I had to remove Pulse Audio to get my sound working in X-Plane. After installing ALSA, sounds perfect, no complaints. One side effect is that now my Logitech keyboard volume controls don't work, and I no longer have that nifty tray icon. Can I fix this, and install a tray icon for ALSA? Also my Sound link says, "waiting for sound to respond" when clicking System>Preferences>Sound, can I fix/remove this?
View 4 Replies
Because of a horrible problem (volume bursting, this is known bug), I completely removed Pulseaudio and some related packages. So I'm now using pure ALSA, and it's working fine. Yet, the volume control tray icon was disappeared. How can I recover it?
View 9 Replies View RelatedI'm running Kubuntu 10.10 32 bit on an old DFI KT600AL motherboard based system using the onboard VIA 3058 AC97 audio (because it supports front panel audio connections and none of the add-in PCI soundcards I have do). I have an old Gateway/STB TVPCI TV tuner card (mainly wanted the FM radio part to work) hooked up to the cd audio connector on the motherboard because the digital audio over the pci bus apparently isn't supported for this card (neither is the onboard analog mixer on the tv tuner card, I had to hack a CD-ROM audio cable and solder it to the audio outputs of the tv tuner module on the TV tuner card). When I use the master channel as the master channel (selected in Kmix) then as one would expect it affects the output volume of all other audio playing on the system except that which is being handled by the PCM channel. On Windows the PCM channel was also affected by the "Volume Control" slider such that ALL volume levels were reduced when moving the slider. I'm hoping someone can help me figure out how to make it work like this on Kubuntu.
First off I should warn you that I (like many users of older hardware that is not properly supported under PulseAudio) have uninstalled PulseAudio (because it's garbage) and am using Alsa to manage my audio hardware. I would think that there would be some way to do this using the 'amixer' application to add the PCM channel as a component of the 'Master' channel so that when the volume is turned down using the 'Master' channel control it will affect the PCM channel too (at least the output to the speaker jack, not necessarily the capture or mix volume though), but I'm not really any good at doing things from a terminal window and the options for the amixer command kind of confused me.
The volume control in the Gnome panel system tray has disappeared from my wife's Ubuntu 10.04 system with the master volume set to zero.I was able to restore sound via System->Preferences->Sound master volume, but this is not particularly convienent. How do I restore the panel volume control? (the speaker icon on the panel, between the Network arrows and Chat/Mail setup icons).
View 3 Replies View RelatedMy internal mic on sony vaio was not working on karmic 64bit. After I followed these instructions [URL] (updated alsa to 1.0.22) I got the microphone working, but now mplayer does not play any sound (although it plays files), as it tries to use pulse by default. However when run with -ao alsa, it works fine.
Other than that, the volume control has not effect on the sound, so every time I need to control it using alsamix.
When I remove pulseaudio, everything seems to be working, except gnome-volume-control and gnome-volume-control-applet do not start, and the keyboard volume controls dont work.
Here are the sound cards I have:
Code:
progre55@progre55:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
[Code]....
I just installed Xubuntu on a new computer.One problem i came across, was the volume control at the top panel (near the clock).Unlike Ubuntu's volume control, it just opens up a sound mixer instead of being able to adjust the volume right away with one left-click. Is there anyway to get that to happen? Even my keyboard's volume control doesn't work in Xubuntu, but it worked perfectly fine in Ubuntu.
If i try to add a new applet into the panel, there is ONLY the MIxer, which is not what i want. There are no options to add regular volume controls anywhere that i can just left-click and adjust right away.
*Specs:
Dell Dimension 5280
Intel P4 2.53ghz
256mb RAM
60gb HDD
Xubuntu 10.4 (or the latest)
Generic Keyboard w/volume control
I have 5.1-speaker set, confed succesfully with alsa. alsamixer -c 0 -command shows volume of all the speakers I want to set up. My problem is, when I have alsamixer open and change main volume from gnome-panel (it's called pavucontrol for me, pulseaudio?) it "resets" all speakers to max (100%). Only master volume changes like planned. For example, if I have front speakers set to 50%, center to 75%, surround to 100%, subwoofer to 40%, when changing volume from gnome's panel it only changes master volume, and puts every other speaker to max. How to prevent this? Do you have any clue? I had not any problems with this in openSUSE 11.1. Alt+F2 not working with Emerald decorator Screens go black after 10 minutes or so in openSUSE 11.2
View 5 Replies View RelatedI am annoyed with the pop up of volume control notification on GUI of my Ubuntu 10.10 ,The volume slide bar moves automatically.Its flickering on my screen and hinders my work.I wonder why ,I am new to Ubuntu ,how to put off this notification I tried
sudo mv /usr/share/dbus-1/services/org.freedesktop.Notifications.service /usr/share/dbus-1/services/org.freedesktop.Notifications.service.disabled
but the notification icon is gone but a small volume control frame appeared from now-where giving the same frustration.( I have installed Ubuntu10.10 on HP Pavilion dv5-1015nr laptop un-installing the preloaded windows)
I'm not able to hear any sounds from my system. The panel does not have the volume control button anymore. I'm not able to run System -> Preferences -> Sound. I get an error saying "Waiting for sound system to respond" And if I run 'pavucontrol' in the terminal, I get "Connection failed: Connection refused"
Also recently I've noticed that when I run some commands in the terminal I often get this message "Home directory /root not ours." Can this be related to the sound problem? I am on the system as root.
I seem to have lost the volume control from the system tray how to I add it back. It's no tin add to panel section.
View 9 Replies View RelatedOn my Fedora 14 system, the gnome-volume-control-applet manipulates the Front channel, rather than Master (or PCM), which means I continually have to use alsamixer in terminal to adjust the audio volume in the other channels.In earlier version of Gnome (pre-pulseaudio?), this could be configured in the volume control preferences, but no more.Anyone know how I can fix this?My audio adapter is pretty standard Intel stuff. lspci: ode:00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
View 1 Replies View RelatedI accidentally removed the volume control icon on the top panel of my desktop. How do I get it back. I'm on 10.04 if that matters.
View 5 Replies View RelatedI was having some problems with audio and java #post10609906), so I uninstalled pulseaudio, which removed the volume control icon from the notification area. However, even after reinstalling pulseaudio and ubuntu-desktop(which got removed), the sound control isn't there, although the internet connection icon in the notification area is still thereNote: Another thread said that adding notification area to the panel would restore it. I've tried that, but it only shows the internet icon and not the volume control.
View 4 Replies View Relatedmy issue is as my Title "Lost Top Sound Icon & Can't control volume with Keyboard" OS: Ubutnu 9.10 x64 - Karmic Koala Lost the Top Panel Sound Icon, I even go to: System > Preferences > Sound Message Pops Up: Waiting for sound system to respond
Funny thing I do get Ubuntu OS Audio sounds Now as well I lost control of my Volume with my Keyboard, pretty sure it has to do with the same Sound icon in the Top panel that is missing The only way I can control Audio is Manually using: gnome-alsamixer 0.9.7
It sucks big time, because I can't control my Audio when ever I need to mute it or upper/lower it through my keyboard fastly when needed. having to manually opening an application to be able to change/control the Audio volume is a huge hassle for me
[Code]...
Is it possible to remove evolution notification icon and stay only with volume control?I appreciate the effort made to integrate everything in 10.04, but it is not a really nice feature to me, since i do not like empathy and i hate evolution. I think ubuntu should put more effort in freedom and less effort in making people all obliged to use the same apps.
View 4 Replies View RelatedThis has been bugging me for a few weeks now all of a sudden i lost my email icon chat etc and the volume icon in the top notification area.
i have tried deleting and re adding the notification area back but they are still missing.
also sometime when i boot up i loose my minimize and close window icons on the windows???
not sure if this connected i am running Ubuntu 10.04 on a dell vostro 200
since using 10.04 I have a big problem with my usb headset (freetalk everyman)
1. Problem: I cannot regulate the volume of the phones (output) anymore with gnome-volume-control. By default the volume is set to 100% which is way too loud. When I set it under 100% there is no sound at all. Values over 100% work.
2. Problem: The X server is freezing iregulary when I connect the headset and disconnect it, Magic SysRq works. I checked Xorg.0.log and found out that it recognizes the usb headset as keyboard:
[Code]...
I am struggling with a problem with the volume control... when i try to adjust the volume with the sliding bar i can not do it. If i put the scrollbar to the 0 position, it is muted. when i move it to anywhere else, i get the full volume. From other programs like vlc, i can adjust the volume with no problem.
View 2 Replies View RelatedMy volume control seems to have only three settings: TOO LOUD, VERY QUIET, OFF. If I adjust the Master volume slider from the Panel, only about the right 1/8th has any effect and if I slide it past about the 95% mark, I get no sound at all. At the far-right end of the volume control, I get total volume. It's basically like the slider only has any impact in the top 5% of it's space. Below 95% of the slide, there is zero volume.
It's so drastic, that one tap down of the volume button on my keyboard kills the sound (because it nudges the slider past that 95% mark). This happens in the Audio settings, etc., system-wide. If I adjust the volume for an individual app from within the app (MPlayer, for example) it behaves exactly as expected (that is, app volume works smoothly, it's just master volume that has this issue). I have run through most of the "obvious" things-- I'm wondering if I broke something by installing the extra KDE packages to get Amarok to work.
I have a multi-platform QT4 application and I'm trying to make it run on Debian 7.x. In this app I'm creating 2 QSystemTrayIcon 's and when I run this application on Debian 7.8 with Gnome 3 disabled both tray icons show up nicely in the notification area in the top-right panel. However when I have Gnome 3 enabled nothing shows up in the top-right panel and the tray icon shows up in the (hidden) bottom panel, but the problem is only the first one of my 2 tray icons shows up - the other one is lost.
I'd like to ask, whether it is by design so, that on Gnome 3+Debian 7.8 there can be only one tray icon per application? Or is it some issue with Qt? I tried also Ubuntu 14.04 with Gnome 3 and there both tray icons showed up nicely in the top-right panel.
There doesn`t seem to be a tray icon for Rhythmbox. The only way to minimize it seems to be to the taskbar. I have used Rhythmbox. I am using a fully updated Debian Testing with Rhythmbox 0.12.3.
View 9 Replies View RelatedWell, I had recently removed every single file regarding banshee, and when I reinstalled it, the tray icon turned into this (I pressume I removed the tray icon as well and it didn't "return after" reinstalling banshee): How can I fix this and bring the tray icon back? I've tried reinstalling it, even installing newer (sometimes unstable) versions, and it didn't work.
View 3 Replies View RelatedVolume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
i have a problem with both spotify and teamviewer. Both of them work just fine but when i close the main window they keep going in background (as they should) but, not showing any tray icon, if i want to close them i have to manually kill them in a terminal. For teamviewer there's an option to choose to completely close the program by closing the windows but i would like to have the possibility of having the app working in background with a tray icon!!!
Spotify gave me the same problem but i read on spotify community that is a bug of the current version. Still i'd like to solve the problem with teamviewer.I had a similar problem with skype and i solved getting a plugin from https://extensions.gnome.org/ but for teamviewer i don't see anything similar...
debian 8.2 jessie
asus n53jl
kernel 3.16.0-4-amd64
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies View RelatedSomeone on the forums had me uninstall pulseaudio to get pSX working, and now I don't have a volume control icon on the panel and when choosing to add stuff to the panel it isn't available.I re-installed pulseaudio through the package manager, but I have a feeling it didn't install everything that uninstalled with it.
View 9 Replies View RelatedALSA mixer resets my speaker volume to zero and changes my USB headset volume to a very low level. How can I get ALSA Mixer to remember my volume settings from last boot or if there's no other option, a way I can make it adjust the levels to a predetermined level automatically on startup. I'm using 10.10 with pulseaudio.
View 3 Replies View RelatedEvery time I boot into my laptop, there is no sound. Going to alsamixer in a terminal shows that the "Speaker" volume is constantly getting reset to 0, and bringing it back up fixes the problem. How can I get Alsa to remember to keep the speaker volume above 0?
View 3 Replies View RelatedI'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
View 3 Replies View RelatedIt always shows a same icon, for every application which shows message tray icon. I just did some shell extension work after fresh installation of F15, nothing related on message tray. Don't know how to change it back.Dose anyone knows how to customize message tray icon for gnome-shell?
View 2 Replies View Related
