I currently have both Ubuntu 9.10 and Vista installed, and would like the Grub to boot to Windows as default selection. Unfortunately, I did not remember which OS I installed in the first place, and even could not find the menu.lst either.
View 2 RepliesI'm extreemly new to Ubuntu and installed 10.04 onto a partition this morning. When I boot up my PC a menu called GRUB comes up and the list of OS's has ubuntu 1st. If I dont change my selection to vista it automatically boots into ubuntu. How can I change the order or default booting OS? I have seen other people talk about it but I'm not sure if it's up to date.
View 2 Replies View RelatedI want to set up grub for a dual boot system of xp and vista. The thing is that I have vista installed and would have to install it ance again after setting up XP in order to use the microsoft bootloader. And secondly I slowly want to get into linux...
This is how I tried it: I have four partitions on my HD and want to install the Bootloader on /dev/sda3. I started up the ubuntu live cd, mounted partition3, opened the console and tried this command line which I found in a tutorial
grub-install --root-directory=/media/hda3 --recheck /dev/hda However I get the following error message:
mkdir: cannot create directory '/media/hda3/boot': No such file or directory
I have been trying to edit grub to make windows vista the default but whne i got to the menu.lst it is blank. I use this from the official guide gksudo gedit /boot/grub/menu.lst and it still comes up blank as well as sudo gedit /boot/grub/menu.lst
View 2 Replies View RelatedI've been using Linux for over a decade, so no need to worry about the obvious. I'm positive that I have my partitions/install correct. What has me baffled is that Fedora 14, which uses GRUB 0.97 (GRUB legacy) - boots Windows flawlessly every single time on the same hardware, but Ubuntu's (or the upstream Debian's) GRUB legacy do not - even though they are based on the same upstream code from the GNU Savannah servers.
No matter what I've tried I cannot get the Debian or Ubuntu version of GRUB/GRUB-legacy to boot any recent Windows 64 beyond XP (Vista or 7). All that it does is resets the computer when Windows attempts to boot, without an error. GRUB is notoriously difficult to compile, so before I try to compile code from RedHat's archives - any thoughts,experiences, similar issues - whatever?
I dual-boot my machine and I want it to default to boot into windows so that whenever I restart the machine remotely from my home it will be able to get back into Windows (instead of Ubuntu).
The problem is that every time Ubuntu upgrades the kernel, I have to reset the default boot item of grub back to windows. This is because the grub menu loader uses positions i.e. 6 for default OS to boot. And when Ubuntu installs a new kernel it changes that order.
I am looking for a way to configure grub to remember its default boot item under kernel updates.
Possible Duplicate:Make grub keep its default boot under kernel updates.I have just installed Linux with my windows 7 pre-installed and i got it working fine. Since i use windows 7 more than linux, i would like to have "Windows 7" option on the top of "Linux" option.
"When i have turn on my computer, the first thing i see is an Option asking me whether i want to use windows 7 or Linux and there's a countdown timer below it which is 10seconds countdown and if i don't select it on time, it will automatically select the first choice which at the moment i've got Linux pre-set as my first choice."
I have Ubuntu 9.10 64 Bit, and I also have Windows 7, and I want to make Win7 boot first and without having to manually choose it every time I restart, for my non-linux using family. I have tried the guides where it says you have to edit the "menu.lfg(or whatever it is)" and I don't have that file. I have looked, it's not there, the closest I found was "grub.cfg" and I can't make any sense out of it. I'm not unfamiliar with computers, I'm just relatively new to Ubuntu, and want to make the best out of it I can, I love it. I've tried going into GRUB, and and editing the Win7 Loader, but it doesn't work.
View 4 Replies View RelatedI recently upgraded to Ubuntu 10.04 from earlier versions. I have a dual boot system with Windows 7. Grub was set to boot Windows by default Things were working fine. I decided to upgrade to Grub2. It seemed like a good idea at the time. Now when booting up,the name at the top of the Grub menu is 1.98, which is Grub 2. When I run grub-install -v, it comes back grub-install (GNU GRUB 0.97) which is not Grub2. Now when I boot up, Ubuntu 10.04 is the default. I have to manually choose Windows if I want to use that system. I have been unable to change the boot order following instructions from this site. Any Way changing the boot order to make Windows 7 the default. I am using a Toshiba Satellite.
View 5 Replies View RelatedI installed Windows XP Pro and RedHat Linux Enterprise 5 on my PC for my purpose. The PC is used by other family members too and they need only Windows OS for browsing. It is becoming problem for them to reboot after the PC enters into Linux by default. I am still learning Linux and I want to edit the /boot/grub.conf file to make Windows as default OS to boot. The following is the content of my grub.conf file (FYI):
#boot=/dev/sda
default=0
timeout=10
splashimage=(hd0,5)/grub/splash.xpm.gz
[code]....
I use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1.
Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE.
I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and W7?
Code: parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
I've previously had a dual boot Vista/Ubuntu machine that was working fine. Fast forward, I'm not able to boot into Vista at all and decide to reformat, return to factory settings after which I'll simply reinstall Ubuntu to get my functioning dual-boot back. I reformat the drive, everything seems to work fine and when I reboot I'm met by the GRUB screen rather then the Vista bootloader screen I expected. I select the Vista option and rather than starting to boot, seeing the Windows splash and then breaking (as it's been doing for a few weeks leading up to my decision to reformat), I'm promptly given a message that it can't find the disk 5252-ACFA (that Vista was previously on). After further inspection, my Ubuntu partition is still in tact and untouched, so I think the 'reformat' simply reformatted the Vista partition not the entire HD as I'd wanted. How do I modify GRUB to point to the new correct Vista boot?
View 4 Replies View RelatedI will be booting Vista, XP, and then installing Linux with grub. So the Vista boot loader will be setup to boot both Windows, so then when I do install a Linux on the same hard drive, (all on separate partitions) what is the best method to boot up all 3 systems?Should I just allow grub to install on the master boot record, and then chainload XP and Vista. Or I could install grub on the boot sector of what will be my Kubuntu root partition, and then try to add this Linux to the Vista boot loader ?
View 7 Replies View RelatedI use CloneZilla to image partitions and Grub 0.97 in the MBR to boot the os restored in /sda1. Although it works fine with XP, I can't get Vista or Windows7 to boot. For instance, Vista fails with error 0xc00000e and is unable to load WINLOAD.EXE. I don't know if it's something in Windows or maybe Grub needs something else besides the following in menu.lst to be able to load Vista and Win7?
Code:
parttype (hd0,0) 0x7
rootnoverify (hd0,0)
makeactive
chainloader +1
I was dual-booting Vista Business and Fedora 12 on the same hard drive. I deleted the Fedora partition and expanded the Vista partition to use this space.
I figured that because GRUB was on the Fedora partition (at least, I thought it was), I'd just be able to load up Vista as usual.
When I turn the computer on, a GRUB command-line comes up, and to be completely honest, I have absolutely no idea what to do at this point. I'd quite like to just get rid of GRUB entirely and boot straight into Vista, but again, I don't know how.
I've tried using a Vista recovery disc to sort out startup problems, but it doesn't do anything because the problem occurs before control is passed over to Vista.
What can I do to fix this problem? Can I get delete GRUB and boot straight into Vista? How?
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies View RelatedHere the other day, I decided to try out 10.04 Alpha. But after I had done it, I weren't able to boot Vista anymore. When I choose it in the grub boot loader, it changes to only showing the word "GRUB", and nothing more happens. As a desperate attempt to fix it, and because I weren't happy using the Alpha, I then decided to switch back to 9.10, but the problem with booting Vista persists.
View 9 Replies View Relatedupgraded from 9.10 to 10.04 beta today.Ubuntu boots but not Vista boot info script info for my system as follows...Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[code]...
Here is the output of bootscript,
Code:
#
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
#
[code].....
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies View RelatedI recently installed Ubuntu (Karmic Koala) on a Dell Inspiron 1525 which already had Vista installed on it. The installation went just fine and I could boot into either Ubuntu or Vista using the Grub bootloader options. After updating grub through the update manager however, I can no longer boot into Vista and get an error message that says:
"Windows cannot start. A recent upgrade or hardware change may have caused this".
And below that:
File: \boot\bcd
Status: 0xc000000e
info: An error occurred while attempting to read the boot configuration data"
When I run sudo fdisk -l, I get the following:
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000080
Device Boot Start End Blocks Id System
/dev/sda1 1 6 48163+ de Dell Utility
/dev/sda2 * 7 13619 109345113+ 7 HPFS/NTFS
Partition 2 does not end on cylinder boundary.
/dev/sda3 13619 15936 18605117+ 7 HPFS/NTFS
/dev/sda4 15937 19457 28282432+ f W95 Ext'd (LBA)
/dev/sda5 19066 19457 3148708+ dd Unknown
/dev/sda6 15937 18930 24049242 83 Linux
/dev/sda7 18931 19065 1084356 82 Linux swap / Solaris
Partition table entries are not in disk order. I have the Vista recovery disk but was wondering whether using it to repair the Vista bootloader might mess up Grub.
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
I dual booted opensuse along with vista. I installed opensuse in extended partition, with grub and gave the option as "boot from extended partition". Now everything is fine. I am able to boot into suse as well as vista. Now how can I restore my vista bootloader? I want to uninstall openSuse. When I try restore mbr from hard disk. There is absolutely no change!
View 1 Replies View RelatedI have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
I tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
I'm trying to configure GRUB to boot XP preferentially- my wife insists. Having looked up the GRUB manual I see that I can set this using the default command.
The problem is, when I go to my grub command line default is not a recognized command. If I hit TAB for a list of commands, it isn't there.
I think I'm using some 0.9x version of GRUB, since the partitions etc seem to be numbered starting at 0, not 1.
While I'm at it, I was just going to play around and figure this out, but: the menu interface lists five versions of Ubuntu (all those weird kernel variations) then XP. So would XP be default 1 or default 5?
I Just updated my 10.04 LTS system, which dual boots Windows XP. Prior to the update the default was to boot to XP, now it is to Memtest.
I tried to edit /etc/default/ grub and make the default be 14 instead of 12, which would be XP, but Ubuntu, (using gedit), refused to accept my change.
I don't have a problem scrolling around to pick XP, or the latest Linux kernel to boot, but my wife sure does. How can I make Ubuntu/Grub default to to XP ?
I had Windows Vista installed on my computer and created a partition to install Fedora 15. I chose the option to install fedora on any free space, so it should have installed on the empty partition. When I boot up, there are two boot options. Fedora and Other. When I select other, it gives an error:BOOTMGR not found.Is there a way to add Windows Vista to the Grub Bootloader by editing the grub menu. I don't know if it will help, but here is what I get when I run fdisk in the terminal:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....