Ubuntu :: Host U9.04 Hangs With Virtual Box 3.1
Jan 20, 2010
Few days back I have installed VirtualBox in my ubuntu 9.04. Then in VB I have installed one distro of linux based on ubuntu 8.04 ( BAISHAKHI LINUX). Since then my system ( i.e., host ubuntu 9.04,) started hanging and behaving quiet irregularly. The GUI package manager of my host ubuntu 9.04 does not responding each time I start it from system>administration; rather its gets hanged and I have to use "force quit". I have installed Virtual Box 3.1.
View 1 Replies
ADVERTISEMENT
Oct 30, 2009
Bit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies
View Related
Jul 3, 2009
apache virtual host to limit the concurrent connections of virtual hosts? Taking into account the host of each virtual user's home directory can also have more than one subdirectory, which should be restricted to a subdirectory. Is beyond the control of the operation of these sites in a subdirectory. Best local restrictions or limitations to the overall situation.
View 1 Replies
View Related
Apr 21, 2010
I'm having an issue with setting up the virtual hosts on my web server. I have 2 virtual hosts (example1.com, example2.com). example1.com works but example2.com is sent to the index file of example1.com. I did some searching on google and it seems the problem might be with my /etc/hosts file.
First virtual host that the second is also directed to...in sites-available/sites-enabled (note port 80 is blocked by my isp so I use 8080)
Code:
Second virtual host file
Code:
And my hosts file
Code:
# The following lines are desirable for IPv6 capable hosts
Also I'm using a dyndns.org...would that make a difference?
View 2 Replies
View Related
Jan 8, 2010
Is there anyway for one Virtual Server to access the main host, or another Virtual Server? Or would they be totally 100% independent?
View 5 Replies
View Related
Nov 22, 2010
I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies
View Related
Apr 16, 2010
I currently have a virtual host setup to accept SSL connections as follows:
Code:
<VirtualHost *:443>
DocumentRoot "/var/www"
SSLEngine on
SSLCertificateFile /etc/apache2/ssl/apache.pem
[Code].....
How would I change it so that it can only be accessed via HTTPS ??
View 4 Replies
View Related
Apr 30, 2010
I upgraded karmic to lynx today and I'm stuck with some weird behaviour with one of my virtual hosts. The virtual hosts under /var/www/site work but my virtual host for DAVICAL which points to /usr/share/davical/htdocs/ doesn't.
Navigation to any html pages works but php files just show up blank!
Has there been a configuration change in lynx for virtual hosts outside of /var/www?
View 6 Replies
View Related
Feb 20, 2011
How do i remove a virtual host? i created it and i need to remove it from site-available
View 2 Replies
View Related
Aug 19, 2010
I have servera.domain.internal which has port 80 forwarded to the web as example.com. I have serverb.domain.internal which I want to forward on port 80 as subdomain.example.com. How to Show Apache server behind an apache server? How do I setup the virtual host on the internet exposed server? This is ubuntu 8.04
View 2 Replies
View Related
Nov 5, 2010
Migrating Virtual Guest to Native Host
I have been using ubuntu server and desktop on virtual box for a while now. I have come to enjoy it more than being in Windows. I would like to install it natively. I am wondering. is there any way I can take my virtual machine and apply what I have done there to a new ubuntu install?
I have a ntfs hard disk, will ubuntu resize that for me at install?
Any good apps for backing up all my my firefox data and then applying that to my firefox in ubuntu?
I need to keep windows for some stuff for work, and for some games I like.
View 1 Replies
View Related
Jan 24, 2011
I've just installed LAMP. http://localhost/ page works fine. I need to create some virtual hosts. Localhost page is situated in /var/www/. It's normal for me, and I wanted to created virtualhost (in /var/www/vhost1) But it doesn't open in browser. Where is my mistake?
/etc/apache2/ports.conf
Code:
NameVirtualHost *:80
Listen 80
<IfModule mod_ssl.c>
# If you add NameVirtualHost *:443 here, you will also have to change
# the VirtualHost statement in /etc/apache2/sites-available/default-ssl
[Code]...
View 7 Replies
View Related
Feb 22, 2011
I am trying to set up an Apache2 virtual host to test sites I make from my own computer.
I used this guide to set up my LAMP and vHost, The LAMP stack seems to be working great, but I run into some problems when I try to set up a vHost
As described in the guide I
1. made a new directory in my home folder /home/[myname]/www/test.dev to put my site in (it currently contains a simple index.html file as a test).
2. In /etc/apache2/sites-available I copied the file "default" and renamed it "test.dev"
3. I edited the content of "test.dev" to look like this:
Code:
4. I enabled the site using the command "sudo a2ensite test.dev". I then restarted apache "sudo /etc/init.d/apache2 reload".
5. I edited the hosts file: "sudo gedit /etc/hosts" to look like this:
Code:
6. I restarted apache "sudo /etc/init.d/apache2 reload".
Now if I enter "http://test.dev" in my firefox's adress bar I just get the apache2 "It works!" site. What is going wrong to cause firefox to show the "It works!" page rather then my own test site?
View 1 Replies
View Related
Apr 28, 2011
I needed to create a virtual host for a php project I'm working on. Rather than using command line and text editors, I installed webmin to accomplish this and hopefully perform other server configuration in the future. When I created the virtual host and tried applying the changes Apache wouldn't re-start, and still doesn't restart after complete re-boot. It's getting hung up at the end of apache2.conf, which is trying to include /etc/apache2/sites-enabled/000-default.
When I look at 000-default from a File Browser, it's a linked file to etc/apache2/sites-available/default I can open both the linked file and actual file in a text editor, and it looks fine. When I view the directory, /etc/apache2/sites-available from shell, the default file isn't visible. It seems this "invisibility" is probably related to the error, which is preventing start-up. Can anyone explain why the file would be visible from the Ubuntu File Browser GUI but not from the terminal, and how I can fix so apache can recognize this on start-up?
View 3 Replies
View Related
May 5, 2011
I want make several virtual Host using apache2. Each virtual host will have virtual domains in localhost with different root.
View 4 Replies
View Related
Jul 7, 2011
I am currently running ubuntu on a qemu-kvm virtual machine, and the host is fedora. I would like to mount a folder of the host machine on my VM, but never succeeded. The result of the command is :
root@armnlib-kvm:~# mount -v 192.168.1.10:/nfs /nfs
mount: no type was given - I'll assume nfs because of the colon
mount.nfs: timeout set for Thu Jul 7 06:02:43 2011
mount.nfs: text-based options: 'addr=192.168.1.10'
[Code]....
View 2 Replies
View Related
May 13, 2010
I recently installed VirtualBox 3.1.8 r61349 from the deb file virtualbox- .1_3.1.8-61349~Ubuntu~lucid_amd64.deb onto a recent clean install of Lucid Lynx on my HP p6210f (6144 MB RAM, AMD Athlon II X4 620 CPU). I then imported a friend's VM and tried to boot it. The VM consistently hangs with the following showing on the console (this is the last 3 lines, for context):
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
I thought initially it was a problem with my friend's VM, so I decided to create a new VM from scratch, and boot from a CentOS-5.4-i386-DVD instead, which I have done before with previous versions of VirtualBox. When I do that, I'm able to select my installation method (so I know it's booting from the CentOS ISO), and then it hangs at exactly the same point. I couldn't find any other mention of this problem, but it's a pretty recent release of VirtualBox - I think just days old.
The VM: OS Type=RedHat (presumed 32-bit), 1 processor, 1024 MB RAM
View 5 Replies
View Related
Dec 29, 2009
installing Virtual Box on Fedora 12 (host O/S)? I need to install Fedora 12 then Virtual Box, then any other OSes as VMs? A list of available VMs under Fedora 12 / Virtual Box would be nice as well with any helpful hints on installing these VMs.
View 1 Replies
View Related
Dec 30, 2009
Anyone have any guides to installing Virtual Box on Fedora 12 (host O/S)? I need to install Fedora 12 then Virtual Box, then any other OSes as VMs? A list of available VMs under Fedora 12 / Virtual Box would be nice as well with any helpful hints on installing these VMs.
View 3 Replies
View Related
Oct 5, 2009
On my server I have connected domain: www.my-first-domain.com which is installed in /var/www/first
For that domain I have installed virtual host.
Quote:
I dont know why, when I will put address my-first-domain.com instead of www.my-first-domain.com server redirect that domain to folder /var/www/.
View 8 Replies
View Related
Jun 5, 2011
In the past I found some great help on this forum, so here goes. Bare with me because it's a long story. I'll try to be as complete as possible. I've installed and configured OpenLdap on a virtual machine with ip 192.168.39.134. I've added 2 users via LAM. In the ou WikiUsers and the domain is wiki.local.
I've then created another host with ip 192.168.39.133 with mediawiki installed on it. Then I added the extension LDAPAuthenthication. In the LdapAuthentication file I added this code (only the last paragraph is mine, I added the others to show it's location in the script):
Quote:
$path = array( $IP, "$IP/includes", "$IP/languages" );
set_include_path( implode( PATH_SEPARATOR, $path ) . PATH_SEPARATOR . get_include_path() );
[code]...
I know I'm close because I can't register any new users or accounts on the mediawiki site. Although I could before I added the LDAP service. This is indeed all just to test and get to know how LDAP works. That's why it's all virtual in VMWare. I did not really configure anything on the LDAP, i just installed it and chose a domain (wiki.local).
View 5 Replies
View Related
Jan 28, 2010
I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
View 7 Replies
View Related
Feb 19, 2010
Im looking to use the Apache2 GeoIP mod to block countries from accessing a website. I've searched, but cannot seem to find any information on how to insert the code into the virtual host file. Does anyone know how to get this working or can point me in the right direction?
View 2 Replies
View Related
Jun 4, 2010
My goal is a testing server with an apache virtual host for each site that I'm working on, with fairly painless setup for each new job.For example, I want http://site-a.mydomain to server this document root /home/client-a/site-a/public_html (or something to that effect)Ideally, DNS will use a wildcard to point http://anything-i-type.mydomain to the testing server, and apache will have a dynamic virtual host definition that will do a little magic so that I won't have to mess with DNS records or add a new virtual host each time I add a new site for a client. I'll worry about that when I get there, just put that out there in case anyone has any tips! for now I just have one little problem that's hurting my mood-
It looks like I've got my DNS server working just fine, so yay there- BUT my first attempt at adding a virtual host isn't working quite how I expected- meaning that site-a.mydomain now serves up the correct document root, but when you put http://site-a.mydomain into the browser's address bar, the address bar is then updated to http://10.0.1.100/site-a/public_html - bogus!! I must be missing an option like "FunnyBusiness Off" -
root@ubuntuvm:/etc/apache2/sites-available# vim client-a.mydomain
<VirtualHost *:80>
UseCanonicalName Off
ServerName site-a.mydomain
DocumentRoot /home/client-a/site-a/public_html
</VirtualHost>2
View 2 Replies
View Related
Jul 23, 2010
We got a new server with 2 network interface cards with 4 MAC addresses in total. We would like to run two virtual machines (vserver1 and vserver2); one should connect via eth1, the other via eth2, and the host (mainserver) via eth0. The content of /etc/network/interfaces is as follows:
[Code]....
A connection from mainserver to vserver1 or vserver2 is not possible; a ssh connection from mainserver to vserverx ends with a login to mainserver.
View 2 Replies
View Related
Dec 2, 2010
I couldn't find a clear answer to this, but is the linux-image-virtual package for host machines that will contain VMs, or a VM-oriented kernel for guest OS (ubuntu)? I have some guest VMs running on Microsoft's Hyper-V, and was looking for some further optimizations.
View 3 Replies
View Related
Jan 18, 2011
I've set up a server running Ubuntu 10.10 (desktop) with apache. Problem is: When I try to configure multiple virtual hosts I can only access the first one. I'm sure that I'm missing something basic in my setup, but I cannot seem to figure out what.
What I want is simply two virtual hosts, one only available on the LAN where I can test my php files and one "live" available from the outside.
Heres what I've done:
Installed Apache2.2
Copy /etc/apache2/sites-available/default -> /etc/apache2/sites-available/dev
Modified "dev" config DocumentRoot and Document to point to /var/www/dev
Modified "dev" config VirtualHost to <VirtualHost *:1337> (port change right?)
Modified "default" config DocumentRoot and Document to point to /var/www/live
[Code].....
Live works fine, but dev cannot connect (as if there is no server there).
View 2 Replies
View Related
Mar 31, 2011
I'm lost I can't get past the 403 forbidden errorI have a directory /home/russ/public_html with a single index.html file
HTML Code:
<html>
<body>
[code]...
View 3 Replies
View Related
Jun 19, 2011
I have an Ubuntu 10.10 host running in VirtualBox 4.0.8 r71778, and I need to setup a LDAP authentication network between two VM's: a Maverick-based distro and Ubuntu Server 11.04.
Screenshot of the two running perfectly fine:
[URL]
Using NAT, I can have the two VM's up and running on VBox, but they get the same IP (10.0.2.15).So I googled it and quickly found out that I needed to change the VM's network interfaces to Bridged Networking. So I tried that. Here's two screenshots of the default configurations:
1- Ubuntu Maverick based distro:
[URL]
2- And here is one of the Ubuntu Server:
[URL]
(I'm Portuguese, that's why there are mixed languages in the UI)It's pretty stupid to explain like this, but whenever I try to start one of those two using Bridged Networking, I get a black screen full of errors (I can't take a printscreen of that, so I took a bunch of pictures - yeah, it's lame, I know ). Then, I have to press the power button to shut down my host, and restart the pc.Here they are:
[URL]
Where I think the problem is:
[URL]
My host is currently running Linux kernel 2.6.38-10.I have dkms, linux-header-generic and build-essentials installed (and the VB extension package too)And my host is a laptop, connecting to the internet using the router my ISP provided me.How can I solve this? Is this some kind of bug regarding 2.6.38-10 kernel?I don't have other pc's to test my LDAP authentication, so I needed the two VM's to have different IP's.
View 4 Replies
View Related
Jul 9, 2011
I've installed VirtualBox OSE and have a couple of guest OS setup. I am running Ubuntu 11.04 and VBOSE version 4.x (the most current). Now this installs the guest OS virtual harddrives to a folder in my home directory. How do I get other users on the same host machine access to those virtual machines within VB? Currently logging in as another user and going to Applications/Accessories/VirtualBox OSE ... the list of guest machines is empty save of course on my login.
View 3 Replies
View Related
