I'm extreemly new to Ubuntu and installed 10.04 onto a partition this morning. When I boot up my PC a menu called GRUB comes up and the list of OS's has ubuntu 1st. If I dont change my selection to vista it automatically boots into ubuntu. How can I change the order or default booting OS? I have seen other people talk about it but I'm not sure if it's up to date.
View 2 RepliesI currently have both Ubuntu 9.10 and Vista installed, and would like the Grub to boot to Windows as default selection. Unfortunately, I did not remember which OS I installed in the first place, and even could not find the menu.lst either.
View 2 Replies View RelatedI tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
I just got to finish installing ubuntu lastest version on my new netbook, im really exited about how powerful it can get. The thing is, I'm still keeping my old Windows 7 partition and data, and I want to access it faster, editing the grub options, to change the timer on it, and the default booting option.
View 6 Replies View RelatedI can only get so far and then I find myself staring at the menu.lst (/boot/grub) in gedit. It looks nothing like the menu.lst in Linux Mint 7 and I know that tampering with the menu.lst could spell disaster. So how do I go about changing my default OS to Vista? I have been tinkering with distros for quite some time now but still not a pro.Take a look at what I got below.
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,1)
# kernel /vmlinuz-version ro root=/dev/mapper/vg_localhost-lv_root
# initrd /initrd-[generic-]version.img
# boot=/dev/sda
default=0
timeout=5
splashimage=(hd0,1)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.31.6-162.fc12.i686)
root (hd0,1)
kernel /vmlinuz-2.6.31.6-162.fc12.i686 ro root=/dev/mapper/vg_localhost-lv_root noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /initramfs-2.6.31.6-162.fc12.i686.img
title Fedora (2.6.31.5-127.fc12.i686)
root (hd0,1)
kernel /vmlinuz-2.6.31.5-127.fc12.i686 ro root=/dev/mapper/vg_localhost-lv_root noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /initramfs-2.6.31.5-127.fc12.i686.img
title Windows Vista
rootnoverify (hd0,0)
chainloader +1
I have been trying to edit grub to make windows vista the default but whne i got to the menu.lst it is blank. I use this from the official guide gksudo gedit /boot/grub/menu.lst and it still comes up blank as well as sudo gedit /boot/grub/menu.lst
View 2 Replies View RelatedI've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedI've previously had a dual boot Vista/Ubuntu machine that was working fine. Fast forward, I'm not able to boot into Vista at all and decide to reformat, return to factory settings after which I'll simply reinstall Ubuntu to get my functioning dual-boot back. I reformat the drive, everything seems to work fine and when I reboot I'm met by the GRUB screen rather then the Vista bootloader screen I expected. I select the Vista option and rather than starting to boot, seeing the Windows splash and then breaking (as it's been doing for a few weeks leading up to my decision to reformat), I'm promptly given a message that it can't find the disk 5252-ACFA (that Vista was previously on). After further inspection, my Ubuntu partition is still in tact and untouched, so I think the 'reformat' simply reformatted the Vista partition not the entire HD as I'd wanted. How do I modify GRUB to point to the new correct Vista boot?
View 4 Replies View RelatedI recently installed Karmic, and want to change the default Grub entry to Windows XP. Having done some research and tried things out, I am a bit confused. I have edited etc/default/grub so that it has GRUB_DEFAULT=6 (to correspond to my XP installation) and GRUB_TIMEOUT="3", but after running sudo grub-mkconfig the grub.cfg file still says set default="0".
View 9 Replies View RelatedI just installed kubuntu 910 via cd iso. now i want to change the default grub timeout. It says i dont have permission to edit etc / default /grub so what do i do? i dont know how to login as root user.
View 7 Replies View RelatedI have Lucid on my laptop. Unfortunately, with the various 2.6.32 kernels neither hibernate nor suspend work, so I've installed and use the last 2.6.31 kernel that came with Karmic.Now, I'd like to set it as default, so that I don't need to actively choose it when I boot. The problem is that I can't find a way to set Grub (version 2.0, or 1.96rc, can't remember) to pick the 2.6.31 kernel and if I try to uninstall the 2.6.32-23 kernel synaptic says that linux-generic and linux-headers will also be uninstalled (not just the parts specific to 2.6.32-23).
View 2 Replies View RelatedI use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1.
Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE.
I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and W7?
Code: parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
Here the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies View Relatedupgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
Here is the output of bootscript,
Code:
#
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
#
[code].....
I'm somewhat of a n00b. I have a dual boot machine running XP and Fedora Core 14. I like my default boot always to be XP. Right now, XP is default BUT every time there is an update to Fedora, it will change the default to Fedora. I now have to edit grub.conf to boot from xp again. Is there a way to make xp always as the default even after an update?
View 2 Replies View RelatedAlthought /etc/default/grub has GRUB_DEFAULT=6, after grub-update nothing changes and the default menu entry is still the first. Can someone tell me how to change the Grub default menu entry?
View 6 Replies View RelatedI have just installed Ubuntu 9.10 on a laptop previously running 8.10
I am unable to change the default OS in Grub from Ubuntu 9.10 as I cannot find /boot/grub/menu.lst.
How do you change the default OS in this newer version of Grub.
I will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
View 7 Replies View RelatedI use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1. Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE. I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and Win7?
Code:
parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
I recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says:
"Windows cannot start. A recent upgrade or hardware change may have caused this".
And below that:
File: \boot\bcd
Status: 0xc000000e
info: An error occurred while attempting to read the boot configuration data"
When I run sudo fdisk -l, I get the following:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000080
Device Boot Start End Blocks Id System
/dev/sda1 1 6 48163+ de Dell Utility
/dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS
/dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA)
/dev/sda5 19066 19457 3148708+ dd Unknown
/dev/sda6 15937 18930 24049242 83 Linux
/dev/sda7 18931 19065 1084356 82 Linux swap / Solaris
Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.
Yesterday I installed on my laptop (an IBM Thinkpad T42) "virt manager" using the Synaptic Package Manager. I'm running Karmic.
As part of the installation, SPM had me reboot the computer (which is dual-booted with Windows XP, which I use less than 1% of the time). The new GRUB screen came up showing two new initial lines, the first 2 of the following 4 lines:Ubuntu,
Linux 2.6.31-19-generic-pae
Ubuntu, Linux 2.6.31-19-generic-pae (recovery mode)
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
When I allow the default choice of the first line to prevail, Ubuntu boots up into a condition in which the Wireless Network Connection fails to open, and in which nothing I've been able to think of makes it open.
If, instead, I scroll down to the third line (which was the initial default choice line, i.e., the default choice line prior to the "virt manager" installation), Ubuntu boots up into a condition in which the Wireless Network Connection operates as usual, viz., immediately.
Scrolling down works, but it would be better, it seems to me, to return to the condition in which the current line 3 either becomes line 1 or else becomes the default bootup choice.
I've used SPM to uninstall "virt manager", but the 2 new intial lines in the GRUB options remain. I understand that with Karmic's version of GRUB, viz., GRUB-2, it is no longer possible to change the bootup menu choices easily.
how I can either eliminate the first 2 lines in my current GRUB screen, or make line 3 the default choice?
I was dual-booting Vista Business and Fedora 12 on the same hard drive. I deleted the Fedora partition and expanded the Vista partition to use this space.
I figured that because GRUB was on the Fedora partition (at least, I thought it was), I'd just be able to load up Vista as usual.
When I turn the computer on, a GRUB command-line comes up, and to be completely honest, I have absolutely no idea what to do at this point. I'd quite like to just get rid of GRUB entirely and boot straight into Vista, but again, I don't know how.
I've tried using a Vista recovery disc to sort out startup problems, but it doesn't do anything because the problem occurs before control is passed over to Vista.
What can I do to fix this problem? Can I get delete GRUB and boot straight into Vista? How?
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies View RelatedI have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
I'm installing debian squeeze and and I've got 2 hdd (sda,sdb), but I want to install it on sdb. When i get to the "Install the grub boot loader on the hard disk" it automatically installs it on /dev/sda (and I get an error), I want to install it on /dev/sdb... Is it possible.
View 12 Replies View RelatedHow do I change the default OS on grub, and adding more time to make my choice?
View 3 Replies View RelatedThe first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?