I just installed Xubuntu on a new computer.One problem i came across, was the volume control at the top panel (near the clock).Unlike Ubuntu's volume control, it just opens up a sound mixer instead of being able to adjust the volume right away with one left-click. Is there anyway to get that to happen? Even my keyboard's volume control doesn't work in Xubuntu, but it worked perfectly fine in Ubuntu.
If i try to add a new applet into the panel, there is ONLY the MIxer, which is not what i want. There are no options to add regular volume controls anywhere that i can just left-click and adjust right away.
*Specs:
Dell Dimension 5280
Intel P4 2.53ghz
256mb RAM
60gb HDD
Xubuntu 10.4 (or the latest)
Generic Keyboard w/volume control
I had to remove Pulse Audio to get my sound working in X-Plane. After installing ALSA, sounds perfect, no complaints. One side effect is that now my Logitech keyboard volume controls don't work, and I no longer have that nifty tray icon. Can I fix this, and install a tray icon for ALSA? Also my Sound link says, "waiting for sound to respond" when clicking System>Preferences>Sound, can I fix/remove this?
I'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
I migrated back from Maverick because I couldn't get Tvtime to work because /dev/mixer is no longer created in 10.10 so no volume control from within tvtime. I'm now back to 10.04. The issue that I'm having is that I have 4 devices that show up as /dev/mixer, /dev/mixer1,/dev/mixer2 and /dev/mixer3. I need to have tvtime use the mixer associated with my soundblaster audigy card.
whenever I reboot, the order of these devices changes. Sometimes the soundblaster is assoaciated with /dev/mixer , sometimes it's /dev/mixer2 etc. Is there a way to ensure that the devices are always in the same place/order? On a related note, sometimes my usb webcam is video1 other times it's video0 , this also causes problems with tvtime. How can I ensure that my system is the same after each boot? I tried dev rules but couldn't get them to work properly.
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update. I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
I'm still battling Linux sound. It just never sounds as good as Windows, and it's starting to piss me off now that I'm running Linux full time and my audio sounds like poop.
1) For audio that was recorded low, max volume in the app and the desktop mixer isn't always enough. I need a way to go beyond the norms. I've tried the Vlc preamp, but it just ends up causing distortion.
2) The sound quality is continually disappointing, and apps either don't have an EQ, or poor quality EQ's
I also don't want to spend 6 months learning how to use the new piece of software. Is there anything you can recommend to give me more volume and possibly a decent EQ, ideally with standard presets (e.g., 'rock, pop, classicl', etc.)?
I have 2 button in the task bar and I don't know why its disapear and how to make it reappear again? The sound mixer button The Sign out button I have already tried by right click/Add to panel but I didn't find these button!
Slackware 12.1 on Acer Aspire 5710 laptop.Intel HDA audio.There used to be a mixer control for microphone (or 'Mic'). A few months ago it vanished. The microphone works, but is at a fixed level and always with annoying playback through the speakers. I cannot change the recording level as there is no mixer control.
I'm using mp3blaster as audio player under my linux Centos Terminal, i'm using Mixers of PCM & PCM2 and i should get the volume up every time my server makes a reboot, so i need to ask how i can set the mixer of PCM & PCM2 to a Volume of 100% or any value i want ?
in the last instalation of slackware(13 and 13.1) when I do login the sound is down, the vol speaker is zero, and I have increase this by alsamixer, kmixer etc.I try the alsaconf, alsactl estore but it back zero(no sound). How a do for it stay in predefined volume
when I upgraded to xubuntu 9.1 I was pleased to find a mixer control sitting in my notification area.well, yesterday I was doing a little "house cleaning" and removing apps I didn't use. I removed Brasero, Listen and Sound Recorder. I use xfBurn, Banshee and Audacity. now I notice today that I am missing the mixer control that I had like so much. still have xfce4-mixer, but all the controls have been reset. and I can't get it to minimize/close to the notification area
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
How-To set the mixer volume level at system startup or login. A funny story that led up to this how-to first...
I made the obvious mistake of leaving my volume level set to nearly maximum. Of course, Ubuntu's default behavior is to restore the mixer to its last known state - a point of much irritation at that moment. This had been a problem in the past as well, and today was the last straw. So, I did some research, for quite some time I might add, and decided to be a good community member and share my findings. It seems that there are all sorts of opinions around the web. The dominant opinion is that a mixer should always be restored to its last known state, that this is all well and good, and why would you ever want it to work any other way. Lots of people suggested that the startup sound be disabled, which was not a terrible solution, but was still a work-around as it means that the next sound bite to be played is the alarming one.
Needless to say, I wanted to find out what I would call the "proper" way to set the mixer level at startup. As my laptop uses PulseAudio, and my office desktop uses ALSA audio, the methods were different. My focus was for PulseAudio as that was the original purpose. I note here that my method for ALSA is less detailed as it is not the default for Ubuntu audio these days. So, if you are using ALSA, you might have to be a little creative to make my ALSA note fit your needs. I have attached 2 files to this post, one for ALSA and one for PulseAudio.
Is there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
I'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
My volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
ALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
I believe I'm using Ubuntu 9.1 (how can I know for sure anyway?) and I use Harman Karman sound sticks that I got from a Mac. I use a Gateway PC and the volume control in the upper right toolbar of the desktop doesn't work. If I want to adjust the volume intensity I go into System > Preferences > Sound > Applications and I adjust the Firefox volume control. Sound comes through the speakers perfectly but I can't adjust volume with the desktop icon.
Booted up in Lucid this morning to find all my volume control has vanished!I cant re-add to the panel, the volume applet isnt there to re-add! If I go to system/preferences/sound I get the error: Waiting for sound system to respond and nothing happens. If I go into command-line and try running gnome-volume-control-applet, I get the error: WARNING **. connection failed, reconnecting.. this goes on without any further resultAnyone got any ideas? the sound is working.. I just have no volume control other than the one on my speakers
I accidentally removed the volume control from the panel (top right). I added it again (Indicator Applet), but now it's not on the far right with the time/date and wifi icons; it's in the middle part of the upper panel. How do I add applets to the far right of the upper panel?
i just plugged in my new speakers and the master volume control has nearly no effect. Its either the same consistent volume unless brought all the way down and at the very end there is some change in the volume right before it becomes muted.
