I'm using mp3blaster as audio player under my linux Centos Terminal, i'm using Mixers of PCM & PCM2 and i should get the volume up every time my server makes a reboot, so i need to ask how i can set the mixer of PCM & PCM2 to a Volume of 100% or any value i want ?
View 9 RepliesI am using Slackware 13.0 quite out of the box, normally I can change volume for every app using alsamixer. As my laptop is a little bit old working in X uses a lot of resources I have been searching for more and more console based apps. With good results until now.
I started using mp3blaster to listen to music. Great app and all. Only problem I have got is that I have difficulty controlling the volume for it. When in alsamixer I can mute the master channel an control Pcm in small increments so that I can speak about control. When using mp3blaster I have got no control whatsoever. Cant mute the vol channel nor can I control the Pcm2 channel in any way.
My questions are: How do I control the volume in mp3blaster? Why do I have Pcm2 instead of Pcm in mp3blaster? What other info would be needed for anyone to push me in the right direction to solve this problem?
I'm still battling Linux sound. It just never sounds as good as Windows, and it's starting to piss me off now that I'm running Linux full time and my audio sounds like poop.
1) For audio that was recorded low, max volume in the app and the desktop mixer isn't always enough. I need a way to go beyond the norms. I've tried the Vlc preamp, but it just ends up causing distortion.
2) The sound quality is continually disappointing, and apps either don't have an EQ, or poor quality EQ's
I also don't want to spend 6 months learning how to use the new piece of software. Is there anything you can recommend to give me more volume and possibly a decent EQ, ideally with standard presets (e.g., 'rock, pop, classicl', etc.)?
I just installed Xubuntu on a new computer.One problem i came across, was the volume control at the top panel (near the clock).Unlike Ubuntu's volume control, it just opens up a sound mixer instead of being able to adjust the volume right away with one left-click. Is there anyway to get that to happen? Even my keyboard's volume control doesn't work in Xubuntu, but it worked perfectly fine in Ubuntu.
If i try to add a new applet into the panel, there is ONLY the MIxer, which is not what i want. There are no options to add regular volume controls anywhere that i can just left-click and adjust right away.
*Specs:
Dell Dimension 5280
Intel P4 2.53ghz
256mb RAM
60gb HDD
Xubuntu 10.4 (or the latest)
Generic Keyboard w/volume control
in the last instalation of slackware(13 and 13.1) when I do login the sound is down, the vol speaker is zero, and I have increase this by alsamixer, kmixer etc.I try the alsaconf, alsactl estore but it back zero(no sound). How a do for it stay in predefined volume
View 1 Replies View RelatedI have 2 button in the task bar and I don't know why its disapear and how to make it reappear again? The sound mixer button The Sign out button I have already tried by right click/Add to panel but I didn't find these button!
View 4 Replies View RelatedI have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies View RelatedHow-To set the mixer volume level at system startup or login. A funny story that led up to this how-to first...
I made the obvious mistake of leaving my volume level set to nearly maximum. Of course, Ubuntu's default behavior is to restore the mixer to its last known state - a point of much irritation at that moment. This had been a problem in the past as well, and today was the last straw. So, I did some research, for quite some time I might add, and decided to be a good community member and share my findings. It seems that there are all sorts of opinions around the web. The dominant opinion is that a mixer should always be restored to its last known state, that this is all well and good, and why would you ever want it to work any other way. Lots of people suggested that the startup sound be disabled, which was not a terrible solution, but was still a work-around as it means that the next sound bite to be played is the alarming one.
Needless to say, I wanted to find out what I would call the "proper" way to set the mixer level at startup. As my laptop uses PulseAudio, and my office desktop uses ALSA audio, the methods were different. My focus was for PulseAudio as that was the original purpose. I note here that my method for ALSA is less detailed as it is not the default for Ubuntu audio these days. So, if you are using ALSA, you might have to be a little creative to make my ALSA note fit your needs. I have attached 2 files to this post, one for ALSA and one for PulseAudio.
ALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies View RelatedI'm using Mate on Jessie. The problem is that mate-volume-control kinda sucks as an audio control. It doesn't have nearly enough options for a proper volume control program. Pulse is much better for my needs. It or Alsa. Is it possible to remove mate-volume-control, or at least make Pulse the default volume control?
View 5 Replies View RelatedHow do I get mixer and dsp to appear in /dev? I can't use Lavrec without disabling audio.
View 1 Replies View RelatedI migrated back from Maverick because I couldn't get Tvtime to work because /dev/mixer is no longer created in 10.10 so no volume control from within tvtime. I'm now back to 10.04. The issue that I'm having is that I have 4 devices that show up as /dev/mixer, /dev/mixer1,/dev/mixer2 and /dev/mixer3. I need to have tvtime use the mixer associated with my soundblaster audigy card.
whenever I reboot, the order of these devices changes. Sometimes the soundblaster is assoaciated with /dev/mixer , sometimes it's /dev/mixer2 etc. Is there a way to ensure that the devices are always in the same place/order? On a related note, sometimes my usb webcam is video1 other times it's video0 , this also causes problems with tvtime. How can I ensure that my system is the same after each boot? I tried dev rules but couldn't get them to work properly.
I have a problem with mp3blaster.
I want cron to act as an alarm clock: first, it plays an mp3 file and then it runs the speech synthesizer festival which tells me to get up and do stuff.
Now, mp3blaster doesn't do anything when I run it from cron, but festival works without problems.
I've found some possible causes for mp3blaster not working through cron. Someone suggested that pulseaudio is not started. This shouldn't be the problem for me, since I don't even have pulseaudio installed, and festival is playing sound without problems...
I don't know what I should do to make it work.
Here is my script - runalarm.sh:
Code:
I don't want to include the wakeup text here since it contains profanity.
The mp3 player could be another one too. mp3blaster happens to be the only player I know that is easy to run from console, like this "mp3blaster goodsong.mp3", without and playlist creation or other stuff like that.
I can run the runalarm.sh from SSH console and it works fine, the mp3 starts playing and festival speaks after that. When run from cron, festival starts speaking right away and no mp3 is heard.
There was a thread about this but no solution came about. mp3blaster always gives me the error Failed to open sound device whenever I try to play a song, and I'm not sure how to fix that.
View 2 Replies View Relatedis there any program to see video without X as mp3blaster to listen music without X?
View 4 Replies View RelatedI just had the idea of going back to command line music players and mp3blaster is what that came to my mind. I am running Kubuntu 10.10 on a Thinkpad T43 laptop with the default kernel. In an archived thread I read
mp3blaster -s /dev/dsp
would do the trick. But since all sound devices in my current laptop seem to be listed under /dev/snd as pcmC0D0p etc. I tried using,
mp3blaster -s /dev/snd/pcmC0D0p
and this gave a sound device control error.
Just did some digging around and saw that I didn't have any oss modules running. Are they the culprits? If not how would I make mp3blaster use my current devices else do I need to reconfigure my kernel to have the oss modules?
I'm running squeeze (last updated today), and everything has been working great. There is only thing that would simplify my life minutely..Anybody know how can I have the volume buttons on my laptop change the "pcm" channel volume rather than "master"? If they could control pcm, then I could adjust the volume coming out of my headphones or my computer speaker (both controlled by pcm, but not master...seems strange to me) with just one click.I tried to find this info online, but all results seem to refer to an older version. The simple "click here, set this" solution no longer is possible.
View 2 Replies View RelatedDebian Squeeze 6.0.0 on a Thinkpad T43, sound volume is not synchronized between the laptop volume buttons and GNOME's Volume Applet. So if I turn the volume all the way down with the physical buttons, the volume applet may still indicate 75%.I did not have this problem in Debian Lenny. Pressing the volume buttons used to show a volume bar on the screen, as did pressing the mute button.
View 8 Replies View RelatedIs there a way to default volume to 100% in the terminal with gnome-volume-control-applet or any other program? I am setting up a dedicated Zsnes machine which boots into Fluxbox but the volume is muted by default. There isn't a man page for gnome-volume-control-applet.
When I log into Gnome the volume is set to 100%, but Fluxbox is always set to mute.
I've got my xubuntu 10.10 install just about perfect on a little acer aspire d250, apart from a small sound useability issue: In the interests of simplicity and resource usage I removed pulseaudio. After a bit of fiddling I got it so that my USB soundcard (ProDac) is recognized and automatically set as the default soundcard when plugged in. Any sound applications automatically use the USB sound if it present, no need to around with pulse. The only problem is that my netbook's volume control keys still only control the master volume of the inbuilt soundcard, and have no effect on the usb sound. Does anyone know of a way to change which sound device these keys actually effect? I'd like to write a little script so that when the usb device is detected the keys are remapped.
View 1 Replies View RelatedI'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
I used Ubuntu 10.10 (64 bit) on IMac i7. As far as, I remember, after installing Pulse-Audio Equalizer, for each restart of the system, after login screen, system sets volume to maximum value. What can I do?
View 1 Replies View Relatedsince using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
I don't know much about lvm and I've managed to screw up a drive. I had a 500GB drive with FC14 on it and I wanted to copy over a load of data to my new 1TB that was replacing it. I set up my new install the same way as the old...including the same volume names (error number 1 I think) I successfully mounted the old/500GB drive (using vgscan and vgchange -a y etc.) using a laptop (running FC13) and an external hdd cradle. I could access the files I wanted but this wasn't the machine I wanted to copy them to (I was doing this while waiting for the install to finish on the new drive).
When I tried the same process on the new install I found that having two lvm with the same name meant I couldn't mount the external one. So I opened the disk utility (palimsest) and was going to change the name of the old volume group but it wouldn't let me do that. I then thought maybe I could get away with just changing the name of the partition where the files were and maybe I could add it to the mounted group or something so I changed it to lv_home2. This changed the name of my new/1TB lv_home to lv_home2 as well. So thinking that wasn't the answer I just changed the name of the new lv_home2 back to lv_home.
From that point on I haven't been able to see the old drives partitions (the new volume group still works so far). I has a physical volume but the volume group and volume names are gone from view. When I try to vgscan on my main computer or the laptop I had it working on earlier I get:
[Code]....
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies View RelatedI'm using 10.04 now and it runs ok, except one strange thing in the Volume control applet. Sometimes, when I click on the volume slider, it moves up. Even if I try to slide it down, it moves up on every click. The same when I click left of it - it keeps moving up! This is very annoying at night when the music gets loud and wakes everybody. It happens with or without Compiz turned on
View 3 Replies View RelatedI am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies View RelatedMy volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
In Intrepid Ibex, I was using the left Super key as Volume Down and the right Super key as Volume Up, because it was just so convenient.
However when I go to the "Keyboard Shortcuts" window in Karmic, it doesn't let me assign the Super keys to anything. I mean like, I can use the Super Keys along with other keys, but not by themselves.
Is it somehow possible to use the Super keys for Volume Up and Volume Down in Karmic?
It seems that when I adjust the volume with the volume wheel on the side of my notebook, the OS messes up. Nothing is clickable, I cannot type anything, in order to get a working computer again I have to hard reset it.Why is this happening? I have never experienced this. I have a Toshiba Satellite that I recently installed Ubuntu on.
View 5 Replies View Related