application. The Gnome sound applet shows the volume normally, and have the Mute All option greyed out (not selectable). Nothing stands out as wrong or unusual under sound preferences, and I didn't change anything, although I did recently install a set of updates. There is no physical mute button on this laptop. IT is not account-specific, there are no sound effects even before you log in.
As well, since the upgrade I have intermittently not had the networking icon in the notification area appear, it is covered over by a fragment of some other graphic. It is most usable with the Human these, it is completely unusable with any of the new themes. Anyone know a fix for either of these two issues, especially the first?
Finding Lucid extremely flaky, particularly the signature themes. I like some aspects of it, such as the fact the wireless button on my laptop works now, but overall, not an impressive effort - someone whose first introduction to Ubuntu is Lucid and sees that the notification area doesn't even work correctly is not likely to stick around.
View 4 Replies
View Related
Dec 2, 2010
I just purchased an HP G56-129WM laptop with Windows 7. Audio worked great under Windows. I've removed windows and installed Ubuntu 10.04 and fully patched it. Now my audio doesn't work at all. I don't recall if it worked prior to patching it after the Ubuntu install because I patched it immediately. Does anyone have any insight on getting my audio to work?
View 6 Replies
View Related
May 14, 2010
I am running a 64-bit version of lucid that I just upgraded the other day. At first everything was working fine, but after some upgrades (don't remember which ones) I get an oss4-dkms error and I have no audio.
I have tried a bunch of things that I found online, but nothing has seemed to work and at this time I am a little lost.
Following is some information:
View 7 Replies
View Related
