VMware Fusion
RHEL5 Server
After messing about with a vm I need to go into rescue mode and fix the problem I have tried all settings in the CD/DVD window and cannot get a boot prompt Just goes straight to grub I only used the rescue mode on a 'real' host before and had no problem.
I want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies View RelatedIn order to get the work done I use a Macintosh Macbook Pro (4,1) with a Boot camp partition running Windows 7.This allows me to use my favorite OS (OSX) with my required work environment (Win7 & .Net) when ever I need them.To allow me smooth usage I use Parallels 5 to virtually boot my Win7 machine from within OSX but whenever I want to do some heavy lifting I reboot into Windows 7 (on boot camp) which allows me to use my laptop's entire resources for my work.
My problem is this: I am now about to begin work for a company in Tel Aviv which uses Linux desktops for development and I need to follow suit. So I've given my self a new Quest: Set up the ultimate web development platform. My goal is this-
1. Install the three operating systems one along side the other - OSX, Ubuntu & Windows 7.
2. Set each one of them up in such a way that allows me to boot into it (meaning I can have any one of these OSs running on its own when I want.
3. Use parallels to virtually boot my Win7 partition - this allows me to keep using Office 2007, which I use often.
4. optional! Use parallels to virtually boot the Ubuntu OS also.
I have managed to complete goal 1 & 2.But I simply can't get 3...In theory it isn't a problem to install windows & OSX along side each other and virtually boot the windows under OSX using parallel's bootcamp virtualizer- BUT - the moment I install Linux along side the other two it break's parallel's virtualizer and it can't boot. I think it is due to parallel's in ability to use GRUB but I'm not actually sure about that.
I am considering compromising and going for a system like this:
1. Install OSX and Ubuntu on the laptop - which means I can boot into each of them.
2. Create a virtual machine for Win7 using parallels.
But that will be a real compromise as far as I'm concerned and I hope to find a way to set up the machine as I described earlier (three OSs which can be booted independently and also loaded in VMs).Just to make sure I'm clear - I HAVE MANAGED to install three independent OSs on the same machine - but that always prevents me from booting them as VMs using parallels...
How do I program a virtual machine to auto-start/boot upon boot up of the host system? I am experimenting with SNORT network intrusion detection system and have installed it inside a virtual ubuntu box which I want to start automatically.
View 1 Replies View RelatedI successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View Relatedi have a linux mechine, in that i want to install solaris throug xen virtualization. (solaris content is in CD) while i am doing this there is an option "local install media" in installation method it was not highlighting so i can't install this. then what can i do now.
View 1 Replies View RelatedI have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedI recently installed VirtualBox 3.1.8 r61349 from the deb file virtualbox- .1_3.1.8-61349~Ubuntu~lucid_amd64.deb onto a recent clean install of Lucid Lynx on my HP p6210f (6144 MB RAM, AMD Athlon II X4 620 CPU). I then imported a friend's VM and tried to boot it. The VM consistently hangs with the following showing on the console (this is the last 3 lines, for context):
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
I thought initially it was a problem with my friend's VM, so I decided to create a new VM from scratch, and boot from a CentOS-5.4-i386-DVD instead, which I have done before with previous versions of VirtualBox. When I do that, I'm able to select my installation method (so I know it's booting from the CentOS ISO), and then it hangs at exactly the same point. I couldn't find any other mention of this problem, but it's a pretty recent release of VirtualBox - I think just days old.
The VM: OS Type=RedHat (presumed 32-bit), 1 processor, 1024 MB RAM
I have few virtual machines running on one of xen servers & I'm experiencing a problem booting up one of clients "domain".
How can I force this machine to boot up to runlevel 1? I can't see grub menu when first booting it up!
How to assign virtual ip in RHEL5.4?
View 3 Replies View RelatedCan I copy my virtual box VM windows XP virtual-machine files to another Linux computer and run the machine on that computer while I keep on running it on the original computer?
This question is about technical possibilities, not licences.
how to use CTRL-ALT-DELETE on a virtual Windows machine on my Virtual Box?
View 2 Replies View Relatedhow to make virtual machine using xen.
View 1 Replies View RelatedI read once that you could use VMWare's converter to convert a physical machine into a virtual machine to run in VirtualBox. Can someone point me in the direction of a tutorial or just give me instructions on how to do this? I was very confused by the converter and how to get the image to work with virtualbox.
View 1 Replies View RelatedI have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
I have a main Ubuntu system and a virtual Windows system, set up using QEMU/KVM. So, I can start Windows using virt-manager and connect to it using a VNC client.But what I really want to have is a new Xorg display that is connected to this Windows system, so that e.g. CTRL-ALT-F8 shows Ubuntu, CTRL-ALT-F9 shows Windows. That'd be a real alternative to a Linux/Windows dual-boot setup.
I know that GDM had some option to connect to another X server (XDMCP), but I couldn't get this to work with GDM2/Ubuntu 10.4. Would this somehow also work to connect to a VNC server (like the virtual Windows system)? how to make Xorg provide a display for incoming VNC connections, but nothing on how to do the opposite.
What is the a tried and tested free virtual machine solution like VMware for Linux? I would like to run several different types of OS on a server with an Intel processor?
View 1 Replies View RelatedMy hostmachine is Windows, and install Ubuntu on a virtual machine. I developed some program on Ubuntu. Suppose I want to transfer these files to a folder in Windows. How to find and get these files, which logically are stored in the virtual machine.
View 2 Replies View RelatedI'm just trying to know if is there is a way to run the first version of linux in a virtual machine. Since I am very new to this, my aim is to learn something basic on how the first version of linux kernel was built and worked.
View 1 Replies View Relatedok how do you add a rule which allows a virtual machine to connectto ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
View 3 Replies View RelatedI have installed the guest OS on the redhat 5 with XEN. I found the guest OS can be started on host boot UP, but it cannot be shutdown on host shutdown. so,I need to creat the script to shut down the virtual machine
The script as following:
# Get the VM list
VMLIST=`xm list`
for VM in $VMLIST
do
xm shutdown $VM
# delay a bit the next sequence
sleep 3
done
run the script,the virtual machine can be shutdown, bu at the same time the error info will appear:
Error: Domain 'Name' does not exist.
[Code]...
So,all the strings in the line of the output regard as the Name of VM The script will run the command like "xm shutdown Time(s)" ,"xm shutdown State",and so on. How Can I get the guest OS name in the output of "xm list" I just nend to get the virtual machine name, the script to run the command "xm shutdown windows2003" and "xm shutdown windowsXP" how to find the strings "windows2003" and "windowsXP" when input the command "xm list"
If a request comes in for a page, which Virtual Machine (assuming there are several on the machine) does the request go to?
View 1 Replies View RelatedI have Fedora11 machine : 192.168.0.3 ( Bare metal )--> vinay.linux.com
Another Fedora 11 machine : 192.168.0.4 ----> test.linux.com
Virtual Machine on FC11 : 192.168.0.6 ( VM )-----> centos.linux.com
I have DNS configured on Fedora11 machine, Also I have checked the connectivity of centos.linux.com to port 53 of DNS.
Here is my /etc/named.conf file of FC11 machine code...
how to make virtual machine using xen kernel and nfs.
View 1 Replies View RelatedBeing new to Linux I am not sure of which Virtual software to use in my Opensuse Linux? I want to try FreeBSD again but I want to use some type of Virtual Machine .
View 3 Replies View RelatedI want to do two things: Set up a virtual machine on Windows 7 to run Ubuntu Set up a way for the virtual machine to read the windows disk or windows to have read/write access to the virtual machine's disk. My goal is to have a place where both Ubuntu and Windows can read and write. What software is good for this task? Are their free programs that can run virtual machines? Also if my machine is running Windows 7 64-bit, can I install Ubuntu 32-bit? Or am I forced to use Ubuntu 64-bit? Or does it not matter?
View 1 Replies View RelatedI have Ubuntu guest OS installed on Virtual Box on windows. But I have forgotten all passwords for user and root accounts. But when I try to get into grub by pressing escape at startup, nothing happens. How do I get into grub loader to change the password? Acually no grub menu is shown when it starts.
View 2 Replies View RelatedI am looking for step-by-step guide to do so. I can go for any easy to work with Linux distribution , may be UBUNTU. But Hyper-V page says it officially supports only SUSE and REDHAT, others can be done on owner's risk.
I dont need future compatibility etc as yet, just need to do some experiments, so any distribution would be fine. FYI - I am trying BOINC installation and testing.
I want to remove Virtual Machine and I have deleted VM folder from hd. It's still shown in the VirtualBox GUI but the settings are grayed out.
View 2 Replies View RelatedI have installed Oracle Enterprise Linux Server 5 as host OS and Windows XPP(Guest OS) as virtual Machine by VMWare Player on standalone Desktop PC.Now I want to run all commands of Linux from Windows XPP.How should I proceed?
View 2 Replies View Related