Ubuntu :: VirtualBox 3.1.8 - Virtual Machine Hangs During Boot?
May 13, 2010
I recently installed VirtualBox 3.1.8 r61349 from the deb file virtualbox- .1_3.1.8-61349~Ubuntu~lucid_amd64.deb onto a recent clean install of Lucid Lynx on my HP p6210f (6144 MB RAM, AMD Athlon II X4 620 CPU). I then imported a friend's VM and tried to boot it. The VM consistently hangs with the following showing on the console (this is the last 3 lines, for context):
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
I thought initially it was a problem with my friend's VM, so I decided to create a new VM from scratch, and boot from a CentOS-5.4-i386-DVD instead, which I have done before with previous versions of VirtualBox. When I do that, I'm able to select my installation method (so I know it's booting from the CentOS ISO), and then it hangs at exactly the same point. I couldn't find any other mention of this problem, but it's a pretty recent release of VirtualBox - I think just days old.
The VM: OS Type=RedHat (presumed 32-bit), 1 processor, 1024 MB RAM
View 5 Replies
ADVERTISEMENT
Jul 4, 2010
Every time I try to start a virtual machine in VirtualBox I get this error:
Code:
Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So I run '/etc/init.d/vboxdrv setup' in the terminal as root and I get this:
[Code]...
View 14 Replies
View Related
Feb 19, 2010
after upgrading VirtualBox from 3.0.x to VirtualBox-OSE-3.1.2-1.fc12.x86_64 VBox fails to start any virtual machine with error: Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
When I run
sudo /etc/sysconfig/modules/VirtualBox-OSE.modules
I get
FATAL: Error inserting vboxnetflt (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetflt.ko): Invalid module format
FATAL: Error inserting vboxnetadp (/lib/modules/2.6.31.12-174.2.19.fc12.x86_64/extra/VirtualBox-OSE/vboxnetadp.ko): Invalid module format
Kernel is (obviously) kernel-2.6.31.12-174.2.19.fc12.x86_64, but same thing happens with any installed kernel, IE kernel-rt-2.6.31.12-1.rt20.1.fc12.ccrma.x86_64
I reinstalled VBox and kmods got rebuilt but the problem persists.
View 2 Replies
View Related
Jun 18, 2010
i want to run winxp really bad in virtual machine, but have yet to get the programs to open without error.
View 14 Replies
View Related
Jul 2, 2010
How do I can do to make the virtual machine with virtualbox has more sound?
View 2 Replies
View Related
Mar 10, 2009
Running Fedora 10, I installed CentOS 5 in Virtualbox, but I can't ping the Virtual Machine...
From within CentOS, I can ping my laptop [known as the host?] but from the laptop I can't ping the CentOS Virtual Machine. I tried turning off the firewall on both too... CentOS was able to access the internet through my laptop right away without any configurations too.
Unless someone has an idea to resolve the above, I am also wondering about something else VirtualBox-related:
To see if it was possible to get around the above issue, I was going to install another CentOS virtual machine to see if I can get them to communicate both ways [if at all], but to do so, I think I have to install CentOS AGAIN on another allocated amount of hard disk space. This will take some time, so I was wondering if anyone knew if it was possible to just create a quick duplicate of the previous installation, if you wanted 2 different virtual installations of the same OS.
View 2 Replies
View Related
Jun 28, 2010
My laptop is running Linux Mint 9 and I am trying to install Fedora 13 in a virtual machine within Virtualbox. However, it's not working. It takes forever to get past the initial white/blue loading bar when it first boots and then it just goes white, so I can't see anything. I've already tried modifying the bootline parameter of the live CD to include noprobe, noacpi, noapic, nousb, and nofirewire. However, the result is the same. Am I missing something? Is it possible to install this?
View 1 Replies
View Related
Jul 11, 2011
I created an archlinux vm guest using virtualbox on my windows desktop at work. I'm planning to use it for django development because there are no unix machines available to use as a workstation at work.
From the vm guest I can ping/ssh to other machines in the network, but not the other way around. It's like even though the guest machine has an ip address on the network and a hostname, neither is recognizable.
View 1 Replies
View Related
Apr 8, 2010
I'am using gentoo linux. After some system's updates VirtualBox stoped loading any virtual machine with error:
Code: Failed to open a session for the virtual machine. Virtual machine has terminated unexpectedly during startup.
Details:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Machine
Interface: IMachine {99404f50-dd10-40d3-889b-dd2f79f1e95e} Kernel log
Code:
So, i've rebuilded all VirtualBox dependencies with safe flags, then i've recompiled most of the sys-* packages also with safe flags. However VirtualBox still doesn't work.
UPD: virtualbox-bin-3.1.4
UPD2: 3.1.6 and ose-versions crashes with same errors
View 2 Replies
View Related
Jun 6, 2011
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
View 3 Replies
View Related
Jan 2, 2011
How do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
View 1 Replies
View Related
May 1, 2010
I am planning on playing with the lynx on VirtualBox for a while just to do some test and maybe update my installation notes before moving everything but just can't get it to work.
Environment details:
OS: 9.10
Kernel: 2.6.31-21-generic
Machine: Compaq Presario B1200, 3 GB RAM, 14 GB available disk space
VirtualBox: VirtualBox OSE 3.0.8_OSE r53138
Problem: After starting up the virtual machine and reaching the purple screen (where a keyboard and accessibility icons are displayed at the bottom part), everything just goes black with an un-blinking cursor on the top-right. I already tried recreating the virtual machine, removing and creating a number of times, and I've also tried reinstalling VirtualBox but the problem still persists.
View 4 Replies
View Related
Jun 2, 2011
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies
View Related
Aug 24, 2011
I am installing Fedora 15 as a guest machine on virtual box. the installation completes fine, but it gets hanged on the date and time screen during first boot. Even on clicking "Forward" button it doesn't work and just gets stuck there.
I am using windows 7 as the host machine and I have given 1 GB ram and 8 GB hard disk to guest fedora OS.
Before the installation, I checked the media also it was shown to be correct. The media I am using is virtual clone drive for DVD ISO image. VirtualBox version 4.1.2 was used.
View 7 Replies
View Related
Jun 4, 2010
My laptop boot up time increased considerably (10 seconds) after allocating a virtual drive for virtualbox guest. The guest installation did not work so i removed it along with the virtual disk. Now everytime when i boot to ubuntu, after inputting my password in the login screen, it takes much longer to load the system. And during the loading time the disk activity indicator light blinks indicating the harddisk is actually busy loading the system.
I decided to search around for a possible answer and force reprofiling ureadahead does the trick Now boot time is back to what it used to be
View 3 Replies
View Related
Feb 19, 2010
I have Karmic 64 bit installed, originally with 2GB of memory. The motherboard will take up to 16GB, and I decided to double to 4GB. When I put in the 4 memory sticks (1GB each) and reboot, it gets past grub2, to the ubuntu "circle" symbol, the screen blacks out and that is it. No desktop, no further action that I can tell from the box, just a black screen. The video feed to the monitor, from what I get with the power light is gone and no activity on the drive.
If I take out one of the memory sticks, it boots happily up with 3GB and runs fine. Put the 4th back in, same behavior. I tried swapping out the old memory, putting in the 2 new sticks, everything works fine. Add in the other two (the old ones), the problem shows again. I thought I might be the last memory slot, so I removed the one from the 3rd slot, works fine. All in all, it works fine with 3GB, but hangs on boot with the 4GB.
View 7 Replies
View Related
May 27, 2010
I have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies
View Related
Feb 4, 2010
In order to get the work done I use a Macintosh Macbook Pro (4,1) with a Boot camp partition running Windows 7.This allows me to use my favorite OS (OSX) with my required work environment (Win7 & .Net) when ever I need them.To allow me smooth usage I use Parallels 5 to virtually boot my Win7 machine from within OSX but whenever I want to do some heavy lifting I reboot into Windows 7 (on boot camp) which allows me to use my laptop's entire resources for my work.
My problem is this: I am now about to begin work for a company in Tel Aviv which uses Linux desktops for development and I need to follow suit. So I've given my self a new Quest: Set up the ultimate web development platform. My goal is this-
1. Install the three operating systems one along side the other - OSX, Ubuntu & Windows 7.
2. Set each one of them up in such a way that allows me to boot into it (meaning I can have any one of these OSs running on its own when I want.
3. Use parallels to virtually boot my Win7 partition - this allows me to keep using Office 2007, which I use often.
4. optional! Use parallels to virtually boot the Ubuntu OS also.
I have managed to complete goal 1 & 2.But I simply can't get 3...In theory it isn't a problem to install windows & OSX along side each other and virtually boot the windows under OSX using parallel's bootcamp virtualizer- BUT - the moment I install Linux along side the other two it break's parallel's virtualizer and it can't boot. I think it is due to parallel's in ability to use GRUB but I'm not actually sure about that.
I am considering compromising and going for a system like this:
1. Install OSX and Ubuntu on the laptop - which means I can boot into each of them.
2. Create a virtual machine for Win7 using parallels.
But that will be a real compromise as far as I'm concerned and I hope to find a way to set up the machine as I described earlier (three OSs which can be booted independently and also loaded in VMs).Just to make sure I'm clear - I HAVE MANAGED to install three independent OSs on the same machine - but that always prevents me from booting them as VMs using parallels...
View 2 Replies
View Related
Feb 7, 2010
VMware Fusion
RHEL5 Server
After messing about with a vm I need to go into rescue mode and fix the problem I have tried all settings in the CD/DVD window and cannot get a boot prompt Just goes straight to grub I only used the rescue mode on a 'real' host before and had no problem.
View 1 Replies
View Related
Mar 8, 2011
I have few virtual machines running on one of xen servers & I'm experiencing a problem booting up one of clients "domain".
How can I force this machine to boot up to runlevel 1? I can't see grub menu when first booting it up!
View 6 Replies
View Related
Feb 3, 2010
how to use CTRL-ALT-DELETE on a virtual Windows machine on my Virtual Box?
View 2 Replies
View Related
Jan 3, 2010
I read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies
View Related
Dec 3, 2008
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
View 2 Replies
View Related
Aug 14, 2010
Can I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
View 2 Replies
View Related
Jul 29, 2009
I successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies
View Related
Nov 20, 2010
I'm trying to create a Windows XP VM using VirtuallBox, and creating/formatting the disk goes OK, but when it's actually running setup it hangs only a few minutes in. I'm using VirtuallBox 3.1.10 on Ubuntu 10.04.
View 3 Replies
View Related
Aug 24, 2010
I have installed 'VirtualBox' on my lucid lynx and want to load the Microsoft XP OS. When I start the virtualization I get this message in the VirtualBox terminal---"Fatal: Could not read from the boot medium! System Halted."--- What could be the problem?
View 9 Replies
View Related
Feb 1, 2010
Trying to set up a VPN connection from with Virtual Windows XP (virtualbox) and the network shows verifying user name and password but then times out and give me a message that it could not connect to the serve.
Since I could connect from a Windows system at another location, I assume there is something in Ubuntu that is preventing the connection so I tried to set up a VPN connection in Ubuntu.
I installed "network-manager-pptp" and "pptp-linux" as mentioned in the documentation but when I try to create a VPN connection using [main menu]>[System]>[Preferences]>[network connections] the VPN tab has a padlock on it. I set up the VPN but did not put a DOMAIN name on it because the server does not have a DOMAIN and it did not appear to be necessary on the dedicated Windows machine.
In spite of configuring the VPN connection, I cannot find the connection anywhere so I can see the server at the other end.
When I try to use [main menu]>[places]>[Connect to Server] using [windows share] and enter the IP number of the server, I get the message "Cannot display location smb:// {server IP address}"
And if anyone knows why the Virtual windows cannot connect.
View 1 Replies
View Related
Jan 20, 2010
Few days back I have installed VirtualBox in my ubuntu 9.04. Then in VB I have installed one distro of linux based on ubuntu 8.04 ( BAISHAKHI LINUX). Since then my system ( i.e., host ubuntu 9.04,) started hanging and behaving quiet irregularly. The GUI package manager of my host ubuntu 9.04 does not responding each time I start it from system>administration; rather its gets hanged and I have to use "force quit". I have installed Virtual Box 3.1.
View 1 Replies
View Related
Feb 11, 2010
Hello, im running ubuntu 9.10 on my laptop and im trying to make a win xp vbox and when it gets to the part where is is creating the virtual hard drive (30GB in my case) it just stays at 0%. I left it running last night and went to bed, in the morning it was still at 0%. Now iv just tryd it again and its been sitting for about 2 hours now and still at 0%.
View 2 Replies
View Related
