Ubuntu Installation :: Lynx On VirtualBox OSE Hangs On Boot
May 1, 2010
I am planning on playing with the lynx on VirtualBox for a while just to do some test and maybe update my installation notes before moving everything but just can't get it to work.
Environment details:
OS: 9.10
Kernel: 2.6.31-21-generic
Machine: Compaq Presario B1200, 3 GB RAM, 14 GB available disk space
VirtualBox: VirtualBox OSE 3.0.8_OSE r53138
Problem: After starting up the virtual machine and reaching the purple screen (where a keyboard and accessibility icons are displayed at the bottom part), everything just goes black with an un-blinking cursor on the top-right. I already tried recreating the virtual machine, removing and creating a number of times, and I've also tried reinstalling VirtualBox but the problem still persists.
View 4 Replies
ADVERTISEMENT
May 21, 2010
I recently installed ubuntu 10.04 lts. Whenever i boot ,it hangs the moment i log in. I had the same problem with 9.10 as well.
View 1 Replies
View Related
May 11, 2010
I have been running 32 bit karmic (and before that jaunty, intrepid and hardy) with no problems on my Dell D620 laptop. Since I upgraded to lucid, I get occasional freezes. It often happens at the gnome login screen after I click on my name but before I can enter the password, or upon restore from suspend but sometimes at other times. It doesn't happen all the time but often enough to be really annoying. When the freeze occurs, the mouse pointer responds to the touchpad or an external usb mouse, but no mouse button events are recognized and the keyboard has no effect either. I can't switch virtual terminals or anything. If the system was up and had a DHCP address at the time of the freeze, I believe the network still responds to ping. The only thing I can do to get the system back is hold the power button for 30 seconds until it powers off. The desktop CPU temperature monitor does not indicate excessive heating at the time of the freeze. I don't know whether I should try a re-install of lucid, or just go back to karmic.
View 4 Replies
View Related
May 13, 2010
I recently installed VirtualBox 3.1.8 r61349 from the deb file virtualbox- .1_3.1.8-61349~Ubuntu~lucid_amd64.deb onto a recent clean install of Lucid Lynx on my HP p6210f (6144 MB RAM, AMD Athlon II X4 620 CPU). I then imported a friend's VM and tried to boot it. The VM consistently hangs with the following showing on the console (this is the last 3 lines, for context):
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
I thought initially it was a problem with my friend's VM, so I decided to create a new VM from scratch, and boot from a CentOS-5.4-i386-DVD instead, which I have done before with previous versions of VirtualBox. When I do that, I'm able to select my installation method (so I know it's booting from the CentOS ISO), and then it hangs at exactly the same point. I couldn't find any other mention of this problem, but it's a pretty recent release of VirtualBox - I think just days old.
The VM: OS Type=RedHat (presumed 32-bit), 1 processor, 1024 MB RAM
View 5 Replies
View Related
May 20, 2010
When I try logging in using any user name, ubuntu just returns to the login screen. I cannot actually log in. I used the recovery mode to create a new login with password 123456, and the same thing happens. What could it be? Ubuntu worked just fine for a while, then DKMS started causing problems, I had errors with upgrades, software installs/uninstalls, then my sound went. I found a great fix for the sound (https://help.ubuntu.com/community/SoundTroubleshooting), the sound came back, but then I could not log back in again. I cannot find any help for this issue, and had to install 9.10 Karmic Koala, and that's what I have been using for the past couple of days.10.04 has been fairly buggy for me and I am considering staying with 9.10, or going to another Linux distro.
View 7 Replies
View Related
Jul 14, 2010
I am running Lucid Lynx kernel 2.6.32.24. Soon after the latest kernel update I noticed that Virtualbox would not launch when I clicked on the icon. I have searched the Internet for days, tried numerous possible fixes, over hours of effort, but can't get it working at all. Ubuntu Lucid runs great!! There are no errors just a few blinks of the hard drive indicator and nothing. Is there anyone out there that has seen this same issue?
View 9 Replies
View Related
May 11, 2010
I am preparing to do a fresh install of lucid lynx dual boot with vist@ Currently I am running 9.04 in this configuration. The install guide for Lucid says the new grub2 doesn't support more than 2 operating systems. plus I apparently can't edit it either. Besides vist@ there is a hp recovery partition which has a seperate entry in my existing grub. Does this mean I can't use the lucid desktop disk for a fresh install because I would have 3 operating systems? Lynx, vist@ and HP recovery partition.
I only have two applications left I am using on vist@, but I have no recovery disk, only an old image for my vist@. I am very concerned about this upgrade. 5.04 went smooth and each one since then has been a bit harder. I could not get 9.10 to run and had to go back to 9.04. I hope I am not at the end of the road. How about using grub instead of grub2?
View 9 Replies
View Related
Jun 9, 2010
I've planed to install Ubuntu Lucid Lynx 10.04 x64 on my rig. dual boot setup windows 7 preinstalled Intel ICH10R RAID0 manual partition setup 200mb ext3 /boot 2gb swap 100gb ext4 / GUI installer can see my RAID and allows me to create this partitions manually. But when install begins i'm getting error :
Quote: The ext3 file system creation in partition #5 of Serial ATA RAID isw_dgaehbbiig_RAID_0 (stripe) failed
[Code]...
fdisk -l from Live cd shows me separated HDDs without RAID0 wrap (sda and sdb) Also in advanced section where i can configure boot loader default is /dev/sda, which is part of RAId_0. I'm checking isw_dgaehbbiig_RAID_0 as location for loader, assuming that this would be MBR. am i doing this step right?
View 4 Replies
View Related
Jul 21, 2010
after upgrading to lucid lynx ubuntu doesn't boot with the new kernels 2.6.32-22-generic and 2.6.32-23-generic (also in recovery mode). But it's does boot with the previous 2.6.31-21-generic kernel. At the time i was hoping to wait it out, but a new kernel has come and the problem persisted. I've been trying to find a solution for this but somehow, amid lots of failed boot blank black screen threads, i didn't relate to any solution. The boot seems to go well until a pixelated logo appears (before the login screen), then goes to a blank black screen and there it stays stuck with no remedy. Looking into dmesg logs - albeit some differences between 2.6.31-21 and the newer 2.6.32-23 - the failed boot seems proper in both logs. In Xorg logs the differences are bigger but i cannot pinpoint a source for this problem.
View 2 Replies
View Related
Apr 27, 2010
I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.
Rough scenario is:
(Original Vista machine had)
C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive
D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.
So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition
... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.
Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.
I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.
So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...
I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.
...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6
Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!
Bootlog below will show what sort of mess I'm in:
Code:
Boot Info Summary:
View 2 Replies
View Related
May 14, 2010
I just did a distribution upgrade on my laptop from 9.1 to 10.04, and it went fine for the most part except this issue. After it boots up, I don't see any window titles/scrollbars/borders and on clicking the icon for "Show desktop" on the bottom left I see the following error message: "Your window manager does not support the show desktop button, or you are not running a window manager."
After googling a bit, I realized that gnome-wm is not starting automatically and so I have to manually start each time to see the windows working properly. Can somebody tell me if there is a way to make sure that gnome-wm starts automatically? I know I can put it in my .bashrc but I want to do it the correct way if possible. If not, I will have to go with that workaround
View 4 Replies
View Related
Nov 20, 2010
I'm trying to create a Windows XP VM using VirtuallBox, and creating/formatting the disk goes OK, but when it's actually running setup it hangs only a few minutes in. I'm using VirtuallBox 3.1.10 on Ubuntu 10.04.
View 3 Replies
View Related
Jul 3, 2010
I think I've got a graphics/sound compatibility issue--both are onboard, but have no idea what to do. 10.04 will run in recovery low-graphics mode but won't load otherwise.
I have an old Gateway MX6030 / MA2 from 2005, 1.4Ghz Celeron, 1024 MB RAM. It had 9.04 on it. I got it out, thinking I could use it to store and remotely access research files for Mendeley and backup other data from my primary machines. I was running into wireless connectivity programs, so rather than fix it I figured I'd upgrade to through to 10.04 and plugged it into the router. 9.10 was a little choppy with the sounds when booting up, but worked. 10.04 won't boot properly. It gets to the Ubuntu splash screen with the little dots, which all turn red, then goes straight to a grey screen. The hard disk stops thrashing, and that's it.
If I hit ESC to bring up the grub menu, I can enter recovery mode and use the low-graphics startup to get into 10.04. Sound is still choppy on startup, but wireless, video, etc. all work. I tried to use a USB bootdisks with both 10.04 and Xubuntu 10.04 and got the same issue. The Ubuntu live boot can get to the menu but freezes after I make a selection. Xubuntu just brings up a low-res "XUBUNTU" image and freezes right after that. Hard disk stops turning, and the machine stops accessing the USB disk. Nothing happens.
Is there a way I can access 10.04 low graphics as the default boot? Is this a driver issue? This is a beginner question, obviously, and really, my goal here is just to be able to access the machine remotely so I can keep files for Mendeley in a single place rather than across two machines and three OSes. I don't know if I have the time or patience to learn how set up another machine as an FTP server to try and install through that route.
View 1 Replies
View Related
Dec 8, 2010
I loaded Ubuntu onto my USB using the USB installer, and then attempted to create a persistent drive (>4GB) according to the link :http://www.pendrivelinux.com/create-...per-partition/
But when I boot from the USB it hangs. I am new to Ubuntu, so I cannot give a lot of details.
When booting from the USB, it goes to the setup screen where I select boot from the USB. A list of commands appear on the screen (it's too quick,to read) and then it arrives at the intro screen with the Ubuntu symbol. On this screen it hangs.
Any suggestions on how to fix this.
View 4 Replies
View Related
Dec 25, 2010
I wrote the ISO to a USB drive I had using the Universal USB Installer, and I put it into my new Acer Aspire One D255 netbook, and set it up so that it would be the first thing it booted to. I got past the ISOLinux loading screen, and now it's just hanging at a black screen with a bit of text:
Intel(r)PineView PCI Accelerated SVGA BIOS
Build Number: 2001 Accelerated PC 14.34 03/01/2010 02:34:31
DECOMPILATION OR DISASSEMBLY PROHIBITED
Copyright (C) 2000-2003 Intel Corp. All Rights Reserved.
Anyway, it's just sitting there. The USB stick isn't doing anything, it's not flashing or jittering, it's just slowly pulsating like it usually is when it's not doing anything.
View 4 Replies
View Related
Feb 20, 2010
As a mature architecture student with 1.5 years under my belt. I have just built a new computer for this CAD work and have just set it up to dual boot with Ubuntu. But I am wondering if a VM might work for me, although I have heard they slow the CAD programs down.Also I have set up my system with two hard drives, one for the OS and the other for storage. I intend to image each drive and store it on the other for backup. Would I be better with one OS on each disc? or stick with what I have.**Although I am aware of Gimp, I have photoshop and know how to use it well so will stick with it for now.
View 1 Replies
View Related
Aug 12, 2010
I was running Ubuntu 9.10 on my Toshiba A40 Laptop and decided to take the plunge and upgrade to 10.04. Everything seemed to go well until the Restart. Now it only gets to the Splash Screen (Purple Screen with "Ubuntu" and dots under it) and then there is a flash and the text becomes blocks briefly before going to a blank screen! It seems like it might be a video problem but...
View 1 Replies
View Related
Feb 21, 2011
I have just installed a fresh ubuntu 10.10 and i want to install catalyst ati driver on ubuntu.
I have tried installing a 11-2 driver version before, but it hanged on the first boot.
Then i decided to have a fresh ubuntu installation, and then get the propriate driver that automatically download and install by driver applet. But the hang repeat..
However, when i trying to fix this stuck, i access the recovery mode>prompt from root, and then i type STARTX, and everythings worked beautifully, fglrxinfo works fine. But if i got SERVICE GDM START, it hanged again.
I have searched many threads about this problem, i have tried "dpkg-reconfigure xserver-xorg", which seemed to work perfectly with many cases, but not mine.
View 6 Replies
View Related
May 3, 2011
My GRUB is at v1.5 and have just updated UBUNTU to 11.04 from 10.10 I have a AMD processor and am using the 64 bit version of UBUNTU
The system will not start normally, it will hang. with this on the screen
Boot from (hd0,0) ext3 9a590bb3-d88b-40e5-8e48-46c83c0865dd
Starting up ...
I have discovered a way to boot I select the recovery mode then I select failsafeX , next I select restartX . And the system will boot,
I am looking for guidance on what to do to get my system to boot normally without having to use the workaround that I now use,
View 3 Replies
View Related
Jan 27, 2010
I have just installed Karmic on a dual boot system with XP and Ubuntu on separate drives.This set up worked ok with Jaunty. When the boot menu comes up, selecting Linux results in a successful boot. Selecting "Windows XP home edition (on /dev/sda1)" results in the screen changing to blank with the word "Grub" in the top left corner and no further progress.No error codes associated with this message. I've tried suggestions I've seen in various threads but have had no success.
Below is the contents of menu.lst:
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]...
View 9 Replies
View Related
May 10, 2010
I just installed 10.04 from the minimal install cd (twice), and when I boot it up, it runs fsck on the 3 partitions, shows they are clean, and then nothing. I can't even get to recovery mode. I had previously installed 9.10 fine on this computer. I can't even find out what the real problem is, even with the quiet splash disabled. It just stops after successfully running fsck.
View 5 Replies
View Related
May 15, 2010
I was really enjoying the speediness of 9.10 on my HP Pavilion ze4900. Once I got the wireless driver loaded correctly, anyway. Tried to do an on-line upgrade to 10.04, but figured I should have had a hard-wired internet connection when I got installation messages that "Could not set up..." the network. But, installation continued without any other apparent issues. As soon as it rebooted at the end, the problem started. It hangs right after the ubuntu logo, with a completely blank screen.
My questions:
1) Can I get this to start booting properly?
2) If not, what would be the best way to retrieve my evolution mail files, so I can do a clean install? If I boot from a CD, will I be able to retrieve those files and maybe put them on a memory stick?
View 3 Replies
View Related
Jan 31, 2011
Every time I upgrade to the current beta releases (natty) the boot process hangs mostly because of nvidia desktop graphics problems. Luckily the system is still running and remote login to console prompt works too. Is there really no reliable way to reset the graphics (and the rest) to minimum configuration. I am really tired of having to try all the repair options to get the desktop running again. How can Linux ever become a reliable solution if everything takes hours to fix and not even the boot process stays the same from one version to the next.
View 4 Replies
View Related
Apr 13, 2011
I have successfully installed Ubuntu 10.10 on two older computers, one a laptop using wubi, and the other an older Dell 8250 using an install CD with a dual boot on one drive. Now I'm trying to install Ubuntu 10.10 32 bit to my Windows 7 64 machine which has one C: drive with one partition and plenty of free space, with the goal of installing Ubuntu to a logical second partition on an external hard drive attached with a USB connection.
Unfortunately, after I boot from CD and start the install, I can't get past the install screen titled "Preparing to install Ubuntu", on which I have checked "Download updates while installing" and "Install third party software". I have three green checks for the install criteria and am connected to the internet. After I click "Forward", the spinning "busy" mouse icon continues to spin for about 20 minutes (I haven't gone longer than this) but does not progress me to the next screen. I can quit the install by clicking on "Quit".
View 9 Replies
View Related
Sep 13, 2010
I have been messing around with F13 in VM VirtualBox for awhile now. I have read in some places that it is better to install F13 into its own partition on the hdd creating a dual boot system for, in my case, Vista and F13. Any truth to this? I have been having problems with system settings in F13 while using VB. i.e.: sometimes the system will see 3d support, other times it won't. Sometimes it will see ethernet eth0 and then other times it won't. All my hardware from my MB to Display is supported according to the documentation I have looked at.
View 2 Replies
View Related
May 8, 2010
I've just installed Ubuntu 10.04 netbook remix on an acer Aspire One D250, specs below: Processor Name: Intel Atom N270
Processor Speed: 1.6 GHz
RAM: 1 GB
Graphics Card: Intel Graphics Media Accelerator 950
Storage Capacity: 160 GB
I had to resize the win partition, making a new partition for Ubuntu of about 15GB. I then installed the system. Everything went without problems. I was able to boot once, and verified that everything worked as intented.
However, after that, 90% of the times I reboot the bootup process hangs at a blank screen (with a blinking underscore), immediately after grub selection. If I select "recovery mode" in grub I can see the bootup messages, but the process hangs, all except one time, right after:
Code:
[2.304418] ata2: DUMMY
[2.304487] ata3: SATA max UDMA/133 abar m1024@0x58344000 port 0x58344200 irq28
[2.304584] ata4: DUMMY
and does nothing more. There are no error messages or hints to the source of the problem, to my eyes.I've noticed that sometimes even the loading screen of the live cd will hang indefinitely, leaving me no choice other than a hard-reboot.
The rare times that the system does boot normally, everything works normally. I've tried installing using both the ext4 and ext3 filesystems. I couldn't find anything like this on the forums. Am I doing something wrong? Do you need more details?
View 9 Replies
View Related
May 15, 2010
In the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
View 8 Replies
View Related
Aug 7, 2010
I just upgraded to 10.04 and it went very smoothly. Only problem is that this version now tries to check a couple of hard drives that are external and not attached to the system. They were set up some time ago and the boot will not proceed unless I manually enter "S" to skip. I have removed folders for these disks that were in /media/... but that didn't solve the problem.
View 2 Replies
View Related
Sep 12, 2010
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
View 1 Replies
View Related
Nov 24, 2010
i have ubuntu 10.04 and xp installed in two different hard disc partitions. everything was fine until i came from vacation and found that after turning on my pc it gets hang as soon as the grub menu with duel boot option appears. i cant do anything at that stage, just nothing.keyboard doesn't work also. here one thing to be mentioned that for last few days my pc used to hang frequently in ubuntu 10.04 and then i had no option left but to restart my pc.
View 5 Replies
View Related
